wiring z32 kat w afc2

[bdeisle]

breaking in my motor still but i need to run a bigger maf and jsut need to know how to wire and set up the z32 in the afc2 and i have a jwt ecu just wasnt orignally tuned for z32

[theicecreamdan]

somewhere in the settings there is the "hotwire in" "hotwire out" look in the manual to find which HW-# is the Z32 MAF and that will be the in setting, the out will be the s-14 HW-#

somebody correct me if im wrong but that's how I understood the afc-2 settings...

[orion::S14]

What JWT tune do you have? Stock S14 MAF with 370CC injectors???

What injectors are you planning on using?

What's the planned boost and HP?

- Brian

[speedyttz]

if your ECU is not tuned for the Z32 maf. Your car is not going to preform right. Running that MAF the ECU has to understand the different volt readings coming off that particular MAF. When your tuning and running different electrical components especially MAFs the main computer has to be updated so it can utilize the information.

[orion::S14]

if your ECU is not tuned for the Z32 maf. Your car is not going to preform right...

That's the point of the AFC in this case.

You program it to use a Z32 MAF on the S14 (like 2 in, 6 out, or something...???) and it translates the voltage curve.

You can also tune the fuel...AFC is a decent piggyback.

- Brian