PDA

View Full Version : P2m new item release: High pressure radiator gauge cap!


phase2
06-11-2015, 04:56 AM
http://cdn3.volusion.com/frzxb.uzspe/v/vspfiles/photos/RGC-T14813-HTT-2T.jpg?1433952486

P2M 1.3 BAR high pressure radiator gauge cap available in stock now , dual purpose for high pressure coolant system along with temperature gauge to show the radiator fluid temperature. Great for use for track and cooling system overheating diagnosis. Available for all Honda / Subaru / Toyota / Nissan / Mazda / Mitsubishi.

MSRP: $35.00 / $31.50 (on our website w/FREE GROUND SHIPPING)

BRAIN_Z33
06-11-2015, 06:03 AM
That is freakin cool!

RalliartRsX
06-11-2015, 06:34 AM
Does this work on Koyos as well??

ProjectPanda13
06-11-2015, 08:16 AM
^ curious about the same thing.
Latez

phase2
06-11-2015, 02:20 PM
Its beem awhile, does Koyo take stock type radiator caps or must use with only Koyo caps? This cap will work on all radiator that uses and takes stock tyoe Nissan caps whether stock or aftermarket like Greddy, Blitz etc.

Sent from my D6653 using Tapatalk

da_crew10
06-12-2015, 02:44 PM
Its beem awhile, does Koyo take stock type radiator caps or must use with only Koyo caps? This cap will work on all radiator that uses and takes stock tyoe Nissan caps whether stock or aftermarket like Greddy, Blitz etc.

Sent from my D6653 using Tapatalk

I have a koyo with a blitz cap so this means it'll work.

phase2
06-12-2015, 02:53 PM
Then yes it will work!

Sent from my D6653 using Tapatalk

S-Nation S13
06-16-2015, 07:42 AM
damn now this is sick very smart !!!!

bladetech8
10-27-2015, 08:46 AM
Awesome idea!

TheRealSy90
10-27-2015, 10:51 AM
Would these work when used on a Greddy coolant swirl pot? The radiator gets a dummy cap and the pressure cap is on the swirl pot.

phase2
10-27-2015, 04:47 PM
Would these work when used on a Greddy coolant swirl pot? The radiator gets a dummy cap and the pressure cap is on the swirl pot.

I assumed the swirl pot = coolant breather tank. If so then the swirl pot should already come with a pressurized cap from Greddy, then yes you can use this to replace the pressure cap on the Greddy swirl pot.

taeisbeast
10-27-2015, 06:00 PM
Since the pics arent working

http://cdn3.volusion.com/frzxb.uzspe/v/vspfiles/photos/P2-RGCT14813-HTT-2T.jpg?1433952486

JeffSteph108
12-03-2015, 04:15 PM
Has anyone tried these and know the durability? I'm planning to pick one up today from frsport.

phase2
12-03-2015, 04:23 PM
I will let other chime in, but with our P2M products it is backed by life time warranty against defects. P2M got you covered.

JeffSteph108
12-03-2015, 05:22 PM
I will let other chime in, but with our P2M products it is backed by life time warranty against defects. P2M got you covered.

That's pretty awesome! I just might get one, hopefully I finish with the errands to get to frsport on time. Pretty cool they stock them there as well (my local parts store). Thanks P2M! - Jeff

phase2
12-03-2015, 05:46 PM
FRsport is good choice, thanks for your support. :)

JeffSteph108
12-04-2015, 01:08 AM
http://images.tapatalk-cdn.com/15/12/03/771cde94b30f3e8e23826b06492ae6d4.jpghttp://images.tapatalk-cdn.com/15/12/03/c5ef1e75710793d52acebe7b562dda6e.jpghttp://images.tapatalk-cdn.com/15/12/03/d5b13f4a3bcd96c7b361912b4f49088f.jpghttp://images.tapatalk-cdn.com/15/12/03/0383be7d85c78a3183e342c5f4e69868.jpg

Hey P2M! I just purchased your radiator cap earlier this afternoon from FRsport for $31.32. All I have to say is the cap looks very good, very well built and looks very durable[emoji106] I've seen the Mishimoto rad caps with the thermostat and they don't seem very well built. I also heard from a couple friends the thermostat didn't work after a month or so. So big [emoji106] [emoji106] [emoji106] on the product. Only thing that is so unfortunate for me is that FRsport gave me the wrong part. I came in at the very last minutes due to the errands I needed to run while I was in the area and the customer service was quite rushed. But, there were like 3 other customers that came in around the same time I did. The guy who helped me couldn't really tell me which one I needed cause I had a very complex setup. I am running a 1jzgte VVT-i swapped mx73 Cressida and have a Mizu branded radiator that is for a mk3 supra. So he couldn't really tell me forsure it was going to fit. They sell their parts via make and model. So I got the one for toyota. Just came home not too long ago and checked it out (great product) then took my old radiator cap out and saw the design of it and it was not the same! I mean I would have took off my radiator cap at the shop and made sure I was getting the right one but they were closing and didn't want to have them wait hence my car was still hot. I didn't open the product just looked at it and saw it wasn't the same. What is kind of upsetting is that the guy who checked me out told me, "I can't guarantee that this will fit your radiator so it's final sale..". I was like "well what if I take it home don't open it and check if it will fit?" He tells me again "nope no return.. since I can't (and yes he said "I") guarantee it fits it's final sale no returns.." makes no sense at all to me. Maybe I'm wrong but idk you guys tell me. Their return policy says that i can return an unopened item under 14 days, and IT IS NOT listen in un-returnable items. Oh and he said that to me after he rang me up.. so I'm kinda stuck. I'm going to call them tomorrow and see if I can return but If worst case scenario I can't. I can't even use it and will have to resell it... then get the right one cause it's just pure awesome! Just wanted to chime in. I love it! Great product, keep up the good work P2M! - Jeff

Sent from my SAMSUNG-SM-N920A using Tapatalk

phase2
12-04-2015, 01:26 AM
Hi Jeff,

I am going to write you a PM.