So, tons of people have asked for it... we'll be done, soon. ;) Chime in!!!

[Mazworx]

Well, you asked for it. We got started!

Check out the first sneak peak into the Mazworx VQ Trans to SR conversion kit!
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpt1/v/t1.0-9/11146557_1027308600617328_230739695435004213_n.jpg ?oh=62ae1f645b8a17032f3ae7928f79741c&oe=55CB386F&__gda__=1439323243_4ce203f535aa2001170f02d35825101 a

No Adapter or creative modifications. A properly cast bell housing, made right here in the USA! Be sure to follow our Facebook and Instagram channels for even more updates!

[ultimateirving]

Very cool and interesting. Make this swap a piece of cake

[turbo2nr]

:( no ka luv??

[Mazworx]

as of right now, it's for the SR. Once we have this one done and kicking ass, we can do the KA. Mark said he's all for doing it.

[gearhead290]

What about a shifter provision that puts the shifter in the correct place?

[RalliartRsX]

Hmmmmmm

What would the package price be for this to bolt up a VQ tranny?? Also, any idea on speed sensor provision or wire up solution??

[Mister.E]

I wish someone could do this for a CD009 to 1JZ/2JZ setup.

[dorkidori_s13]

What about a shifter provision that puts the shifter in the correct place?

this!!! ^^^^

will the bellhousing adapter actually keep the shifter in OEM position? not all of us want racecar interior, id love the option of upgrading to a VQ tranny while keeping my stock interior stock.

[frmdabak187]

what he said ^^ Patiently waiting reply

[Rb26kouki]

I'm sure it is

[Busta]

Well this is just fabulous! Having a product like this finally on the market will provide for a sturdy structure/attachment direct fit solutionto swap in this transmission. I presently run z33 tranny on sr with welded bellhousing its a match made in heaven. Should definetly have a mazworx cnc shifter bracket developed in line with this.

[Busta]

stock interior is indeed possible i have all the interior stuff. Shifter is 1.5 inches aft from boot center still looks oem

[laurel4]

Please please make one to adapt vq trans to rb. Already adapters around (albeit not of this quality) for SR's, KA's and even JZ motors and yet nothing for the RB.

[Rb26kouki]

Well this is just fabulous! Having a product like this finally on the market will provide for a sturdy structure/attachment direct fit solutionto swap in this transmission. I presently run z33 tranny on sr with welded bellhousing its a match made in heaven. Should definetly have a mazworx cnc shifter bracket developed in line with this.
They do have one

http://www.mazworx.com/store/p/188-Mazworx-Z33-Shifter-Bracket.aspx

[STEEZxIT]

very cool! i'm interested in this.

do you have a ballpark estimate of when this will be released and pricing?

[Smurf_240SX]

Nice! this would be a great upgrade awesome!

[Mazworx]

We're working to get it to the market, soon. We have a lot of work in the shop and tons of products to work on. Don't worry, it won't be too much longer. =)

[NismoPlsr]

Please please make one to adapt vq trans to rb. Already adapters around (albeit not of this quality) for SR's, KA's and even JZ motors and yet nothing for the RB.

Collins makes an adapter plate for RBs. JWT makes an adapter plate to use an auto RB bell housing on the z33 trans.

Either way, a cast bell housing like this would be the better and probably optimal solution anyways.

...So, I agree, RB needs to be put on the todo list for Mazworx.

[Rb26kouki]

Collins makes an adapter plate for RBs. JWT makes an adapter plate to use an auto RB bell housing on the z33 trans.

Either way, a cast bell housing like this would be the better and probably optimal solution anyways.

...So, I agree, RB needs to be put on the todo list for Mazworx.
I'm sure they will make one for the RB as well like they previously said regarding the KA. Once the SR Housing Is done and kicking ass.

[xilovelsdx]

Fuck yes!!!!!!!!

[Yellow4g63]

I hope it comes out before I do my VET swap.

[lg54]

what would be the advantage of the VQ trans vs the VG?

[Yellow4g63]

what would be the advantage of the VQ trans vs the VG?

Google it.

[hunterw92]

what would be the advantage of the vq trans vs the vg?

an extra gear m8

[driftage240]

Take my money now!!


If the shifter is in the "stock sr trans position"

Any idea on projected price? Maybe group buy killer price?

[Smooth]

patiently waiting on the RB-VG as well...

[brndck]

very cool product/idea. so nice to see companies still making new stuff

[RTB.1054]

I can't wait was just about to order the maverick setup for Z33 HR trans speaking of that, you guys making it for DE and HR trans right!!! Please say yes

[Sforteen]

I'd buy an RB VG setup

[NismoPlsr]

Take my money now!!


If the shifter is in the "stock sr trans position"

Any idea on projected price? Maybe group buy killer price?

I'm pretty sure you can't get to stock shifter position with just a bell housing, the input shaft is what determines the location of transmission relative to the engine (chassis).


Why are the rest of you talking about RB-VG adapters? The idea is to upgrade here.

[Mazworx]

we'll have updates next week, friendos! =)

[wolfpack]

Nice! Can't wait to see what you guys have come up with!

[Ramonesfreak2010]

Its a week. Whats up with this thang.

[Mazworx]

I'll post an update tomorrow. =)

[e30gangsta]

I wish someone could do this for a CD009 to 1JZ/2JZ setup.

Agreed way better than busting a mission with the adapter kit. Id buy one.

[TheRealSy90]

I'll post an update tomorrow. =)

SOO eager for this thing to come out! I have everything to swap my z33 trans, but I just couldn't get over using an adapter plate. Would much prefer a correct bell housing swap.

Important question though, will this bellhousing work with the z33 HR transmissions?
I've got an '08 HR trans with 10k miles on it and had to modify my Maverick adapter plate to bolt to it, but since your product would replace the whole bellhousing, I can't see it not working?
Unless something like the main shaft bearing is different, but I have no idea.
If this could bolt up to the HR trans which would get rid of the CRAP concentric slave cylinder, I'd place my payment right now if I could.

[Dboyizmlg]

Today is tomorrow! Lol
Need update please :)

[TheRealSy90]

Really hoping we get that update today :D

- or not...

[TheRealSy90]

Bump for an update.

[Rb26kouki]

Were all a little anxious about this

[TheRealSy90]

Yeah, I just wish I could buy it already...

[Ramonesfreak2010]

In 4 special pricing.

[RTB.1054]

What happened with update??? What a cock tease!!!!

[Dboyizmlg]

Hey Mazworx,
Seems like a lot of people with interest here, as well as my self.

Please give us some updates.
Thanks

[Mazworx]

we've been working on a lot but I'm hoping to have a real update with ETA and pricing for you guys, VERY soon.

[TheRealSy90]

Okaaaaaaay. Better than nothing >.<

[roadbuster]

Will this be compatible with SR clutch & flywheel combos?

Will the input shaft cover have clearance for twin or triple plate clutches that consume more length of the input shaft? For example, OS Giken recommends shaving some length of the stock S13/S14 5-speed input shaft cover due to the longer length of the multiplate plate clutch and different throw out bearing. TIA

[TheRealSy90]

I would assume that it's going to work with the normal sr20 clutch/flywheel since they have the same splines as z33 clutch. And it should work with a twin disc but idk about anything more than that?

[LikWid]

Subscribed. Need update naooooooooo

[Mazworx]

Will this be compatible with SR clutch & flywheel combos?

Will the input shaft cover have clearance for twin or triple plate clutches that consume more length of the input shaft? For example, OS Giken recommends shaving some length of the stock S13/S14 5-speed input shaft cover due to the longer length of the multiplate plate clutch and different throw out bearing. TIA

It will clear the twin plate. The triple may need to be checked.

[RTB.1054]

Can we use the newer HR trans? And when's this going to be ready

[TheRealSy90]

If it can be used to convert an HR trans to the external slave and clutch fork it would be perfect.

[RTB.1054]

I like the internal slave cylinder setup. The old setup is out dated, to many moving parts. Don't get me wrong it works but new setup is an improvement in my opinion.

[240sxfan6882]

Updates? :hsdance:

I know this is being designed for the SR, but here's hoping for a KA version! :)

[Ramonesfreak2010]

The suspense is killing me!

[RTB.1054]

This is bulls#!%? I hate when people get you all excited about a product and
don't come trough. I got money burning a hole in my pocket

[roadbuster]

Will this bellhousing be SFI certified or will you make a new scattershield for it?

[TheRealSy90]

I really hope this didn't get put on a back burner and forgotten about. Also the internal slave doesn't hold up and will burst all the time.

[roadbuster]

new month, any updates?

[Rb26kouki]

Let's be patient.

Just look at the billet blocks they have I'm sure this bell housing is a big project. This post was just a teaser.

add me on the pre order list.





Sent from my XT1060 using Tapatalk

[RTB.1054]

Patient??? I think we've been pretty good this post started back in April it's now July. would be nice to have this installed to enjoy this summer

[Kylepaschke]

It would be nice to have this product at all- You can't rush perfection and this company is one of the few companies actually manufacturing parts. Give them time. If you really do in fact want it that badly- you can wait :D I'm really excited because this looks amazing and is functional. +1 mazworx take your time!

[TheRealSy90]

Bumping this thread, I really hope this doesn't die off. Basically haven't touched my car in months because I want to do this conversion without an adapter plate.

[RTB.1054]

Bumping this thread, I really hope this doesn't die off. Basically haven't touched my car in months because I want to do this conversion without an adapter plate.

I'm in the same boat you are lol wish they had an update.

[Ramonesfreak2010]

In other news, GK Tech is releasing a shifter that sits perfectly in the tunnel. No trimming necessary.

[TheRealSy90]

So any updates with this Mazworx?


In other news, GK Tech is releasing a shifter that sits perfectly in the tunnel. No trimming necessary.

Yeah i've been waiting for updates with that too. Basically I want the mazworx bellhousing and the gktech shifter. So my car sits with no transmission in it... Only thing is it does not have the reverse gear lockout like the normal z33 shifter, but hopefully that's not a problem when shifting from fifth to sixth.

[Kylepaschke]

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/11053631_1109546369060217_7112462064925058422_n.jp g?oh=6d628810ba3ee73e121be7b4061a1b49&oe=566E465C


NO Pricing
NO release date
THIS IS A TEST RUN!!!!

[TheRealSy90]

The wait is real. This is like torture. I wonder if they're having a physical problem producing this or something?


Sent from my iPhone using Tapatalk

[Rb26kouki]

Can we have a estimate release date? Might have to go a different route meanwhile if its too long. My car is down due to this conversion.

[TheRealSy90]

They're planning to debut it at the PRI / Performance Racing Industry car show this December. As far as production, who knows :/


Sent from my iPhone using Tapatalk

[Mazworx]

We're getting closer!!!!!!

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12109773_1120536537961200_2334227939238611036_o.jp g

The housing is fitted and we are working to finish up the other parts that will be needed.

We do not have an ETA or price point setup as of yet. But, we're getting closer!

[Kylepaschke]

http://www.mazworx.com/mazworx-sr-vq-adapter-kit-for-s-chassis.aspx


PRE ORDER!!!!
Uses SR20DET Clutch Components

LOOKS AMAZING!

[TheRealSy90]

Ordered mine today a couple minutes after they posted up the preorder. So stoked for this. Finally a kit that has literally everything, don't have to source anything else. Comes with gaskets, shifter, shifter bracket, trans mount crossmember, and driveshaft! And yeah uses the sr clutch slave and fork.


Sent from my iPhone using Tapatalk

[RTB.1054]

I'm assuming that it won't matter if we use VQHR trans or VQDE trans HR has innternal slave cylinder and DE has external slave cylinder. I wonder if you swap over fork and throw out bearing from SR trans bell housing.

[TheRealSy90]

Internal or external slave doesn't matter, it just has to be a CD009 from what I was told. So that should mean the revup JK40C as well from the HR or 370's.


Sent from my iPhone using Tapatalk

[RTB.1054]

Hope that the JK41B works from a 08 350Z

[TheRealSy90]

Hmm didn't know they made anything past the JK40's, should be exactly the same.

[RTB.1054]

Yeah out of a Nismo edition 350Z but don't think it's any different

[TheRealSy90]

Well my Mazworx kit shipped out a couple days ago. Looks awesome. Depending on how their shifter bracket looks in the car, I might sell it and go with a different companies shifter.
http://uploads.tapatalk-cdn.com/20160306/6f8cbe841dc9d816b11c9e095709add9.jpg
http://uploads.tapatalk-cdn.com/20160306/ef9eec09ff8763a7a60326fcf94f24f0.jpg
http://uploads.tapatalk-cdn.com/20160306/8f35d52dde3af4a984a468868cc558cb.jpg


Sent from my iPhone using Tapatalk

[Yellow4g63]

Dang I want to see how it lines up in the car, I'm on the fence at this point about it.

[TheRealSy90]

Dang I want to see how it lines up in the car, I'm on the fence at this point about it.


You mean like the shifter itself? It's designed to fit in the stock position.


Sent from my iPhone using Tapatalk

[TheRealSy90]

Bump anybody else going Mazworx kit?


Sent from my iPhone using Tapatalk

[TheRealSy90]

I got my kit in yesterday. Bellhousing looks awesome. Already looking at a different option for the shifter. Come to find out you DO have to cut the shifter hole. It comes with either a B&M or CircuitSports Z33 short shifter, can't tell which it is. I was surprised and disappointed at this, and that they did not design a bespoke shifter for their kit. I'm looking at InsaneDrifters shifter kit now. Fits in stock position.
http://uploads.tapatalk-cdn.com/20160311/0aa3b167524832d83c089fe8713944ad.jpg


Sent from my iPhone using Tapatalk

[Dboyizmlg]

^^ that looks real nice!