PDA

View Full Version : CA SR Forged Pistons and Rods

Purestock240
08-30-2014, 07:03 PM
soold thanks
Slow96240sx
08-31-2014, 09:06 PM
How much for just rods
Purestock240
09-02-2014, 03:18 PM
prefer not to split but inbox me an offer
Purestock240
09-03-2014, 12:48 PM
holy bump does nobody want a high power SR?
Purestock240
09-08-2014, 11:53 AM
bumppppppp
Purestock240
09-10-2014, 01:32 PM
best offer
sr20time
09-10-2014, 06:42 PM
Should have.taken my offer months ago for 500!
Purestock240
09-10-2014, 07:35 PM
Should have.taken my offer months ago for 500!

Should not have...
LuckyRPS13
09-11-2014, 04:02 AM
The CP pistions Started out at 86.5mm which is 0.5mm bigger than the stock pistions. So heads up to every one you will need to bore your block. Which is not a big deal if you are doing this upgrade. I learned the unexpected way with the same set I picked up from another member here. I won't even post what I paid for a set, but the rods did need some work.

GLWS!
Purestock240
09-11-2014, 11:31 AM
The CP pistions Started out at 86.5mm which is 0.5mm bigger than the stock pistions. So heads up to every one you will need to bore your block. Which is not a big deal if you are doing this upgrade. I learned the unexpected way with the same set I picked up from another member here. I won't even post what I paid for a set, but the rods did need some work.

GLWS!

this is true, theyre .5 over
Purestock240
09-24-2014, 01:51 PM
bumppppppp