Complete High HP SR Partout Plus a Bunch More 240 Parts!!!! Complete Parts Car!!

[Purestock240]

SR PARTS

Located in Canada! I ship to the states weekly though so thats not a big deal.
Paypal or cash
PM or text if interested 705 441 2693

I'm parting out pretty much complete car lots of OEM and aftermarket stuff. I'll update it as I go along but here's a start. All parts are for s13 SR unless otherwise stated

ASK ME ABOUT ANY OEM PART NOT MENTIONED AS IM PARTING A WHOLE CAR


SR20 Eagle Rods and CP Pistons,
Rods: http://www.frsport.com/Eagle-CRS5365N3D-SR20-SR20DET-Chromoly-Forged-Connecting-Rods_p_1367.html
Pistons (stock bore): http://www.frsport.com/CP-Pistons-SC7325-325-Nissan-SR20DET-86-5mm-9-1_p_8504.html
Ignore the fact that theyre dirty, pic was taken right when they where pulled.
New these are $1106.32 from FRsport without bearings, plus bearings, plus tax, plus shipping
I'll sell them for $950 with rod bearings.
https://farm8.staticflickr.com/7252/14010997074_4d1b357831_z.jpg

SR20 Oil pan, scratches but no dents $50
https://farm3.staticflickr.com/2923/14023019471_bdaa06bbd6.jpg

SR timing chain guides. Like new very little wear $60
https://farm8.staticflickr.com/7169/13988541606_a01235d43b.jpg

SR valve cover, with gasket. $70
https://farm8.staticflickr.com/7127/14008447642_7e6a7dc1b4.jpg

SR valve shims, $60
https://farm3.staticflickr.com/2908/13988517236_10b454e390.jpg

SR20 red top head (with cam caps and rockers, not pictured), about 15,000 miles on rebuild. take all of it $300
lifters $80
rockers $80
springs $40
valves $60
bare head and caps $75
https://farm8.staticflickr.com/7158/13992794453_44797b0fdd.jpg

SR20 Oil block with sensor $50
SR20 Cam angle sensor sold
SR20 motor mount brackets sold
SR20 Alternator bracket $40
SR20 Dipstick $40
SR20 Coil pack sub harness, $30
SR20 Knock Sensor and harness $35
SR20 OEM Intake support $20
SR20 Coolant block with sensors and lines $60
SR20 Dust sheild tranny plate $50

https://farm8.staticflickr.com/7393/13901930801_0aa0399a15.jpg


SR20 Intake top Half $40
SR20 Intake Bottom Half $35
SR20 Fuel Rail $30, +$10 for caps and screws (not pictured)

https://farm8.staticflickr.com/7435/13902083916_f226087414.jpg

HKS Cam Gears, asking for $320, these retail for $380
https://farm8.staticflickr.com/7334/13919646331_ddf60a1107.jpg

SR IACV $50
https://farm4.staticflickr.com/3760/13943418364_91865b6099.jpg

SR20 Rockers, $80
SR20 Crank Pulley $50
SR20 Head Bolts and Washers $50
SR20 OEM Water Pump with low miles $40
https://farm6.staticflickr.com/5242/13936385276_74a832aa54.jpg

Will Update with more later! Complete engine is being parted out. Forged bottom end, Head and block, Accessories, N62 maf and plug.


OTHERS

Random chassis parts
https://farm4.staticflickr.com/3671/13786979424_d9127c177d.jpg (https://flic.kr/p/n1iSDN)
DEI Turbo heat sheild and header wrap. its all in there and brand new. $50
https://farm4.staticflickr.com/3820/13495549455_5ed961c5df.jpg (https://flic.kr/p/myydFa)
Flexalite fan controller $45
https://farm8.staticflickr.com/7187/14024931791_1c2357af39.jpg

Hydro ebrake with lines. $175
http://farm4.staticflickr.com/3332/12976568895_05660ff5fc.jpg (http://flic.kr/p/kLGiQt)
Dual tip exhaust
catback $sold, test pipe $60 down pipe $70

http://farm8.staticflickr.com/7450/12976603735_7e177298b5.jpg (http://flic.kr/p/kLGuca)

LHD handbrake $20
http://farm8.staticflickr.com/7392/12976937714_e18a4099f0.jpg (http://flic.kr/p/kLJctq)

S13 coupe tails and garnish. $90
http://farm8.staticflickr.com/7307/12992680553_32723ac7b1.jpg (http://flic.kr/p/kN7TgF)

BEGI Fuel pressure regulator $80.
http://farm8.staticflickr.com/7313/12992810895_17207a2703.jpg (http://flic.kr/p/kN8y1X)

[Purestock240]

bummpppppp

[adams 02rs]

DEI Turbo heat sheild and header wrap. its all in there and brand new.. Pm me please. Bump.

[Purestock240]

DEI Turbo heat sheild and header wrap. its all in there and brand new.. Pm me please. Bump.


PM'd its all there and new.

[Purestock240]

sold a few things

[RocketBUNNY]

Do you happen to have an sr ignitor chip?

[Nikzilla]

I need the flywheel inspection cover w/ hardware. It bolts into the back of the upper oil pan.

[Purestock240]

Do you happen to have an sr ignitor chip?

Nope

I need the flywheel inspection cover w/ hardware. It bolts into the back of the upper oil pan.

have it, PM me

[Purestock240]

hand brake sold

[mlhiser]

Is the iacv still available?

[SidewayzAsFck]

Coil pack harness still available? Shoot me some pics of it at 3155427933. Need one with no broken clips, tears or etc

[s14_trev]

If you still have the fan controller how much shipped to Calgary t2w3s4

[Kanigit00]

SR PARTS

Located in Canada! I ship to the states weekly though so thats not a big deal.
Paypal or cash
PM or text if interested 705 441 2693

I'm parting out pretty much complete car lots of OEM and aftermarket stuff. I'll update it as I go along but here's a start. All parts are for s13 SR unless otherwise stated

ASK ME ABOUT ANY OEM PART NOT MENTIONED AS IM PARTING A WHOLE CAR


SR20 Eagle Rods and CP Pistons,
Rods: http://www.frsport.com/Eagle-CRS5365N3D-SR20-SR20DET-Chromoly-Forged-Connecting-Rods_p_1367.html
Pistons (stock bore): http://www.frsport.com/CP-Pistons-SC7325-325-Nissan-SR20DET-86-5mm-9-1_p_8504.html
Ignore the fact that theyre dirty, pic was taken right when they where pulled.
New these are $1106.32 from FRsport without bearings, plus bearings, plus tax, plus shipping
I'll sell them for $950 with rod bearings.
https://farm8.staticflickr.com/7252/14010997074_4d1b357831_z.jpg

SR20 Oil pan, scratches but no dents $50
https://farm3.staticflickr.com/2923/14023019471_bdaa06bbd6.jpg

SR timing chain guides. Like new very little wear $60
https://farm8.staticflickr.com/7169/13988541606_a01235d43b.jpg

SR valve cover, with gasket. $70
https://farm8.staticflickr.com/7127/14008447642_7e6a7dc1b4.jpg

SR valve shims, $60
https://farm3.staticflickr.com/2908/13988517236_10b454e390.jpg

SR20 red top head (with cam caps and rockers, not pictured), about 15,000 miles on rebuild. take all of it $300
lifters $80
rockers $80
springs $40
valves $60
bare head and caps $75
https://farm8.staticflickr.com/7158/13992794453_44797b0fdd.jpg

SR20 Oil block with sensor $50
SR20 Cam angle sensor sold
SR20 motor mount brackets sold
SR20 Alternator bracket $40
SR20 Dipstick $40
SR20 Coil pack sub harness, $30
SR20 Knock Sensor and harness $35
SR20 OEM Intake support $20
SR20 Coolant block with sensors and lines $60
SR20 Dust sheild tranny plate $50

https://farm8.staticflickr.com/7393/13901930801_0aa0399a15.jpg


SR20 Intake top Half $40
SR20 Intake Bottom Half $35
SR20 Fuel Rail $30, +$10 for caps and screws (not pictured)

https://farm8.staticflickr.com/7435/13902083916_f226087414.jpg

HKS Cam Gears, asking for $320, these retail for $380
https://farm8.staticflickr.com/7334/13919646331_ddf60a1107.jpg

SR IACV $50
https://farm4.staticflickr.com/3760/13943418364_91865b6099.jpg

SR20 Rockers, $80
SR20 Crank Pulley $50
SR20 Head Bolts and Washers $50
SR20 OEM Water Pump with low miles $40
https://farm6.staticflickr.com/5242/13936385276_74a832aa54.jpg

Will Update with more later! Complete engine is being parted out. Forged bottom end, Head and block, Accessories, N62 maf and plug.


OTHERS

Random chassis parts
https://farm4.staticflickr.com/3671/13786979424_d9127c177d.jpg (https://flic.kr/p/n1iSDN)
DEI Turbo heat sheild and header wrap. its all in there and brand new. $50
https://farm4.staticflickr.com/3820/13495549455_5ed961c5df.jpg (https://flic.kr/p/myydFa)
Flexalite fan controller $45
https://farm8.staticflickr.com/7187/14024931791_1c2357af39.jpg

Hydro ebrake with lines. $175
http://farm4.staticflickr.com/3332/12976568895_05660ff5fc.jpg (http://flic.kr/p/kLGiQt)
Dual tip exhaust
catback $sold, test pipe $60 down pipe $70

http://farm8.staticflickr.com/7450/12976603735_7e177298b5.jpg (http://flic.kr/p/kLGuca)

LHD handbrake $20
http://farm8.staticflickr.com/7392/12976937714_e18a4099f0.jpg (http://flic.kr/p/kLJctq)

S13 coupe tails and garnish. $90
http://farm8.staticflickr.com/7307/12992680553_32723ac7b1.jpg (http://flic.kr/p/kN7TgF)

BEGI Fuel pressure regulator $80.
http://farm8.staticflickr.com/7313/12992810895_17207a2703.jpg (http://flic.kr/p/kN8y1X)
Interested In diff and axels?
Are they still available?

[Purestock240]

Interested In diff and axels?
Are they still available?

yea, but shipping would kill to MN

[Purestock240]

bumppppppp

[Migit240sx]

PM if you have Power Steering set up minus the pump. Overall looking for:
High pressure Lines and Reservoir

[Purestock240]

dont have one

[sil14zenki]

would def take that head if i was in canada... glws

[milk_with_pulp]

Any information on the differential and or axles?

What type of DIFF / AXLES

[Purestock240]

bumpppppppppp