BooZted_Z32
06-08-2015, 10:13 AM
Was bored and looked for a new little project to do and I was tired of seeing my greddy profec boost controller so lamely sitting on my steering Collum housing. So I decided to see where people mount them. Most people mount on the stereo and delete the clock and place in there. I thought it was a cool idea but then I wanted something a little more original. So I only seen some one else do this so I decided to take on the challenge! With a little bit of fiberglass and filler I made a mount on the speedo housing. The guy I saw the idea from just cut a rectangle and filled remaining space with ABS plastic. I wanted a near stock lock so I made mine of fiberglass and touched it up with filler to give it a good finish. Loved the way it came out! Just need to mount and rewire!
Just thought I'd share a little project!
84346
First cut the rectangle.
84347
Made some measurements and fiberglassed the housing to get a direct fitment. Little bit of filler to fill in scratches and imperfections.
84348
Freshly painted flat black(still wet in picture)
Finished product!
84349
8435084351
Just thought I'd share a little project!
84346
First cut the rectangle.
84347
Made some measurements and fiberglassed the housing to get a direct fitment. Little bit of filler to fill in scratches and imperfections.
84348
Freshly painted flat black(still wet in picture)
Finished product!
84349
8435084351