Bleeding a Clutch? HELP

[Jays_240sx]

I recently had my motor rebuilt and I had to diconnect the clutch line. I noticed when I touch my clutch now that the clutch just slaps to the floor without barely touching it.

Could anyone direct me in a tutorial for bleeding a hydraulic clutch or know any tips? I've never done it before.

[cotbu]

Jack left side of the vehicle and secure. Locate the clutch master remove the cap. Fill with brake fluid, locate slave cylinder. Get a 10mm wrench and long hose that'll fit on the bleeder, place the hose in a bottle. Crack open the bleeder. Pump clutch pedal about 5 times leave pedal down. Look at the bottle is the hose submerged in fluid no add more fluid to the master pump pedal 8 times leave pedal down. Check bottle, is the hose submerged? close bleeder screw. Remove hose and bottle. Check master fluid level. Lift pedal off floor. Step on pedal with foot. Feel feed back adjust free play if necessary.

Sent from my Highly Tuned Galaxy S3.4!!!

[cotbu]

Oh yeah put the car back down on the ground:cool:

Sent from my Highly Tuned Galaxy S3.4!!!

[WIKID S4TEEN]

^Wait...place CMC cap back on, lol.

[Jays_240sx]

Thank you for the help, I'll try that soon!

[cotbu]

^Wait...place CMC cap back on, lol.

Yeah that too;) and put the cap on unused brake fluid and close the hood.

Sent from my Highly Tuned Galaxy S3.4!!!

[scott883]

You could have looked on YouTube..... Or googled that...

[Jays_240sx]

You could have looked on YouTube..... Or googled that...

Already check youtube...... and google.....
..........

[zombiewolf513]

And you havent figured it out?

[Jays_240sx]

I figured it out, the clutch is bled.