R32 gtr diff

[jlmason]

Since I'm new to swapping parts from car to car on nissans bare with me. Is swapping an R32 gtr rear diff plug and play if you have the axles too? If so is it worth it?

[180wanabe1]

No because the spline size where it mates into the hub's is different, you need r32 rear hubs and bearings as well. i believe z32 tt's are also the same but I'm not certain on that.

[[email protected]]

Yea the GT-R axles are the same as the early Q45 and z32tt in size/spline... of course z32 and Q45 came with VLSD so the axle stub at the diff won't work, only the GT-R stubs.

[Sileighty_85]

everyone always forgets the drive shaft pinion

http://i73.photobucket.com/albums/i235/Neil_85/GTR/R32%20Diff_zpsojewr9rp.jpg

[edmorl]

everyone always forgets the drive shaft pinion

http://i73.photobucket.com/albums/i235/Neil_85/GTR/R32%20Diff_zpsojewr9rp.jpg

that's actually a z32 TT diff, but the gtr has the same input shaft. All you have to do is swap it out with a regular non-abs s13 one

[Sileighty_85]

No shit, Pic was for reference to input shaft.