supersayianjim
02-22-2015, 03:11 PM
RB25DET Series 3.... most of you will never see one. These are in a handful of R33's late 97 and later, some Stagea and Laurels. As productions ran out and neo parts were being produced this series r33 incorporated some others parts.Uses a R34 style cam key, but it's not a neo, it is hydraulic lifter, uses R34 style timing covers, still uses side feeds, has front head drain, etc. Its basically a series 2 with a different cam key, and front covers. When ordering tomei Poncams it you have choice of type 1 and type 2... Type 2 is for series 3 only. If you order these for you S2 you need a new CAS and to repin the cas harness.
R33 RB25DET cams are Camshaft duration 240°in, 240°ex lift: 7.8mm in, 7.8mm ex
as the description states iam selling my current daily driver setup(yes I drive it now). and I will be more than glad to show someone who is seriously buying/interested in the car with a test ride/drive.
you can see all you need to know about this car on my work log.
--STARTS ON ENTRY 243--
http://www.240sxforums.com/forums/rb-tech/118679-project-s-rb-10.html
-- Long block engine price $1,400.00 why do you want to pay this much for just an engine??
-arp head studs/ oem head gasket
-3 angle valve job/new valve seals
-replaced oem water pump
-thicker block than an avg s1/s2
-it's driving around now so it's reliable, no oxidation or GUESSING if it's a lemon
-has good compression/oil pressure(can test on appointment)
-only synthetic oil used
-dynoed [email protected] @ 12psi(a 5min tune)
--WHAT IS INCLUDED--
-front mount used intercooler(3" in out")
-timing covers/camshaft covers/oem dampner
-exhaust-turbo manifold(oem)
-rb25det maf/pigtail(pink label)
that is all that is included, all the other items iam keeping, this motor is pretty much for someone who has a rb25 and needs a longblock spare. I have items(not everything) that goes with the motor I will be selling for extra. stuff includes
-rb20det transmission(see other posting) comes with oem f-wheel and f1racing 3 puck(used) $290.00
-rb20det-rb25(top feed conv for the 25) deatschwerks 650cc injectors $340.00-shipped (these are 430 new)comes with the oem 20 rail that can work with 25 injectors.
http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb20det/1989-94-rb20det/18u-02-0650-6-detail
-nismo fpr $80.00(obo)
-rb25 oil pan(alum) needs to be cut/modified to run rwd $250.00(you can modify a regular metal pan to work with the bigger 26'ish blocks or u can just buy this one off me.
-black rb25/26 cas(plastic) tested and works of course $180.00
-rb20/25 low mileage alternator $100.00
-z32 5speed ecu(can use nistune with this to go mad-fast) $100.00
-lower engine/alt/tranny harness(2 plugs cut) $50.00
again this is mostly intended for someone who already has the setup or someone who is in for a long haul build. what u will need to make this engine to go mad fast in your current/future car is these parts provided you got the other stuff from me
--YOU WILL NEED--
-engine harness
-intake manifold
-starter
-turbosetup
-coilpacks
-driveshaft
-power steering pump/lines
might be missing something else but that is the jisp of it. I will be pulling this engine the 1st-2nd week of march. so iam listing it now as I need this to sale fast. email me with questions and I will get back to you
R33 RB25DET cams are Camshaft duration 240°in, 240°ex lift: 7.8mm in, 7.8mm ex
as the description states iam selling my current daily driver setup(yes I drive it now). and I will be more than glad to show someone who is seriously buying/interested in the car with a test ride/drive.
you can see all you need to know about this car on my work log.
--STARTS ON ENTRY 243--
http://www.240sxforums.com/forums/rb-tech/118679-project-s-rb-10.html
-- Long block engine price $1,400.00 why do you want to pay this much for just an engine??
-arp head studs/ oem head gasket
-3 angle valve job/new valve seals
-replaced oem water pump
-thicker block than an avg s1/s2
-it's driving around now so it's reliable, no oxidation or GUESSING if it's a lemon
-has good compression/oil pressure(can test on appointment)
-only synthetic oil used
-dynoed [email protected] @ 12psi(a 5min tune)
--WHAT IS INCLUDED--
-front mount used intercooler(3" in out")
-timing covers/camshaft covers/oem dampner
-exhaust-turbo manifold(oem)
-rb25det maf/pigtail(pink label)
that is all that is included, all the other items iam keeping, this motor is pretty much for someone who has a rb25 and needs a longblock spare. I have items(not everything) that goes with the motor I will be selling for extra. stuff includes
-rb20det transmission(see other posting) comes with oem f-wheel and f1racing 3 puck(used) $290.00
-rb20det-rb25(top feed conv for the 25) deatschwerks 650cc injectors $340.00-shipped (these are 430 new)comes with the oem 20 rail that can work with 25 injectors.
http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb20det/1989-94-rb20det/18u-02-0650-6-detail
-nismo fpr $80.00(obo)
-rb25 oil pan(alum) needs to be cut/modified to run rwd $250.00(you can modify a regular metal pan to work with the bigger 26'ish blocks or u can just buy this one off me.
-black rb25/26 cas(plastic) tested and works of course $180.00
-rb20/25 low mileage alternator $100.00
-z32 5speed ecu(can use nistune with this to go mad-fast) $100.00
-lower engine/alt/tranny harness(2 plugs cut) $50.00
again this is mostly intended for someone who already has the setup or someone who is in for a long haul build. what u will need to make this engine to go mad fast in your current/future car is these parts provided you got the other stuff from me
--YOU WILL NEED--
-engine harness
-intake manifold
-starter
-turbosetup
-coilpacks
-driveshaft
-power steering pump/lines
might be missing something else but that is the jisp of it. I will be pulling this engine the 1st-2nd week of march. so iam listing it now as I need this to sale fast. email me with questions and I will get back to you