FS: Uber Rare Nismo S13 Axle Back Muffler

[cheesesteak]

This muffler is in excellent condition. Came off a RPS13 180SX, exhaust is no longer produced. I've had this in my possession for quite some time now. My plan at the time, was to put this on my S13 hatch. Since I no longer own a S13, I have no need for this nice looking awesome piece.

The exhaust is a fully stainless steel body with a 4.5" angle tip. The piping measures close to 3", good for those running DET or RB setup. Old Nismo Motorsports logo stamped on bottom of muffler and on flange. Have a few flaws (see pics): have a minor dent on top of tip and scratches on the bottom of the muffler body. Muffler has some weight to it due to it being a quality made piece.

***** EDIT 5/29 2:35 AM ET *****
This is ONLY for the rear muffler. I do not have the rest of the exhaust system. You will need to fabricate a matching size midpipe to connect to this muffler.

Asking $325 OBRO, buyer pays for shipping and 4% PP fees.

If anyone is interested, send me a PM.

Thanxs!

Sorry for the large pics, hosting it off FB.

https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/t31.0-8/1504179_10202539565428445_7247600129434098148_o.jp g

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/t31.0-8/10321662_10202539567188489_9124753001438358681_o.j pg

https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/t31.0-8/10255049_10202539568948533_636048147694515180_o.jp g

https://scontent-b-iad.xx.fbcdn.net/hphotos-frc3/t31.0-8/10296075_10202539570428570_988062882813112515_o.jp g

https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/t31.0-8/10007326_10202539571468596_8340262888729444979_o.j pg

[Cease_Super_Hicas]

Is this just the exhaust tip only or full catback

[mitcheyismyname]

Add says axle back..

[cheesesteak]

Willing to listen to best reasonable offers. Need to clear out space.

[racepar1]

That's not even an axle back, that's a muffler only. NOBODY EVER made an axle-back exhaust for an S13 in the first place.

[cheesesteak]

A muffler would not have any flange or tip on them. I know you've heard the term cat-back system - components after the cat. Same can be said for anything after the axle. You may disagree that it's only a muffler, correct but it's provisioned already to be connected to the mid-pipe.

[drift213]

I sold a full catback og NISMO exhaust for 300..on the other hand this exhaust sounds great better than anything else I've owned

[No 240.. No id]

That's not even an axle back, that's a muffler only. NOBODY EVER made an axle-back exhaust for an S13 in the first place.

Before you start taking a sh** on someones thread, go and educate your self. Tanabe make an axle back exhuast for an s13 and so to nismo. http://m.ebay.com/itm/270904740948?nav=SEARCH

Just because YOU haven't seen them much, doesn't mean there are NONE.

[ZX88]

your missing the rest of the catback.

[racepar1]

A muffler would not have any flange or tip on them. I know you've heard the term cat-back system - components after the cat. Same can be said for anything after the axle. You may disagree that it's only a muffler, correct but it's provisioned already to be connected to the mid-pipe.

To be defined as an "axleback" exhaust it should be able to bolt onto the STOCK exhaust from the axle back. Since stock s13/s14 exhausts are one-piece from the cat back NOBODY EVER made an axleback system. Let's be honest. You're missing the rest of the exhaust, which does NOT make it an axle-back exhaust. It makes it a nice muffler that's missing the piping. Nobody cares if it has the flange. The rest of the exhaust would have to be fabricated anyways. It's a muffler, NOTHING more...

Before you start taking a sh** on someones thread, go and educate your self. Tanabe make an axle back exhuast for an s13 and so to nismo. http://m.ebay.com/itm/270904740948?nav=SEARCH

Just because YOU haven't seen them much, doesn't mean there are NONE.

The link you posted was to a catback exhaust dumbfuck. Since stock s13/s14 exhausts are one-piece from the cat back NOBODY EVER made an axleback system. I've been doing this for a LOT longer than you have so don't try and lecture me on what I've seen.

[cbeuglas]

I had a blitz axel back at one time for an s13. This was pre turbo days


Sent from my SAMSUNG-SGH-I337 using Tapatalk

[No 240.. No id]

To be defined as an "axleback" exhaust it should be able to bolt onto the STOCK exhaust from the axle back. Since stock s13/s14 exhausts are one-piece from the cat back NOBODY EVER made an axleback system. Let's be honest. You're missing the rest of the exhaust, which does NOT make it an axle-back exhaust. It makes it a nice muffler that's missing the piping. Nobody cares if it has the flange. The rest of the exhaust would have to be fabricated anyways. It's a muffler, NOTHING more...



The link you posted was to a catback exhaust dumbfuck. Since stock s13/s14 exhausts are one-piece from the cat back NOBODY EVER made an axleback system. I've been doing this for a LOT longer than you have so don't try and lecture me on what I've seen.
I'm not gone to argue with a retard on someones thread. For some reason, all old members on here think they own this forum, i don't know what they get to shit on someones thread. Op hoodluck with the sale and from my parts, sorry for jacking your thread.

[FRpilot]

Before you start taking a sh** on someones thread, go and educate your self. Tanabe make an axle back exhuast for an s13 and so to nismo. http://m.ebay.com/itm/270904740948?nav=SEARCH

Just because YOU haven't seen them much, doesn't mean there are NONE.


The OP's exhaust is a 2 piece catback exhaust system... that's missing the other piece of the piping so it's essentially a muffler.

I have both a blitz nurspec r and blitz realize tt catback exhausts and they are both 2 piece just like that. There are many other aftermarket 2 piece catback exhaust systems out there.

I believe it is an honest mistake by OP, but posting it as an "axle back exhaust" is misleading to unknowledgeable buyers who will think it will just bolt on. it will not bolt onto anywhere and you will either have to make custom piping or cut off your stock muffler and weld/attach it to your stock piping.

Source: I've been doing this longer than him

[racepar1]

I believe it is an honest mistake by OP, but posting it as an "axle back exhaust" is misleading to unknowledgeable buyers who will think it will just bolt on. it will not bolt onto anywhere and you will either have to make custom piping or cut off your stock muffler and weld/attach it to your stock piping.

I agree completely, I also think it's an honest mistake.



My point of posting here was never to "shit" on anyone's thread. I was simply trying to correct misleading information. When someone responds with an ignorant argument it annoys me, that's all, nothing more.



OP: That is a pretty nice and definitely rare muffler, you should just advertise it as such.

[cheesesteak]

FRpilot and racepar1, thank you for clarifying. Yes, it was an honest mistake. Made the change in my thread to reflect any misleading information.

Anyway for someone to change the main thread title?

Don't be afraid to make a reasonable offer (no lowball offers, thank you) for the muffler, the worst thing I could say is no.