PDA

View Full Version : CA 240SX Part Out - Everything in my car is up for sale even if its not listed!


Mr. Samurai
12-27-2014, 11:56 PM
deleted old thread

andisan
12-28-2014, 12:42 AM
I'm assuming s14

Mr. Samurai
12-28-2014, 01:01 AM
Yea, its all from a 1997 240sx SE

FaLKoN240
12-28-2014, 06:32 PM
All this stuff gives me a raging hard on!!!

carbon24
12-28-2014, 06:41 PM
Got stock s14 seats?where are you located? Price?

Mr. Samurai
12-28-2014, 06:55 PM
stock front and rear seats were sold like YEARS ago ... I sold those things for like 40 bucks nobody wanted to take them off my hands back in 2008...


lot of stuff still for sale!

Smurf_240SX
12-28-2014, 07:02 PM
Wow lots of good stuff.

Myqueen14
12-28-2014, 07:32 PM
How's it going just wanted to know if still have all the power by max if so what would be the best package deal shipped to 92571 or if local willing to drive
Thank you here's my number 951 334 7187

moebiius
12-28-2014, 08:12 PM
Headlights for $800? Dont want to insult u bro but new ones are 275 each....at least thats what i saw on eGay, and your sideskirts....for $320? Thats ridiculously cheap.....great prices besides the headlights...what gives?
Tempo just sold a set from under me for $300, and i offered him $350!!!!
BTW your headlights look like USDM ones and not JDM, please correct me if I'm wrong

Akop
12-28-2014, 09:52 PM
Headlights for $800? Dont want to insult u bro but new ones are 275 each....at least thats what i saw on eGay, and your sideskirts....for $320? Thats ridiculously cheap.....great prices besides the headlights...what gives?
Tempo just sold a set from under me for $300, and i offered him $350!!!!
BTW your headlights look like USDM ones and not JDM, please correct me if I'm wrong

Yea they are USDM headlights, and yes you can get them much cheaper bnib as well. Pretty sure you can get a jdm front bumper new for 270$ as well.

Chachacha
12-28-2014, 10:11 PM
Not sure if I'm blinded and can't read, but how much for the whole front end

frmdabak187
12-28-2014, 10:43 PM
Rear hubs with bearings cash in hand.
714 654 0597

ShakotanGazelle
12-28-2014, 11:09 PM
Grille shipped to 76132?

Mr. Samurai
12-29-2014, 01:10 AM
Yea they are USDM headlights, and yes you can get them much cheaper bnib as well. Pretty sure you can get a jdm front bumper new for 270$ as well.

OK, then don't buy it.

I based my prices when i started working on my 240s and getting stuff back in 2008. haven't bought anything since.

prices fluctuated, i don't feel like reading up on prices, deal with it.

I'm in no hurry to sell.

Mr 240
12-29-2014, 07:02 AM
Hey tried to PM you but full inbox. I'm very interested in the PBM RUCA And Toe arms

Myqueen14
12-29-2014, 08:53 AM
I got your pm and tried to reply for all ur suspension parts but ur full anyways could u please text me to work out a deal on all ur suspension 951 334 7187
Thanks

Dboyizmlg
12-29-2014, 09:21 AM
Cool stuff!
Free bump and glws

acslater9
12-29-2014, 09:35 AM
PM sent.....

FaLKoN240
12-29-2014, 10:08 AM
OK, then don't buy it.

I based my prices when i started working on my 240s and getting stuff back in 2008. haven't bought anything since.

prices fluctuated, i don't feel like reading up on prices, deal with it.

I'm in no hurry to sell.

Some of your stuff got more expensive, some of your stuff is really easy to get now. Why post it if you're not going to market it with current pricing?

Mr. Samurai
12-29-2014, 10:59 AM
Some of your stuff got more expensive, some of your stuff is really easy to get now. Why post it if you're not going to market it with current pricing?

I haven't been on forums in a while, my interests are elsewhere.

I'm just looking to free up some space and get rid of my stuff and start something new.

FaLKoN240
12-29-2014, 11:00 AM
For sure. Just saying some of your stuff is worth more and worth less. I would totally pick up a lot of it if I wasn't focused on other things as well.


Sent from my iPhone using Tapatalk

Mr. Samurai
12-29-2014, 12:08 PM
For sure. Just saying some of your stuff is worth more and worth less. I would totally pick up a lot of it if I wasn't focused on other things as well.


Sent from my iPhone using Tapatalk

Yea I stopped posting and going to meets when the BS started getting out of hand. I enjoyed zilvia a lot more back In the day.

FaLKoN240
12-29-2014, 12:10 PM
Lol everyone always says that. Your shit will sell. Just a heads up you can get Jdm front and rear bumpers from some U.S. dealership part departments so the price has gone down since the supply is in the U.S. now.

Navan sides are a hella good deal from you. The headlights you can get new now, even JDM as well.

Not hating on your post you have a lot of stuff I wish I had lying around.


Sent from my iPhone using Tapatalk

Mr. Samurai
12-29-2014, 04:30 PM
to the guy who looked at my front bumper today, thanks for putting a giant scratch on the side. Stay classy Zilvia...

Sumslapper
12-29-2014, 06:45 PM
Nice parts. If you decide to ship, I will take the fenders and pbm toe rods.

Mr. Samurai
12-29-2014, 07:44 PM
Nice parts. If you decide to ship, I will take the fenders and pbm toe rods.

toe rods I'll ship no problem shoot me an offer, but the fenders are pretty risky to ship. Like i've told others before IF i ship, i'll be taking pictures before shipping so i'm not responsible for whatever happens in shipping.

If i ship its to the Paypal Address ONLY and i have the UPS store package it, shipped with the lowest priced shipping method.

Come_in_sidewayz
12-29-2014, 08:26 PM
Still have traction,tension,toe rods?
If so how much shipped to 92571?

EnergeticPhenom
12-29-2014, 08:45 PM
I'll buy all the brake master cylinder, MAX ( LCA, traction rods, toe rods, and tension rods). Let me know price shipped to 78729

Sumslapper
12-29-2014, 09:07 PM
emailed you

moebiius
12-30-2014, 12:07 AM
where in cali? come pick up the fenders....with sumassgrabber:mepoke:

Scotte02
12-30-2014, 02:24 AM
Do you have stock throttle cable for sale?

slidewaysfc3s
12-30-2014, 05:53 AM
Rb20 or 25 transmission for sale?

Mr. Samurai
12-30-2014, 10:51 AM
sold..........

Mr. Samurai
12-30-2014, 10:52 AM
Do you have stock throttle cable for sale?

Still got it. Shoot me an offer.

Mr. Samurai
12-31-2014, 12:21 AM
update the prices... Need to clear space by the 5th to make room for my new project.

Automatic
12-31-2014, 09:36 AM
Just wanna bump for an awesome dude and awesome stuff. Thanks for the lights & grill!

silverarrow27
12-31-2014, 02:51 PM
LMK if you'll be interested in letting the Quaife diff go even though you said you won't be parting anything out from the chassis. PM me price and your exact location if you're reconsidering.

kingJurzy
12-31-2014, 03:14 PM
Ill take your NRG hub combo and the Slider seat from you.

Jade350z
12-31-2014, 03:40 PM
where in cali?

interested in LARGUS SWAY BARS FRONT AND REAR & RSR exhaust (what piping size?)

phobic
12-31-2014, 05:49 PM
PM'ed you and emailed you (:

Alan_405
01-01-2015, 03:33 PM
Sent u a pm

Mr. Samurai
01-03-2015, 10:17 AM
Bump, still lots of stuff that I need to get rid of

Mr. Samurai
01-03-2015, 11:00 PM
Bump......!

Cloud_Strife
01-04-2015, 01:27 AM
Are you firm on the Tein coilovers? Seems a little high for used set when brand new is 1700.

Thanks.

Norman95
01-04-2015, 09:03 AM
Would you ship the hubs to NorCal, and yes I pay for shipping?

SDs13
01-05-2015, 09:43 PM
No longer want to invest on my 240 so I’m parting out my car and have the following up for sale. I don’t have pictures of all the items listed as they are still on the car, but I’ll post them up once I get around to it or if someone is interested, all items are not replicas or fakes if its listed as OEM or JDM that means it’s from Nissan USA or Nissan Japan.

I’ve tried to list all the names and specs of all the parts. I’m not listing the chassis up for sale until I’m done parting it out.


CASH or Verified Paypal.
NO TRADES (exception is with the coilovers)
SOCAL PICK UP ONLY.

I’ll consider best offer. DON’T PM me, box is almost full
Message or email me at [email protected], with your offer.

Engine
RB26DETT has TOMEI 2.8L Stroker Kit 77.7mm bore and 87.5mm stroke - 4000 - sold 12/28
Full Race twin scroll manifold – 1800 - sold 12/28
Turbos - Garret GTX2867R – 800 - sold 12/28
Engine management, BOV, Wastegates SOLD

OIL relocation kit, has radiator, and Thermostat, and external oil adapter. - 100
http://i.imgur.com/gk46pgU.jpg

Battery Box -100
to relocate the battery the RIGHT way.
its sealed, has a breather hose to vent the gases to the outside, has ties downs, and I'll even throw in a random battery post.
http://i.imgur.com/gxT884m.jpg
http://i.imgur.com/5KLA5kB.jpg


Exterior
OEM NEW radiator support - 300 - sold 12/29
JDM Nissan Kouki Front lip (OEM primer) NEW - 500 SOLD 12/28
JDM Nissan Kouki Rear Bumper (unpainted) – New 300 SOLD 12/29
JDM Nissan Kouki Side skirts (unpainted) – New 320 SOLD 12/28
Seibon Carbon Fiber Trunk – Used, no dents, no cracks, no scratches, like new 500 SOLD 12/29
Seibon Carbon Doors – NEW test fitted never used - 800 SOLD 12/28
JDM Kouki Grill (OEM gunmetal paint) 160 SOLD 12/30
JDM Nissan Kouki Front Headlights – Test fitted, never used 400 SOLD 12/30
Nissan Clear Corner Lights – Test fitted, never used -100 SOLD 12/30

OEM Front Bumper Retainer 100
http://i.imgur.com/X6fZH31.jpg

License plate Relocator - 75
allows you mount a US front license plate anywhere you choose to put this thing.
I mounted under the bumper next to my turn lights so my intercooler would breathbetter.
its on a hinge so you can angle your plate the JDM tyte angles.
http://i.imgur.com/azRUXmd.jpg
http://i.imgur.com/86CPv6R.jpg

JDM Nissan Kouki Front bumper (unpainted) NEW - 200
http://i.imgur.com/ZlcYOY1.jpg
http://i.imgur.com/fcQuw7O.jpg

reduced the price cause a zilvia memeber scratched it while he was checking it out... stay classy zilvia...
http://i.imgur.com/7C8xd3V.jpg
picture of the so called scratch that did not happen...

OEM Nissan Kouki Fenders (OEM primer) Test fitted, SOLD 1/3


JDM Nissan Amber Turning Lights – Test fitted, never used 80
http://i.imgur.com/VoZowDt.jpg

Seibon Carbon Fiber Hood – Used 200
has Moroso hood pins installed (so there are holes drilled) but aside from, there are no cracks, dents scratches, its why I’m selling it for cheap

OEM 240sx trunk, OEM white SOLD 1/3


Interior

NRG quick release/HUB/Lock - 100
http://i.imgur.com/5qubYze.jpg

Driver Door panel - SOLD 1/3

center console -40
http://i.imgur.com/bPQizQl.jpg

Two (2) Recaro sliders with the attached bracket for bolt in to a late model (zenki, Kouki 240sx) – used like new 150 EACH
Two (2) Recaro sliders with the attached bracket for bolt in to a 1996-2000 honda civic - like new 150 EACH
http://i.imgur.com/Kl45MLV.jpg

Two (2) Recaro SRD reclinable bucket seats NEW 400 EACH – Like new, no tears, no stains, perfect working condition
http://i.imgur.com/TAd2z5V.jpg

Two (2) Recaro Full kevlar SPG Race seats with brackets 800 EACH - know what you're getting into when you're getting this, this is nowhere near adjustable. - sold 12/28

Random Oem interior pieces covered in CF
I went through a CF period in my life. dont judge me
http://i.imgur.com/5XgbDRR.jpg

NARDI 330mm steering wheel, red stitching, three spokes – 230
http://i.imgur.com/elFNT27.jpg
http://i.imgur.com/3a0rEIt.jpg



Brakes
Z32 Front brakes calipers – 4 piston with Larger baer brake discs slottled and drilled, stainless steel braided lines, and cobalt friction pads. I don’t remember the disc diameter, but they are larger the oem Z32’s, you NEED a 17 inch rim to fit them. 800
http://i.imgur.com/LLbZvvp.jpg
http://i.imgur.com/MNToCV0.jpg

Z32/Skyline rear brakes and E-BRAKE– 2 pistons with slotted discs, it comes with the separate E-brake mechanism. SOLD 1/1/15
Skyline/Z32, E-brake cables – NEW still in package 100 SOLD 1/1/15
OEM – NEW still in box break master cylinder 1 1/16 size, needed to push enough brake fluid needed for the bigger brakes 80 - sold 12/29

5-Lug Hubs 150
Front and Rear http://i.imgur.com/zDpUYhe.jpg

Suspension
MAX Power adjustable traction rod – anodized orange and gold/yellow NEW still in box 140 - sold 12/29
MAX Power adjustable tension rod – anodized orange and gold/yellow NEW still in box 140 - sold 12/29
MAX Power adjustable toe rod – anodized orange and gold/yellow NEW still in box 140 - sold 12/29
MAX Power adjustable lower control arm – powder coated orange with fitting anodized gold/yellow 180 - sold 12/29
TEIN coilover damper controller - sold 12/28

TEIN Superdrift coilovers – used, in perfect working condition 1000
http://i.imgur.com/zJ8BTm6.jpg
http://i.imgur.com/KUrYDim.jpg
you even get the their sticker to let everyone know you're JDM as F*ck.
http://i.imgur.com/adSy0FL.jpg

LARGUS SWAY BARS FRONT AND REAR– finally found the documentation bars and docuemnts are still in perfect condition. - 400
http://i.imgur.com/WkxBZxq.jpg
http://i.imgur.com/GMuRuVq.jpg
http://i.imgur.com/ALZOY8I.jpg

Wheel
Gram Lights 57 Maximum – 17x9JJ +12 offset bronze 114.3 bolt pattern, used, one of the wheels has curb rash but very slight - 1000
http://i.imgur.com/9D81hhi.jpg
http://i.imgur.com/AaXKUob.jpg curb rash on top, bottom, just the paint, no metal/rim damage
http://i.imgur.com/pQYMaZf.jpg
http://i.imgur.com/sEKVdXO.jpg in a different angle
http://imgur.com/7iyjdat.jpg details
http://imgur.com/pBObUff.jpg

Bronze color tire stems - 50
- to match the bronze rims
http://i.imgur.com/DoyiDIv.jpg
brand new
http://i.imgur.com/NQeyAVO.jpg

Volk CE28 Mag Blue 17x9JJ +12 offset, 114.3 hole pattern NEW 2000 - sold 12/28
Racing lugnuts, Rainbow Anodized comes with the security key and lugs for wheels with 5 holes SOLD 12/28


RSR exhaust (CAT BACK) used, no dents, bumps aside from it being dirty it looks new 600.
http://i.imgur.com/mDdnpm5.jpg
http://i.imgur.com/HtmYV9v.jpg
http://imgur.com/a/iSHPD.jpg
http://i.imgur.com/MK1rzTs.jpg
http://i.imgur.com/XRYC0b8.jpg


Car relays, these are the side to accept a standard auto relay. -20
http://i.imgur.com/xZwPEsp.jpg

Random Cherry Picker thown in ITS HEAVY YOU NEED A SUV, VAN OR TRUCK - SOLD 1/3


Chassis No.1 SOLD 12/29
I AM NOT PARTING ANYTHING FROM THIS CHASSIS
Stitch welded frame
no sound deadening anywhere
Brembo 6 pot front
Brembo 2 pot rear
Brembo 2 pot ebrake
10 point welded cage
Quaife Dif 2.0
CF driveshaft
Ohlins all way adjustable
ARP extended studs
MAX ARMS - ALL
Shell has a custom brake pop valve
E-cut switch on the quarter panel opposite fuel
Race fuel tank in trunk
battery container in trunk
NOT STREET LEGAL
(still clean title though)
ONLY SENDING PICS TO SERIOUS BUYERS
Hey Mr samurai
I'm interested in your nrg gear. I'm PayPal ready and live in San Diego 92139

Let me know
Al

Mr. Samurai
01-07-2015, 12:18 AM
late night bump!

the bee guy
01-08-2015, 12:42 PM
Emailed you about the SRD's. What city are you in and what's your number? Pls email me back at [email protected]

EvilEgg13
01-08-2015, 02:39 PM
Would you part out the quick release Lock only?

Mr. Samurai
01-08-2015, 07:43 PM
Would you part out the quick release Lock only?

yup shoot me an offer.

EvilEgg13
01-09-2015, 07:02 AM
yup shoot me an offer.

PM Sent to you.

Mr. Samurai
01-10-2015, 06:01 PM
Weekend bump........

Mr. Samurai
01-11-2015, 09:55 PM
End of the week bump

imthedirector
01-17-2015, 02:35 PM
If youre willing to ship, ill take that nardi wheel

2fastandfurious
01-18-2015, 02:38 AM
You still have driver side axle? 6 bolts pm thanks

Mr. Samurai
01-18-2015, 07:19 PM
You still have driver side axle? 6 bolts pm thanks

Sorry thats been sold

Sketch42k
01-18-2015, 07:28 PM
Do you have the trunk latch? (Top and bottom)

Mr. Samurai
01-23-2015, 08:01 PM
weekend bump

Mr. Samurai
01-23-2015, 08:02 PM
Do you have the trunk latch? (Top and bottom)
no not anymore, its gone

mala86
07-18-2015, 11:46 AM
hey, i was wondering if you still had your car? If so dose it have a sunroof?

Oo GrEg
09-23-2015, 04:53 PM
PM'd if this is still active.

StuckeyOG
09-24-2015, 01:49 PM
I got the Seibon trunk, New JDM Kouki Bumper and front/rear 5 lug hubs with ARP studs from him for a great deal. No complaints here.

He said he was getting out of the 240 game when I purchased this last December.
Don't know if he's still around, but if so, bump for a legit seller.

He even walked me through why the trunk wouldn't line up when I couldn't figure out why and I kept bugging him after install. Very nice of him, considering he didn't have to and it was my first experience with carbon fiber.

If you're still around Mr. Samurai, thanks for all the help back when I was a 240 scrub lol. Hope your new project is bad ass!