FS: Fully Built RB25DET

[hammtheman]

Motor has zero miles, never ran. Was completed November of 2014. has been covered for the past 8 months.


Up for sale is my RB25 that was just recently completed by R/T tuning in Montgomeryville, Pa. I have all reciepts from the build with all the work completed. I have all but 13,000 into this motor. In the photos there is a fuel rail, injectors, wiring harness, mounts, and a turbo set up, they are not included. I will possibly cut a deal to include them. Not trying to make any money on this motor, more trying to get a bit back. I can ship the motor, but obviously i will need the buyer to pay for that. Please send me a message with any questions. I will possibly part out the motor but only into halves. The head will be more expensive because of the solid lifter conversion. I understand this is a salty price but this thing was built with the best and meant to handle the power i wanted. Thanks

Asking: $9,500 ORO

RB25DET built by RT Tuning

PARTS

Wiseco forged piston set - RB25DET (86.5mm bore , +.020" / 8.0:1 - 8.4:1 compression ratio)
Eagle connecting rod set (RB25DETT / RB26DETT)
COSWORTH MAIN BEARING SET RB25DET
COSWORTH ROD BEARING SET RB25DET
Cometic Street Pro top end gasket set (Nissan RB25DET)
Cometic Street Pro bottom end gasket set (Nissan RB25DET)
Nissan N1 oil pump (RB25DET / RB26DETT)
Greddy timing belt (RB25DETT / RB26DETT)
Timing belt tensioner
Timing tensioner spring
ARP head stud kit (Nissan RB20 / RB25)
ARP Main Bearing Stud Kit
Nismo high performance water pump (RB25DETT / RB26DETT)
Nissan OEM thermostat
Cometic Nissan RB20/25 .030 inch MLS Exhaust Manif
NGK BKR7E spark plug
Super Spark coil Packs - R33 Series 1
TOMEI LIFTER SHIM 2.98MM
TOMEI LIFTER SHIM 2.86MM
TOMEI LIFTER SHIM 2.34MM
TOMEI LIFTER SHIM 2.12MM
TOMEI INTAKE CAM 270-10.25
TOMEI EXHAUST CAME 270-10.25
TOMEI ADJUSTABLE PULLEY
TOMEI SOLID LIFTERS
TOMEI SOLID LIFTER SHIM SET
TOMEI SPRING RETAINER KIT
Supertech Exhaust Valves (Solid Lifter Conversion)
Supertech Intake Valves (Solid Lifter Conversion)
Earls -10AN Engine Block Adapter (Oil Return)
Earls -4AN Engine Block Adapter (Oil Feed)
Raw Brokerage Extended Crank Collar
Spool Twin Cam Cylinder Head Oil Drain Kit
ISIS Intake mainfold powdercoated Black Stardust - Port Matched to head
Raw Brokerage Underdriven alternator and water pump pullies powdered in white mettalic
Raw Brokerage Oil Filter Stud (Direct to Block)


Work Completed By Machine Shop

Machine Shop Service -- Grind crankshaft snout and install oil pump drive
Machine Shop Service -- Magnaflux and polish crankshaft
Machine Shop Service -- Bore and hone 6 cylinder block Machine Shop Service -- Deck 6 cylinder block
Machine Shop Service -- Align hone for main stud installation.
Machine girdle in bridgeport, align hone with studs, clearance mains and rods.
Clean, pressure test and check for cracks
Port cylinder head and manifolds for performance application. Convert cylinder head to solid lifters.
Spec out and install correct valve shims.
Perform valve job on 6 cylinder head with 4 valves per cylinder. Mill Cylinder head to surface spec


Cost in Parts - 7,680
Machine Shop Costs - 5,055

http://i599.photobucket.com/albums/tt71/hammtheman/20141201_192750_zps2b7794a6.jpg (http://s599.photobucket.com/user/hammtheman/media/20141201_192750_zps2b7794a6.jpg.html)
http://i599.photobucket.com/albums/tt71/hammtheman/20141201_202016_zpsf856995e.jpg (http://s599.photobucket.com/user/hammtheman/media/20141201_202016_zpsf856995e.jpg.html)
http://i599.photobucket.com/albums/tt71/hammtheman/20141206_153746_zps3e5df2cd.jpg (http://s599.photobucket.com/user/hammtheman/media/20141206_153746_zps3e5df2cd.jpg.html)
http://i599.photobucket.com/albums/tt71/hammtheman/10556460_10153201342999465_7377892804396860753_n_z ps5e63a5b3.jpg (http://s599.photobucket.com/user/hammtheman/media/10556460_10153201342999465_7377892804396860753_n_z ps5e63a5b3.jpg.html)
http://i599.photobucket.com/albums/tt71/hammtheman/20140826_165056_zps8ef75ef3.jpg (http://s599.photobucket.com/user/hammtheman/media/20140826_165056_zps8ef75ef3.jpg.html)

[s14boy]

Sweet build best of luck with sale.
Also, just wondering as I don't believe you posted it but is this a fresh build with 0 miles or has it been ran?

-Mike

[hammtheman]

Oh yeah ill edit it. this motor has zero miles, never even installed in the car.

[hammtheman]

will part head from block. bumpppppp

[hammtheman]

Will part out or trade for a motorcyle or other things that peak my intrest

[240o'clock]

Motor has zero miles, never ran. Was completed November of 2014. has been covered for the past 8 months.

I understand this is a salty price but this thing was built with the best and meant to handle the power i wanted. Thanks

Asking: $9,500 ORO


I never understand people that spend over 10 grand to rebuild an engine only to find when they complete the engine they want to sell it. Why spend all the Man hours for labor and money on parts if you're just going to sell it once its complete? (Makes me think they ran into some kind of problem and instead of fixing it they just want to get rid of it and start a new project, Just my opinion.)

Thats what makes me iffy about spending almost 10k on just an rb25 motor, hell i can buy i 2jz for less then half the price and build it up myself so i have the peace of mind that the motor is reliable.

Spending 9.5k on this is pretty much a risk for the buyer, Either he gets what he paid for or he gets screwed and something is wrong with the engine in some way shape or form.

Anyways i do hope you the best of luck with your sale though!

[hammtheman]

I never understand people that spend over 10 grand to rebuild an engine only to find when they complete the engine they want to sell it. Why spend all the Man hours for labor and money on parts if you're just going to sell it once its complete? (Makes me think they ran into some kind of problem and instead of fixing it they just want to get rid of it and start a new project, Just my opinion.)

Thats what makes me iffy about spending almost 10k on just an rb25 motor, hell i can buy i 2jz for less then half the price and build it up myself so i have the peace of mind that the motor is reliable.

Spending 9.5k on this is pretty much a risk for the buyer, Either he gets what he paid for or he gets screwed and something is wrong with the engine in some way shape or form.

Anyways i do hope you the best of luck with your sale though!

this motor wasnt built in some backyard shop or by me. It was built by R/T Tuning, one of the best shops in the tri-state. I have all the reciepts for all the parts, labor, and time spent on this block. I understand where you coming from but this thing was in great hands

[240o'clock]

this motor wasnt built in some backyard shop or by me. It was built by R/T Tuning, one of the best shops in the tri-state. I have all the reciepts for all the parts, labor, and time spent on this block. I understand where you coming from but this thing was in great hands

Which Concludes what i was saying, Let me explain it a little more straight forward this time, Why spend all the money/time/man hours on a engine that once you get complete you dont finally install it so you can enjoy the piece of machinery you spent so much money and time building to make perfect. Me personally if i spent all the money and time on something this nice your damn sure im going to use the hell out of it once its finally completed. Thats all i was saying

[hammtheman]

Pending sale

[hammtheman]

buyer backed out. will part head from block.

[dropedS13]

I did the same thing as this guy did... Once the motor has been gone that long and you have spent that much on it, there is a huge part of you that is afraid something is going to break... Or life changes what was once a dream to build a sweet engine becomes a dream to buy a house... And 10000k goes a long way with that!

[hammtheman]

yeah man thats exactly what happened. im just not big into imports any more and with the current job i have there is little time to actually work on stuff.

[hammtheman]

will part out the build, let me know what you need.

[Mitsubayati]

how much for the alternator and water pump pullies shipped to 95123?

[hammtheman]

Send me a pm

[hammtheman]

will to part out the full build. send me a pm or text me at 484 366 70four8 with what your looking for.

[Mitsubayati]

PM me again.

[hammtheman]

sent you a pm. lets part this bitch out!!!

[hammtheman]

let me know what parts you need, i also have a bunch of stock rb25 stuff id be willing to sell

[hammtheman]

bumpppppppppppp

[hammtheman]

bumppppppppp send me a message

[hammtheman]

daily bump

[hammtheman]

daily bumpppppppp

[hammtheman]

daily bumpppp

[hammtheman]

Daily bumppppp

[hammtheman]

Daily bumpppoo

[hammtheman]

Bumppp it up

[my240issex]

willing to part with clutch and flywheel? if so, pm me.

[hammtheman]

bumpppppppp

[hammtheman]

bump it up

[hammtheman]

bumpppp, willing to part out or even trade for just about anything.

[hammtheman]

Pending sale of the timing set up

[hammtheman]

Daily bumppppppp

[hammtheman]

timing belt, tensioner, and idler sold. price drop to 9,300

[hammtheman]

bump it up, will sell any bolted items seperately

[hammtheman]

daily bump. lets sell some more things

[hammtheman]

Sold the alternator. Have the raw brokerage under driven pulley set off the motor and ready to ship

[hammtheman]

Bumppp it up

[rb27dets14]

$5,055 in machine work!!!they sure saw you coming this isint worth 9k complete with turbo trans and everything else a attached to it....

[hammtheman]

Thanks for your input, and the free bump douche bag

[rb27dets14]

Anytime......

[hammtheman]

bumppppppp

[hammtheman]

sold, please delete