mr.nismo.
05-26-2014, 11:10 PM
Alright so here's the deal. I got reffed for my SR. i dont have a place to do a swap and sadly i have to let it go.
Ok another edit. This is super fuckin unlikely but I'll put it out there. If someone wants this SR setup but doesn't want to deal with the shell, AND has any of the following motors: VQ35de, LS1, 2jzge, I will figure out something for an area to swap and follow through with BAR and tell the state to royally fuck itself. I'm honestly tired of being nervous as fuck every time I drive past a patrol car.
THE CAR WILL NOT LOOK LIKE HOW IT IS NOW
Aero
OEM 180sx wing, painted gloss black 260$ picked up
FRP real valences: 160$
FRP side skirts (the ones made by Driven08) 180$ picked up
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0006_zps5577369d.jpg
The Swap
IM NOT PARTING OUT. It's my DD and cannot just sit around.
What's Included:
S13 Blacktop SR (around 58K on rebuild) ive had it since around 45k. I tore this bitch down before i put it in my car, and looked great. The t25 had no shaft play when i checked it about 7 months ago. i DD it and doubt its fucked up but i will check if i have a SERIOUS buyer
Wiring Specialties SR PRO harness
ARC induction box with K&N filter
Blitz front mount with Blitz SS BOV
a one piece exhaust from DP to catback. 3 inches all the way. Custom DP and tanabe medalion catback
walbro 255
tomei type s FPR
isis pullies
oil filter relocation kit
125 amp quest alternator with cody ace bracket
Koyo RAD
Flex-a-lite fans that run ON THEIR OWN. i did a PROPER wire up with a temp probe in the upper rad hose
PBM swirl pot
CS overflow tank
greddy catch can
isis braided high pressure ps line
Circuit Sports starter
sanyco CMC with isis braided clutch line and tockiko slave
Interior stuff
Greddy Profec B Spec 2
i have 6 gauges
Prosport: water temp, boost, oil press, oil pemp, and volt
Innovate: MTX-L wideband. i bought the serial to usb cable so you can hook it straight up.
The cluster has red needles and white LED
manual to power window aftermarket conversion
battery box strapped down with carquest battery
Other options/dilemma
I have 30mm z32 front brakes with 15/16 master and braided conversion lines. i do not have stock brakes to swap. Therefore if you bring your own wheels that can clear these its not an issue. If not my current wheels are XXR 962 18x9.5 and 18x8.5 with dunlop DZ102's THEY ARE 3 WEEKS OLD and the tread is still practically brand new. You would be paying extra to keep my wheels and tires.
Price
4200 for whats "included"
another 1000 if your keeping wheels/tires
For whats included there is over 5500 in parts and thats excluding what the brake setup is worth.
I have no problem taking someone on a test drive, however i will NOT let anyone drive the car. It doesnt matter if youve owned some crazy powered car im not taking the risk.
Dont fucking bother lowballing. Im already pissed im having to get rid of the car. Otherwise other questions post or PM.
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0023_zps4e2322d2.jpg
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0022_zpse0a0b62b.jpg
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0021_zps1c503841.jpg
Ok another edit. This is super fuckin unlikely but I'll put it out there. If someone wants this SR setup but doesn't want to deal with the shell, AND has any of the following motors: VQ35de, LS1, 2jzge, I will figure out something for an area to swap and follow through with BAR and tell the state to royally fuck itself. I'm honestly tired of being nervous as fuck every time I drive past a patrol car.
THE CAR WILL NOT LOOK LIKE HOW IT IS NOW
Aero
OEM 180sx wing, painted gloss black 260$ picked up
FRP real valences: 160$
FRP side skirts (the ones made by Driven08) 180$ picked up
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0006_zps5577369d.jpg
The Swap
IM NOT PARTING OUT. It's my DD and cannot just sit around.
What's Included:
S13 Blacktop SR (around 58K on rebuild) ive had it since around 45k. I tore this bitch down before i put it in my car, and looked great. The t25 had no shaft play when i checked it about 7 months ago. i DD it and doubt its fucked up but i will check if i have a SERIOUS buyer
Wiring Specialties SR PRO harness
ARC induction box with K&N filter
Blitz front mount with Blitz SS BOV
a one piece exhaust from DP to catback. 3 inches all the way. Custom DP and tanabe medalion catback
walbro 255
tomei type s FPR
isis pullies
oil filter relocation kit
125 amp quest alternator with cody ace bracket
Koyo RAD
Flex-a-lite fans that run ON THEIR OWN. i did a PROPER wire up with a temp probe in the upper rad hose
PBM swirl pot
CS overflow tank
greddy catch can
isis braided high pressure ps line
Circuit Sports starter
sanyco CMC with isis braided clutch line and tockiko slave
Interior stuff
Greddy Profec B Spec 2
i have 6 gauges
Prosport: water temp, boost, oil press, oil pemp, and volt
Innovate: MTX-L wideband. i bought the serial to usb cable so you can hook it straight up.
The cluster has red needles and white LED
manual to power window aftermarket conversion
battery box strapped down with carquest battery
Other options/dilemma
I have 30mm z32 front brakes with 15/16 master and braided conversion lines. i do not have stock brakes to swap. Therefore if you bring your own wheels that can clear these its not an issue. If not my current wheels are XXR 962 18x9.5 and 18x8.5 with dunlop DZ102's THEY ARE 3 WEEKS OLD and the tread is still practically brand new. You would be paying extra to keep my wheels and tires.
Price
4200 for whats "included"
another 1000 if your keeping wheels/tires
For whats included there is over 5500 in parts and thats excluding what the brake setup is worth.
I have no problem taking someone on a test drive, however i will NOT let anyone drive the car. It doesnt matter if youve owned some crazy powered car im not taking the risk.
Dont fucking bother lowballing. Im already pissed im having to get rid of the car. Otherwise other questions post or PM.
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0023_zps4e2322d2.jpg
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0022_zpse0a0b62b.jpg
http://i1099.photobucket.com/albums/g398/dev71893/S13-5/_DSC0021_zps1c503841.jpg