5-lug, Fuel tank/pump, wilwood brakes, Stance coilovers, PBM drop knuckles MAF +MORE!

[INeedNewTires]

Everything located in ft. worth tx. Shipping is available you pay for it. Paypal accepted. i have a 100% feedback rating. EMAIL me for fastest response [email protected]

Stance S14 GR+ PRO coilovers. no leaks, nothing blown, fully disassembled and cleaned and verified everything in good working order. 9k/6k spring rates. Modified rear lower mount to a 3/4" heim joint to be solid on the knuckle. PBM rear drop knuckles modified to accept heim joint. Everything was engineered properly and works fantastic. 4 events since modification no issues. Selling because i'm now sponsored by a different coilover company and therefore cannot run these. $1200 for coilovers and drop knuckles.

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/r270/10801881_10152543562663354_6928738480920166832_n.j pg?oh=ca2844a2cdc334a5fda6dd7c42a56cb1&oe=554778D1&__gda__=1426413170_abada9b450bb83af349c92c77d66d38 6

https://scontent-b-atl.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/r90/988867_10152543562703354_2677965119418345747_n.jpg ?oh=ec9c0fcf3917a1a8bbad51ec78697d1b&oe=55032BC1

Schassis 5 lug front and rear. Extended ARP front studs that were pressed in (not just gunned in with a nut, that stretches and fatigues the stud) I specifically got the 1.25 thread pitch with the quick-start nose because they are they best (and the most expensive, $87 for 5) all bearings perfect all studs perfect $250

https://scontent-b-atl.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/1512818_10152543562463354_4182358138299375647_n.jp g?oh=7a807f461cad19bbb3c293afea1830d8&oe=5513BF06

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10850207_10152543562413354_437733033859712375_n.jp g?oh=ed001105739d464e431a3b4a1ff8372f&oe=5501231D&__gda__=1427721079_c5da7bcbc787a2e195e12af6e4e9eaa 9

I have a stock S14 fuel tank with a 300lph Denso fuel pump (oem TT supra) already installed properly in the hanger with wiring and everything. Everything works 100% perfect! The tanks had a small crack that has been repaired. does not leak, has fuel sending unit, cap, vent, all tubes, everything works. would be great for turbo setup or just replace your damaged tank. I Do no recommend E85 in stock tank. $150 for everything picked up in Ft worth. NO SHIPPING on tank, but will part with pump assembly if needed and ship that. no pics (if you really need some i'll get some but c'mon)

J60 MAF. Originally for an RB but works like a Z32 (N60/62) just maxes out at 450hp instead of 500hp) 5 pin MAF without pigtail. $75 obo

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10850187_10152543562773354_2256253973695379897_n.j pg?oh=1a806ad38eb2d30971e4c3ea4a822240&oe=55185018&__gda__=1427805198_c61a32d21acc9d6bbc40f63200fa1f8 7

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10846460_10152543562838354_4373060991679999073_n.j pg?oh=f7e2aed3be92df02c49e524f6bc2a3aa&oe=5515D0DE&__gda__=1426864328_bd2d2b6b9f9a7b80d9152fef9934833 d

SICK OF YOUR BRAKE BOOSTER AND SLOPPY PEDAL FEEL?

S13/14 Wilwood Manual Brake Setup. 100% complete! everything you need to bolt up and have a sick manual braking setup. only used 1 weekend! everything is clean and 100% fully functioning. It comes with reverse hanging pedal assembly, proportioning valve, remote resovoirs, all pre bend hard brake lines with race wrap, all hoses and fittings, etc. 100% bolt in setup! I bought everything brand new from Summit. Only Motul ever run through it. PM for any questions. This will work with any caliper setup but i recommend at minimum Z32 fronts. $350

https://scontent-b-atl.xx.fbcdn.net/hphotos-xpa1/t31.0-8/977808_10151450168793354_1516802735_o.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfa1/t31.0-8/976104_10151450168803354_245732390_o.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc3/t31.0-8/919452_10151450169308354_255711272_o.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/923029_10151450169373354_613499190_n.jpg?oh=be1e8c 2566fa767bffce71cb948cc131&oe=551AC5EC&__gda__=1425654469_397ddebacec66862931fd295720038d b

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/943494_10151450169633354_1692544809_n.jpg?oh=8b4a6 031fb964d5c61ce685fa5882563&oe=55442B95&__gda__=1427115342_34de9d574b31c2b8e0e41b2cff17ce5 c

18x10 +0 iForge Seneka wheels. BALLER! just a pair of them, priced to sell!! couple small scratches and some small divits on the lip pictured. asking $950 for the pair OBO

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/976291_10151451274773354_1118375521_o.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/t31.0-8/919665_10151451274718354_1956372926_o.jpg

https://scontent-b-atl.xx.fbcdn.net/hphotos-xpa1/t31.0-8/s960x960/976660_10151451274873354_1098101085_o.jpg

Hoosier Race slicks! 275/40-17 4x heat cycles on them still TONS of life left. $200 for all 4 picked up in ft worth tx!

https://scontent-a-atl.xx.fbcdn.net/hphotos-xfp1/t31.0-8/976928_10151451263593354_552916944_o.jpg

Z32 300ZX rear e-brake setup. $100

comes nearly complete ready to bolt up to your S- chassis. just a few clips and 1 spring missing (couple bucks from nissan) you will need R33 e-brake lines or you will need to cut and splice your stock ones. $100 obo

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/389667_10150708525808354_225043787_n.jpg?oh=302904 1db85083c556b4864a26b69ea5&oe=5516BAB3&__gda__=1427116640_783d48da3ae0470b678c136bfa99b6d 2

[INeedNewTires]

bump numero unooooo

[INeedNewTires]

5lug SOLD send offers for other stuff

[sr84]

whats the best price for the wheels

[kunt_masha]

how much for just the rear drop knuckles?

[JAP327]

Price on just the rear knuckles?

[niSm095]

For using those rear ebrakes on an s-chassis,nc are the heat shields necessary or will yours work as is? (minus the parts needed to complete)

[INeedNewTires]

Guys I dont want to split the coilovers and knuckles because you will need to machine a small spacer to take up the 2MM gap from the 3/4" heim so they should stay together. If you want to deal with all that then just buy the whole setup and sell your coilovers.

I will however drop the price of the setup to help accommodate some of you. Now asking $1099



Nismo095 The head shields can be cut off to accomodate any size rotor or just for aesthetic reasons but it does not have to be retained. The center section however does need to be used for proper spacing and mounting points.

[INeedNewTires]

5lug SOLD!

make offers on other stuff people

[Bashar_finalstage]

Willing to sell the knuckle alone?

[T_hardonnnn]

Check your inbox sir