PDA

View Full Version : Anyone using Mazworx hydraulic release bearing?

JSimpson
05-11-2015, 10:37 PM
Just curious if anyone on here is using a mazworx hydraulic release bearing on a heavy clutch?

I have been dealing with them for 2 months trying to put this kit together and its put a very bad taste in my mouth to say the least. I am a huge fan of Mazworx and have spent every dime I could with them over the past 6 years (Well over $30k).
However, since losing Eric Siu, I believe their service has gone to shit.

Unfortunately I'm forced to post here about anyones experiences with this hydraulic bearing setup and what exactly it took to get it to work.

Thanks guys!
TheRealSy90
05-12-2015, 09:28 AM
Are you talking about a z33 trans internal slave?
JSimpson
05-13-2015, 06:31 PM
Are you talking about a z33 trans internal slave?

No the hydraulic tilton bearing setup mazworx sells for the Z32 and SR style gearboxes
jr_ss
05-14-2015, 05:26 AM
What exactly is the problem?
JSimpson
05-14-2015, 10:26 AM
What exactly is the problem?

The "kit" they sent me for $535 is a hobbled together box of off the shelf universal length stuff that does not seem to work. There is no instruction manual. Ive been nagging at them for 2 months to provide some form of insight or instruction and to this day I have received nothing. I'm just wondering how the guys that do have it working in their cars did it, as well as what else they had to buy and modify to make it work.
jr_ss
05-14-2015, 02:57 PM
The "kit" they sent me for $535 is a hobbled together box of off the shelf universal length stuff that does not seem to work. There is no instruction manual. Ive been nagging at them for 2 months to provide some form of insight or instruction and to this day I have received nothing. I'm just wondering how the guys that do have it working in their cars did it, as well as what else they had to buy and modify to make it work.

http://zilvia.net/f/member.php?u=38120


Contact the member above. He had one on his VET years ago. Perhaps he can shed some light on how to set it up.
JSimpson
05-16-2015, 07:56 PM
http://zilvia.net/f/member.php?u=38120


Contact the member above. He had one on his VET years ago. Perhaps he can shed some light on how to set it up.

Thanks for the info. I contacted him a day ago and will see what he comes up with. In the mean time, BUMP!