PDA

View Full Version : 5 speed swap problem


cvfitzwater
05-05-2015, 09:03 AM
Hey guys once again having trouble! I have swapped my auto to a manual. I bought one manual transmission that came with the car and it was missing a few parts. To solve this I went out and bought another with a manual drive shaft as the auto rive shaft won't fit. Now the problem is the drive shaft mates up to the out put shaft fine of one transmission but it has this cup on the end that allows rubbing and won't allow it to mate up to the diff. I'm thinking I can just cut that cup so it doesn't rub and it will fit. I have pictures of the drive shaft in the tranny I have in that car and then one of it in the tranny it cam with bellow plz help I have to get to work tomorrow as this is my daily! Sadly... first picture is the tranny that I'm using the second is the tranny I used as spare sorry for the long post

8341683417

nemesisdrift
05-06-2015, 01:14 PM
remove the cup. just pulls off. you dont need it

cvfitzwater
05-06-2015, 01:31 PM
I ended up pulling it off and it left part of the shaft exposed I wasn't comfortable with I'm sure it would of been fine but I just cut it to be smaller so it had some coverage