The S14 part out you've been waiting for... tons of parts!

[beems240sx]

It's finally time to let this car go. I built it up from a bare shell to where it is now. Im moving on to finding myself the perfect FD so everything on this car must go. My car must remain a roller until May, unless of course the shell sells before then or if you bring me stock parts. i might be able to get it full stripped much sooner and i will update this thread when that happens. ALL PRICES DO NOT INCLUDE SHIPPING.

http://i90.photobucket.com/albums/k269/beems240sx/Mobile%20Uploads/image_zps7c84c914.jpg (http://s90.photobucket.com/user/beems240sx/media/Mobile%20Uploads/image_zps7c84c914.jpg.html)

Shell
-Clean Illinois Title in hand
-Fully undercoated with POR15 and 3M rubberized spray
-Tubbed front wheel wells and stitched seams
-All bay holes welded up and grinded down
-trunk cut out and 15 gallon RCI fuelcell mounts welded in
-Engine bay painted sparkle purple
-Exterior painted nissan AR2
-Brand new windshield
-Rear quarter panels cut and welded for widebody
-Interior is stripped, still has dash and door panels
-Refinished subframes with POR15
-Stance solid subframe risers
-Energy suspension rack bushings
-Will come with hood, trunk, doors, taillights
SOLD (This is for a nonrolling shell, add parts below to make it rolling or bring your own.)

Suspension
-Stance GR+ coilovers SOLD
-ISIS/Megan adj. arms with SPL ecc. lockout bolts (POR) $350
-OEM rear lower control arms reinforced plates new moog ball joints (POR) $200
-Moog inner tierods TF outers $100
-Brand new OEM 5 lug hubs SOLD
-Front knuckles SOLD
-OEM rear knuckles w/ energy suspension bushings $100

Brakes
-300zx 26mm front calipers w/ hawk hps pads, new hardware SOLD
-300zx 26mm front rotors used SOLD
-300zx 30mm front rotors brand new $100
-300zx rear calipers and rotors SOLD
-300zx rear ebrake backing plates, shoes, hardware (missing one spring) $150
-DIF stainless steel front lines SOLD
-ASD 16" Hydro w/bolt in mount by shifter PC sparkle purple with custom made brake lines, banjo off master. rear runs to hydro through firewall then mounts to T above rear subframe to rear calipers SOLD
-300zx master cylinder SOLD
-brake booster SOLD
-clutch master SOLD

Interior
-Sparco Corsa seat minimal fart stains SOLD
-Bride seat mount w/sliders SOLD
-NRG blue harness bar SOLD
-TeamTech 6 point harness Purple w/ white stitching SOLD
-NRG 4 point $can of monster and we burn it together
-NRG purple quick release (gen2 or 3?) SOLD
-Purple bubble shift knobs SOLD
-Moroso switch panel SOLD
-Autometer Phantom2 Boost, Water, Fuel $150
-Fardi steering wheel, pretty beat SOLD
-Innovate lc1 SOLD
-stock shifter SOLD
-Dash SOLD

Electrical
-AEM EMS V2 w/ water, boost, MAP, IAT sensors. CAS w/trigger disk, wiring specialties AEM harness, ID injector pigtails. currently tuned for my setup by Tony at UMS. SOLD

Exterior
-Origin stylish kit, sideskirts and rear bumper sold. Front still available for $200
-Origin front fenders SOLD
-Origin type2 50mm rear SOLD
-Circuit sports clear headlights SOLD
-Origin clear corners SOLD
-Kouki Wing SOLD


Engine
-PBM highmount intercooler w/tial flange SOLD
-HKS cam gears SOLD
-Garrett GT2871R .86 SOLD
-Tial BOV blue SOLD
-ISIS pulleys WP and PS, PC sparkle purple $80
-HKS divided o2 housing SOLD
-Circuit Sports downpipe w/flex $80
-Circuit Sports test pipe SOLD
-Thermostat housing and water neck PC sparkle purple $80
-Stance water neck adapter $35
-ISIS intake manifold PC sparkle purple w/iacv + tbody SOLD
-Throttle cable bracket PC sparkle blue $30
-Mishimoto Radiator w/fans SOLD
-Samco rad hoses SOLD
-ISIS oil cooler SOLD
-Solid motor mounts $40
-OBX crank pulley SOLD
-ISIS catback SOLD
-powersteering resovior $20
-Earls stainless turbo lines SOLD
-stage8 locking SOLD

Fuel
-RCI 10 gallon fuel cell SOLD
-Fuelab dual inline filters -8an anodized purple SOLD
-Parker nylon feed and return line -8an SOLD
-Injector Dynamic ID1000's SOLD
-Circuit Sports top feed rail SOLD
-Fuelab FPR anodized purple w/guage and -8an fittings SOLD
-Bosch044 -8an fittings SOLD

Driveline
-Suburban driveline 1 piece steel driveshaft SOLD
-Welded diff POR coated SOLD
-DIF solid diff bushings SOLD
-Axles $30each
-Tennessee clutch supply 6 puck $150

Wheels
-Dai Yoshihara Champions 18x10 +15 SOLD


i will post general pictures of the car, if you want something specific please ask and i will get it to you asap. please view my build thread for more pictures also.

if it is not listed, it is not currently forsale

http://i129.photobucket.com/albums/p204/beemsmx6/Mobile%20Uploads/image_zps4b13871b.jpg (http://s129.photobucket.com/user/beemsmx6/media/Mobile%20Uploads/image_zps4b13871b.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zpsd4b457e4.jpg (http://s129.photobucket.com/user/beemsmx6/media/image-1_zpsd4b457e4.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zpsffd40f43.jpg (http://s129.photobucket.com/user/beemsmx6/media/image-1_zpsffd40f43.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zps557f3bf4.jpg (http://s129.photobucket.com/user/beemsmx6/media/image-1_zps557f3bf4.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zps1685e4d2.jpg (http://s129.photobucket.com/user/beemsmx6/media/image-1_zps1685e4d2.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zps78b0b0b3.jpg (http://s129.photobucket.com/user/beemsmx6/media/image-1_zps78b0b0b3.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zps58f4d345.jpg (http://s129.photobucket.com/user/beemsmx6/media/image-1_zps58f4d345.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/photo3_zps90a6e2ae.jpg (http://s129.photobucket.com/user/beemsmx6/media/photo3_zps90a6e2ae.jpg.html)

http://i90.photobucket.com/albums/k269/beems240sx/Mobile%20Uploads/image_zpsmetmpppp.jpg (http://s90.photobucket.com/user/beems240sx/media/Mobile%20Uploads/image_zpsmetmpppp.jpg.html)

http://i90.photobucket.com/albums/k269/beems240sx/Mobile%20Uploads/image_zpsshgilhx2.jpg (http://s90.photobucket.com/user/beems240sx/media/Mobile%20Uploads/image_zpsshgilhx2.jpg.html)

http://i90.photobucket.com/albums/k269/beems240sx/Mobile%20Uploads/image_zpspba6nskv.jpg (http://s90.photobucket.com/user/beems240sx/media/Mobile%20Uploads/image_zpspba6nskv.jpg.html)

[kerrykerrykerry]

Peak trans mount come with all four bolts? Also, street or track version? Thanks

[beems240sx]

sure ill include the hardware. i dont know what version, i assume track

[iHateMySilvia]

Any broken fans or damage on headlights?

[beems240sx]

broken fans? headlights are pending right now just awaiting payment

[Dauzat's 40]

Sent you a pm.

[da_crew10]

That is an awesome deal on the shell. Pm me a price shipped on the FPR & wideband.

[Twosteptj]

Pm a price for both the coilovers and the ebrake. With pictures as well. I can ship my struts and springs to you to keep it a roller

[beems240sx]

You'll need to pm me your zipcode please.

[beems240sx]

I'm getting bombarded with messages so please be patient and bear with me while I get quotes. I also work 50 hour weeks so I'll be as quick as I can be. I should hopefully be able to move the car and get it on jack stands this weekend or next. Thank you for choosing beems240sx your one stop thread for rad s14

[iHateMySilvia]

Oops ment tabs lol not fans , let me know if the headlights don't sell

[Mcpot132]

I'll take the master cylinder shipped to 60614

[sw20>>s14]

Damn shame to part out something so clean. Bump for you!

[JSimpson]

^^^ NO KIDDING! This thing is beautiful, such a shame it doesn't get to stay in this glory. Interested in the bride rail and z32 BMC. Ready to send payment

[KOUKIboy]

Oh no, say it ain't so!!! This Zenki was sooo Rad!!! interested in the Kouki wing and I'm local....

[beems240sx]

I'm working out a deal on the rail and seat combo currently. I'd prefer to sell it that way.

I just opened a FedEx account so I am working on all shipping quotes currently

[S14kouki805]

Are you selling any interior tidbits? I need a drivers side power window regulator and switch...

[JSimpson]

these are damn good prices

[beems240sx]

ALL parts that are sold are updated.

i believe i got everyone a shipping quote and already sent out a few parts! lets keep this going! snag what you want before tax season and someone else does!

[Skullrx3]

I rear calipers 28303

[Drift_86]

Is that oem kouki wing

[KAs14slider]

I'm just waiting on a shipping quote for the front calipers. I want them. I sent you a pm.

[FaLKoN240]

Peak trans mount come with all four bolts? Also, street or track version? Thanks

sure ill include the hardware. i dont know what version, i assume track

That tranny mount is the "Pro"/track version. You can see it's black in the pic.

http://i129.photobucket.com/albums/p204/beemsmx6/image-1_zps78b0b0b3.jpg

http://www.frsport.com/Peak-Performance-TRANNYMOUNT-PRO-Pro-Tranny-Mount--Transmission--S13-S14-S15_p_1249.html

[beems240sx]

I possibly have a buyer for the rolling shell. I will keep everyone updated. Thank you.

[94NissanSilviaS14]

Is the rad still available ?


Sent from my iPad using Tapatalk

[94NissanSilviaS14]

Pm me ur mail box is full interested in intercooler too


Sent from my iPad using Tapatalk

[S14_ZX10R]

are all these still available and how much power u make on those 1000cc injectors Fuelab dual inline filters -8an anodized purple $180
-Parker nylon feed and return line -8an $80
-Injector Dynamic ID1000's $380
-Circuit Sports top feed rail $120
-Fuelab FPR anodized purple w/guage and -8an fittings $160
-Bosch044 -8an fittings $180

[beems240sx]

Is the rad still available ?


Sent from my iPad using Tapatalk

Yes it is

Pm me ur mail box is full interested in intercooler too


Sent from my iPad using Tapatalk

Intercooler is pending to a friend currently. I'll message you if it's available next week

are all these still available and how much power u make on those 1000cc injectors Fuelab dual inline filters -8an anodized purple $180
-Parker nylon feed and return line -8an $80
-Injector Dynamic ID1000's $380
-Circuit Sports top feed rail $120
-Fuelab FPR anodized purple w/guage and -8an fittings $160
-Bosch044 -8an fittings $180

All available still. I made 470rwhp on 91 octane 19psi. This fuel system should handle nearly anything. Could run another bosch044 if needed

[94NissanSilviaS14]

I'll take the rad for sure then ! No leaks and still in good shape ??


Sent from my iPad using Tapatalk

[KAs14slider]

Hey do you still have the calipers or are you leaving them on the car when you sell the chassis? If you still got the front calipers, I want them. I just wanted to get a shipping quote to zip 16803.

[ni55an240sx]

Interested in rear over fenders text me 6023499367

[beems240sx]

Hey do you still have the calipers or are you leaving them on the car when you sell the chassis? If you still got the front calipers, I want them. I just wanted to get a shipping quote to zip 16803.

They are still forsale but as stated multiple times I still need to have the car in semidriveable condition to get it over to my new house which should be on Wednesday.

[94NissanSilviaS14]

204-232-8664 for rad

[KAs14slider]

They are still forsale but as stated multiple times I still need to have the car in semidriveable condition to get it over to my new house which should be on Wednesday.

Oh, sorry man, I read through it but I guess I missed that part.

[beems240sx]

Car is being moved today and ready for every part to come off. i cleared my inbox for messages. please send me a PM if i did not get to you. i will not quote shipping until the item is off the car, in a box and weighed. ive gotten screwed on the last few pieces ive shipped.

[beems240sx]

More parts added to the list as well as more pictures! started pulling off parts. let me know what you need! if i havnt gotten back to you with a quote please message me again. ive maxed out my inbox a few times already

[Reddrum13]

Interested in then 300zx BMC. Can you text me shipped price to 30097 please? Thanks man, GLWS.

[seagrasser]

interested in adjustable arms, pm me with more details

[Stealthyfish]

pm on the trans mount

[beems240sx]

Updated list with parts sold and a few more things added! Diff, coils, rear calipers all pending but cash is king!

[beems240sx]

Bump to the top

[beems240sx]

More parts sold and shipped out!

[Camsauce]

flcas??? pm sent

[beems240sx]

Didn't get a pm try again

[zenki 95]

Bov tial q shipped to 78002
Cash in hand . and if you can cut the flange by chance

[beems240sx]

I'll get you a quote but I will not cut the PBM cold pipe...

[zenki 95]

Tial bov sold

[XgoldzenkiX]

rear overs shipped to 95991 please and thank you

[beems240sx]

rear overs shipped to 95991 please and thank you

I'm not currently shipping large items anymore. It was too much of a pain in the ass and very expensive

[beems240sx]

Updated list yet again! I should be adding more parts to it within a week

[ka-tbuildup]

Do you still have the coilovers? And would you ship them

[beems240sx]

Yes, anything that isn't listed forsale is not sold. Yes I will ship them

[ka-tbuildup]

Could you pm me a price shipped to 04073, thanks

[M3ST]

How many miles on the coilovers? PM me a price shipped to 74012.

[beems240sx]

PMs sent!!!!!

[RalliartRsX]

I sent you a OM about the intake manifold. Did you get it?? Very interested!

Thanks!

[kouktexas]

How much for the trans mount shipped to 79938

[beems240sx]

Updated 1st post. All pm replied too

[Jersthecool]

Stance waterneck adapter $35 shipped to Alberta?

[kouktexas]

Updated 1st post. All pm replied too
Hey is the trans mount for sale or not I can pay pal money asap just send back your pay pal info

[beems240sx]

Hey is the trans mount for sale or not I can pay pal money asap just send back your pay pal info

I didn't reaponse because as I've stated 5 times motor and trans are still in the car, I'll let you know when I pull it

Stance waterneck adapter $35 shipped to Alberta?

No thanks. If you want a shipped price send me your zipcode

[Mister.E]

Do you still have the BMC? If so, is it a 17/16" Z32?

[S14_ZX10R]

Yes it is







Intercooler is pending to a friend currently. I'll message you if it's available next week







All available still. I made 470rwhp on 91 octane 19psi. This fuel system should handle nearly anything. Could run another bosch044 if needed


If you can pleas pm a Package deal for everything I listed my sr made 420 on 91 octane going e85


Sent from my iPhone using Tapatalk

[beems240sx]

Pm sent bud

[kouktexas]

I need the trans mount shipped to 79938 please pm me

[beems240sx]

Updated first post with more items sold

[Albert_Trd]

Totally found this on CL in phx. Was trying to get my brother to pick some stuff up

[beems240sx]

Forsure dude! And you're local so I won't have the headache of shipping. Let me know what you guys need!

[beems240sx]

Bump more parts packed up and shipped out!

[Legend1515]

Driver window switch?

[beems240sx]

Driver window switch?



Sorry those went with the door panels

[beems240sx]

Bump still have lots of parts!

[rwake15]

Hey I pmed u

[K crazy]

Hey I Pm'd you.

[beems240sx]

Bump more parts shipped off!

[zenki 95]

What about trans flex plate, alternator mounting hardware and tensioner, Valve cover hardware.

[xARxxImPoRtx]

Able to ship transmission? If so price shipped to 13601.

[91EfSi]

Still have intake manifold still available? If so price shipped 67401?

[beems240sx]

Able to ship transmission? If so price shipped to 13601.

Sorry I'm not shipping large items.

Still have intake manifold still available? If so price shipped 67401?

Sent you a pm

[zenki 95]

What about trans flex plate, alternator mounting hardware and tensioner, Valve cover hardware.
Bumpppppppp

[beems240sx]

Bumpppppppp


I'm not interested in selling random hardware right now.

[beems240sx]

Bump more parts sold and shipped out!

[beems240sx]

Updated first post with sold parts

[beems240sx]

Bump more parts shipped out!

[beems240sx]

Once again more parts shipped and a couple added

[PhilS14_97]

Is the 5spd Trans still available? Along with any other Trans accessories?

zip 48073

[S30ZG]

Interested in the CS downpipe. Can you pm me some pics if you get a chance?

[beems240sx]

Interested in the CS downpipe. Can you pm me some pics if you get a chance?

Sent you a PM

I AM NOT SHIPPED LARGE ITEMS AS STATED MULTIPLE TIMES. IE NOT SHIPPING TRANS

[bmfonda]

Do you have the driver side window switch?

[bmfonda]

do you have the driver side power window switch?

[bmfonda]

do you have the driver side power window switch? and what year is the car?

[s14Kidd96]

Would u have the clutch pedal for sale ?

[Behemoth]

Driver's seat bracket?

[Rizos14zenki]

Driver power window switch?

[the-rusty-240]

What is left on the shell?

[beems240sx]

What is left on the shell?

Everything that is listed in the first post.

[beems240sx]

Bumping it up! Still have some good parts left over!

[Skullrx3]

Do u still have all the adjustable arms and such? I have a set from the previous owns messed up install. Bearings and such are screwed.

[mike240s]

would you be interested in selling the back window

[Mmmtaco]

Are the solid motor mounts still available?

[beems240sx]

Do u still have all the adjustable arms and such? I have a set from the previous owns messed up install. Bearings and such are screwed.

Yes I still have all of them.

Are the solid motor mounts still available?

They are however the motor is still in the car so I can't sell them just yet. I don't know when I will have time to pull it. Hopefully in the next couple of weeks

[Skullrx3]

[QUOTE=beems240sx;5867935]Yes I still have all of them.

What all is there? pics?

[beems240sx]

Bump it up!!

[beems240sx]

Bump shell sold! Let's get these parts gone!

[beems240sx]

Bump it up still have parts!

[CaTalyst.X]

Is that throttle cable bracket specific to the ISIS intake?

[beems240sx]

Yes it is, that's what I made it for

[beems240sx]

Bump it up. Still have a few things. First post updated

[Davidgfeller]

Do u still have the shell ?

[anthony_240]

Looking for a driver window switch if available


Sent from my iPhone using Tapatalk