View Full Version : Plug and play turbo
amgsmg
05-26-2015, 01:52 PM
Hey everyone,
I have a sr20det blacktop with a t25 turbo in it. Does anyone have a list of turbos that are plug and play for this car?
The setup is for 250 to 400 hp im looking to make a little over 300 for daily driving.
mods:
tuned ecu from Enthalpy
550cc injectors
z32 maf
isis exhaust
the down pipe is stock.
Thanks
bmxer882x
05-26-2015, 03:02 PM
S14 t28 should get you 300.
S15 ball bearing t28 if your feeling frisky
Gt2871r in a .64 housing would do it the best.
/thread
simmode1
05-26-2015, 03:10 PM
I always heard that the S14's & S15's T28s where the same, but that power difference between those SR's power levels were attributed to larger injector sizing & VTC tuning. right or wrong?
bmxer882x
05-26-2015, 03:24 PM
Same size, journal bearing and ball bearing respectively. Both make around the same power. S15 turbo would spool a tad faster.
TheRealSy90
05-26-2015, 03:28 PM
Every turbo will fit on every engine.
amgsmg
05-26-2015, 04:12 PM
Thanks for the quick reply
I'm going to look into the gt2871r
simmode1
05-26-2015, 04:22 PM
Thanks for the quick reply
I'm going to look into the gt2871r
Before you do that, you might wanna read up. The GT2871r has been surpassed by it's replacement, the GTX line of Garrent turbos...http://zilvia.net/f/showthread.php?t=460807
eappluice
05-27-2015, 08:09 AM
Both make around the same power. S15 turbo would spool a tad faster.http://goo.gl/NQIZBB
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.