PDA

View Full Version : MI A ton of sr20det and s13 stuff for sale!


nismo_bill
12-02-2014, 01:12 PM
Hey everyone, I have decided to sell off my s13 sr20det stuff. I’m going in a different direction with the car, and I will no longer need this stuff. When I build something I try to use the highest quality products I can afford. So there is some decent stuff here.
Built Head. This head was put together and packaged up.
Quick run down:
S13 head CBN decked, valve seats cut and 3 angle valve job $330 worth of machining alone at my discounted rate.
Supertech valve springs, titanium retainers, seats and Supertech valve seals. Another $400
Will sell just the head with valves/retainers/springs/seals/ cam caps for $899
Unopened Kelford 188-x cams. 266 intake and 270 exhaust durations $589 new will sell for $499 FIRM
Cosworth headgasket BNIB $180 new will sell for $150 FIRM

Will sell full head package Head/springs/valves/retainers/seats/seals/cams/oem cam gears/rockers/lifters/head gasket. You install cams/rockers/lifters. $1399 –Comes with valve cover you save $200+ on this deal!
Rebuilt SR20det shortblock. All OEM internals, s14 oil pump, Freddy oil pan -$599
Will sell as long block package. You assemble $1699 –You save $450+on this deal!
SR20det trans comes with clutch and flywheel. Looking for $275 -comes with harness too
Want long block and clutch tranny setup? $1899 you come get it and assemble yourself. Will come free with used ARP head studs, wiring harness, and 62 ecu. Will also throw intake and exhaust manifolds for a decent deal. You save well over $750 with this package!!!
Used Garret BB GT3076R still in good shape, has broken stud on DP housing. Looking for $599 if you buy the Long block/tranny deal I will throw this in for $499
Ebay T2 tubular manifold thing. Fuckinnn $100 I dunno..
Stock Sr20det turbo manifold $70
Stock intake manifold, comes with TB Injectors and whatever else is attached, $200
Clean red top valve cover $75 or free to whoever buys head package.
Not so clean blue s13 valve cover. $50
Blown s13 shortblock, spun bearing fucked crank, block is good. Deck to pan whatever is attached is yours $100
Extra head- needs decked and clean not sure of condition, would be perfect for mockup stuff like manifolds.. Has Supertech springs/seats/retainers-$300
4 lug hubs, brakes, rotors, pads, softlines-$200 for everything.
4 lug teardrops with decent tires-$350 has center caps!
S13 sr20det wiring harness wires in OK shape all plugs seem to be accounted for $100- free with engine package.
62 ECU $100 or free with engine package.
EMUSA dual side exit intercooler with random BOV $175 was set up with an RB engine.
2 sets of stock s13 cams will come with 1 set of gears. $75
KYB excel gas struts. All 4 $100
Front tension rods. I have 4 of these $100 takes them all
Extended front LCA pushed out 1” TIG welded square stock for the stretch. SOLD
Bucket-o- Bolts lots of bolts and shit or whatever. $20 and it’s yours. –free with engine/trans package.
Oem RUCA’s/RLCA -$50
OEM traction rods -$45
OEM Camber ams -$45
Powersteering pump -$35 –free with engine package
Alternator $35- free with engine package.
I also have more shit that I am more than likely forgetting. I listed about $4300 or so worth of parts that are still in good shape, aside form the blown extra SR.

Want everything? Drive over with a truck and give me $2850. You’ll get everything on this list. Plus whatever else I have lying around. I may even toss in the engine stand. I am really negotiable on prices unless stated firm.

all parts are located near Kalamazoo MI.

will accept paypal, or cash.

contact me on here via posting or PM. Lets make some deals.

-B

http://i108.photobucket.com/albums/n21/nismo_bill/38A09F15-4CA2-4ECE-93CF-7A6B71AF9A82.jpg (http://s108.photobucket.com/user/nismo_bill/media/38A09F15-4CA2-4ECE-93CF-7A6B71AF9A82.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/D61A4C41-96CC-4873-BB96-E5A4BB821A6F.jpg (http://s108.photobucket.com/user/nismo_bill/media/D61A4C41-96CC-4873-BB96-E5A4BB821A6F.jpg.html)

http://i108.photobucket.com/albums/n21/nismo_bill/FBE15A2A-8FCE-430F-A2E9-526374DB61F9.jpg (http://s108.photobucket.com/user/nismo_bill/media/FBE15A2A-8FCE-430F-A2E9-526374DB61F9.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/64C0BDC8-D300-4060-9B29-92CDB241B62A.jpg (http://s108.photobucket.com/user/nismo_bill/media/64C0BDC8-D300-4060-9B29-92CDB241B62A.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/BB2737B3-4EEF-4481-99F3-001CD37ECF17.jpg (http://s108.photobucket.com/user/nismo_bill/media/BB2737B3-4EEF-4481-99F3-001CD37ECF17.jpg.html)

http://i108.photobucket.com/albums/n21/nismo_bill/379AF728-D7C9-430D-AF18-A0D2FD9C12B9.jpg (http://s108.photobucket.com/user/nismo_bill/media/379AF728-D7C9-430D-AF18-A0D2FD9C12B9.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/42B4EFC7-C9FD-4D01-9A80-D8E505E5DFA2.jpg (http://s108.photobucket.com/user/nismo_bill/media/42B4EFC7-C9FD-4D01-9A80-D8E505E5DFA2.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/A5B35302-4B0A-4674-A920-808F71AA84D0.jpg (http://s108.photobucket.com/user/nismo_bill/media/A5B35302-4B0A-4674-A920-808F71AA84D0.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/7E7B74BF-E496-40FD-B0A4-B2716AA74552.jpg (http://s108.photobucket.com/user/nismo_bill/media/7E7B74BF-E496-40FD-B0A4-B2716AA74552.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/AEB89214-C25D-47F0-9EDE-F5D0B396ADF4.jpg (http://s108.photobucket.com/user/nismo_bill/media/AEB89214-C25D-47F0-9EDE-F5D0B396ADF4.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/1D9C5305-918B-48D4-B19E-958ED670B327.jpg (http://s108.photobucket.com/user/nismo_bill/media/1D9C5305-918B-48D4-B19E-958ED670B327.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/B3281DC3-E0BF-4805-8CAA-2F06385D186C.jpg (http://s108.photobucket.com/user/nismo_bill/media/B3281DC3-E0BF-4805-8CAA-2F06385D186C.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/070022F4-1552-4901-BF26-806683A35A66.jpg (http://s108.photobucket.com/user/nismo_bill/media/070022F4-1552-4901-BF26-806683A35A66.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/308742AE-1737-40CD-8B17-47EE91A844D8.jpg (http://s108.photobucket.com/user/nismo_bill/media/308742AE-1737-40CD-8B17-47EE91A844D8.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/1529F090-CBA3-4974-936E-0EDB0A739EDC.jpg (http://s108.photobucket.com/user/nismo_bill/media/1529F090-CBA3-4974-936E-0EDB0A739EDC.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/E1294CB6-3638-4DCA-B44C-4ED86B96131C.jpg (http://s108.photobucket.com/user/nismo_bill/media/E1294CB6-3638-4DCA-B44C-4ED86B96131C.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/68D7639A-9B8C-43B9-821B-CF3456AC0706.jpg (http://s108.photobucket.com/user/nismo_bill/media/68D7639A-9B8C-43B9-821B-CF3456AC0706.jpg.html)

JSimpson
12-03-2014, 12:20 AM
do you have the stock S13 SR20 throttle cable bracket? bolts to the IM just behind the TB with 2 bolts. Gold I believe.

nismo_bill
12-03-2014, 09:53 AM
I will check tomorrow.

I willgive this thread a week or so, then i will start listing things on ebay.

TheRealSy90
12-03-2014, 12:01 PM
Do you have a set of rocker arm guides? The slotted shims.

nismo_bill
12-03-2014, 01:01 PM
Do you have a set of rocker arm guides? The slotted shims.

I know i have one full set. I am hoping to sell them with the complete head. as for the ones in the other head i may have lost some, i was going to run dual guide shims for machined rockers but i didnt get that far before deciding to get a crate engine...


also, LCA's are sold

TheRealSy90
12-03-2014, 03:06 PM
That's what i'm trying to do is find another set to do dual rocker guides on my built head..

1jzsilcoupe
12-04-2014, 09:14 AM
Since I used to live in Kalamazoo, would you sell just the coil pack cover off the sr valve cover and ship it to Arizona?

nismo_bill
12-04-2014, 12:38 PM
Since I used to live in Kalamazoo, would you sell just the coil pack cover off the sr valve cover and ship it to Arizona?

sure, what do you think is a fair price shipped?


As for the rocker guides, i only have one set. I'd prefer to sell them with the head.

JSimpson
12-04-2014, 03:28 PM
Did you end up having that throttle cable bracket?

josh_cooper
12-04-2014, 03:47 PM
Willing to part with the crank?

1jzsilcoupe
12-04-2014, 05:31 PM
Would 20$ shipped be enough?

penco
12-15-2014, 02:05 AM
Pm sent regarding..

nismo_bill
12-15-2014, 07:15 PM
Sorry everyone, I decided to just keep all this stuff. I'm. Not in the hole on it and I'm just gong to find a coupe or something and toss this SR in. As for the random oem stiff, look for our on ebay.

Mods lock thread please.

ty5565
12-15-2014, 08:53 PM
ssssoooo that #62 ecu wont be for sale? http://i53.photobucket.com/albums/g54/southernseanachi/Puss-In-Boots-Sad-Kitty.jpg

GripStigma
12-15-2014, 10:33 PM
sr ps pump? does it come with the bracket?