FS/part out 91 240sx Red Caged,suspension,Version Select,OEM,JDM,Drift

[JTunedMotorsports]

Here for sale is my personal project/drift car--CAR IS SOLD.

I will give the customer the option of if they buy the car I will drop an sr20det in it if they provide engine or help them put most of it together..I am selling b/c I have other cars and no time to drive it..Id like to see a buyer put it back together and race it. I can part it out but rather have the bare or chassis sold before putting package deals together. I have 13k in it besides labor I put in, But want whatever I can get for the chassis and parts. The price breakdown is all over the place based on what someone wants.


91 couple base model...red clear title NO RUST. Never beat on or drifted etc..Was a street car..
PM me your # or Pm me for any questions.


Parts

all parts are new
all subframes cleaned and new bolts installed
Energy suspension master busing kit
Solid S13 SPL alum sub frame bushings
8 point cage tig welded..miged floor plates
oem dash bar tied in-dash fits back in..no cutting
.120 wall 1.75 mild steel cage material-corner gussets
custom hydro ebrake kit with braded lines
rebuilt and blasted z32 calipers..new seals etc
Z32 ferrodo ds2500 brake pads f-r
Agency power z32 braided conversion lines f+r
Brembo blank rotors all around
16/17 new z32 master cylinder-sold
New abs booster s13-sold
Nismo power brace s13-sold
Kazama tension rods-sold
S14 tein inner tie rods with spacer
SPL tie rod ends with bump steer adjustment
SPL full rear arms. ruca, tension, toe, traction
SPL steering rack bushings
R32 steering wheel
2x names tow hook bars
Inside,cage and bay were sealed, primed and painted with oem -2008 nissan gtr red…then clear coated..I have extra paint etc.
30mm ichiba wheels spacers
25mm ichiba wheels spacers
Kryokugen lug nuts with 2 keys-sold
17x9 rpf1 front 5x114.3 wheels
18.9.5 rpf1 rear 5x114.3 wheels
3x falken azenis tires
Aerocatch lockeing hood pins

Complete set of paint, primer, sealer, etc 3k worth of paint supplies

Rebuilt rear oem 4.08 r200 diff..Welded properly. Pre-heated
MA-Motorsports steering angle knuckle kit. gusset FLCA with energy suspension bushing kit installed
Moog ball joints
Ichiba 5 lug hub conversion

I have all doors, glass, windows, moldings, wiring harnesses,climate control,vents, every bolt, bracket etc for the car..in boxes labeled
2 keys, title, dash..all vins on the car etc...many new bolts for the car were installed,.



Brick Headlights with bulbs
OEM Nissan amber corner lights

New Body kit Version Select IV Kit
front 20 mm single vent fender type 2
Tatakidashi Rear Fender (50mm)
Origin s13 silvia vented type 2 hood..(Rare)



Pics here:

http://s636.photobucket.com/user/J-TunedMotorsports/library/?sort=3&page=1



http://i636.photobucket.com/albums/uu89/J-TunedMotorsports/24070_382180358745_292880683745_3693765_281144_n.j pg (http://s636.photobucket.com/user/J-TunedMotorsports/media/24070_382180358745_292880683745_3693765_281144_n.j pg.html)

http://i636.photobucket.com/albums/uu89/J-TunedMotorsports/DSC00843.jpg (http://s636.photobucket.com/user/J-TunedMotorsports/media/DSC00843.jpg.html)

http://i636.photobucket.com/albums/uu89/J-TunedMotorsports/DSC00863.jpg (http://s636.photobucket.com/user/J-TunedMotorsports/media/DSC00863.jpg.html)

http://i636.photobucket.com/albums/uu89/J-TunedMotorsports/IMG_1475.jpg (http://s636.photobucket.com/user/J-TunedMotorsports/media/IMG_1475.jpg.html)


Body it is this one.minus the blister rear over fenders.

http://www.speedhunters.com/2009/10/drivers_blog_gt_gt_vaughn_gittin_jr_the_life_the_d eath_and_the_resurrection_of_the_zombie_car/

[ilovemycoupe]

Would you sell brick headlights and bulbs ?

[dynamiteshovel]

Can you give me a price on the brake master cylinder shipped to Fl?

Sent from my SPH-D710VMUB using Tapatalk

[dizzyoj]

are the knuckles s13 or s14?

[JTunedMotorsports]

Can you give me a price on the brake master cylinder shipped to Fl?

Sent from my SPH-D710VMUB using Tapatalk

I have new ones in stock..pmd

[JTunedMotorsports]

are the knuckles s13 or s14?

S13 everything.

[SmokeCircle]

Interested in spl adjustable arms. On me details if you'll ship to 22124

[bluz370]

How much for the rear overs shipped to dallas tx?

[Tywin]

Pm'd

Sent from my SAMSUNG-SM-N900A using Tapatalk

[sr20240coupe]

How much are looking to get for it? With all the goodies!

[JTunedMotorsports]

Everyone I Have to sell the Chassis first, wither bare or with some parts, before I completely part it out. Some of these parts I have for request I can get dupes and ship to you.

[white92hb]

bricks still for sale? im in nj will come pick up if willing to part with

[JTunedMotorsports]

bricks still for sale? im in nj will come pick up if willing to part with
like i said when I can get rid of the chassis, all the parts will go.

[white92hb]

my bad just read the whole ad. please keep me in mind:squintd:
like i said when I can get rid of the chassis, all the parts will go.

[240s3x]

how much for the shell? Including Doors, Fenders, Trunk, ect...

[kunt_masha]

Where are you located?

Interested in the full chassis or just the rear spl setup

[JTunedMotorsports]

Hey everyone I cannot sell any parts untill I get a buyer for the chassis bc I may be making a deal by throwing in various parts to make the deal. Then I can part out.

[supersayianjim]

sad face. I really want that bumper(picked up)

[JTunedMotorsports]

sad face. I really want that bumper(picked up)


Bumper? I can sell you the whole kit minus over fenders and rear overs.

[SmokeCircle]

Energy suspension master busing kit
Solid S13 SPL alum sub frame bushings
8 point cage tig welded..miged floor plates
oem dash bar tied in-dash fits back in..no cutting
.120 wall 1.75 mild steel cage material-corner gussets
custom hydro ebrake kit with braded lines
rebuilt and blasted z32 calipers..new seals etc
Z32 ferrodo ds2500 brake pads f-r
Agency power z32 braided conversion lines f+r
Brembo blank rotors all around
16/17 new z32 master cylinder
New abs booster s13
Nismo power brace s13
Kazama tension rods
S14 tein inner tie rods with spacer
SPL full rear arms. ruca, tension, toe, traction

Inside,cage and bay were sealed, primed and painted with oem -2008 nissan gtr red…then clear coated..I have extra paint etc.

Rebuilt rear oem 4.08 r200 diff..Welded properly. Pre-heated

I have all doors, glass, windows, moldings, wiring harnesses,climate control,vents, every bolt, bracket etc for the car..in boxes labeled
2 keys, title, dash..all vins on the car etc...many new bolts for the car were installed

LMK how much for this set up ^^^ I would obviously bring my own parts to replace the ones i dont want. Shoot me a PM

[shephurd]

i am interested in coilovers, bride seat/rails, and steering/suspension parts. I am in PA for the summer so let me know if we can work something out.

[240zach]

I'm interested in the hydro ebrake lines. What was the master? Pm me cash in hand


Sent from my iPhone using Tapatalk

[sharad909]

Interested in 5 lug Ichibi front hubs
Andddddddd... Humm.. the f+r rotors

[eastoahu]

How much for all rear arms

[JTunedMotorsports]

How much for all rear arms
Kept rear arms.

[JTunedMotorsports]

I'm interested in the hydro ebrake lines. What was the master? Pm me cash in hand


Sent from my iPhone using Tapatalk
PM'd you the details.

[JTunedMotorsports]

Interested in 5 lug Ichibi front hubs
Andddddddd... Humm.. the f+r rotors
the were sold with the car.