Big SR20 Partout. Will Ship

[Purestock240]

Located in Canada! I ship to the states weekly though so thats not a big deal.
Paypal or cash
PM or text if interested 705 441 2693

I'm parting out pretty much complete car lots of OEM and aftermarket stuff. I'll update it as I go along but here's a start. All parts are for s13 SR unless otherwise stated

SR20 coil packs, $25 each,
SR20 throttle body (will need TPS replaced) $40
SR20 Waterneck $25
SR20 temp sensor $25
SR20 thermostat $25
https://farm6.staticflickr.com/5197/14104705593_fb2ffe496a.jpg


SR20 Eagle Rods and CP Pistons,
Rods: http://www.frsport.com/Eagle-CRS5365N3D-SR20-SR20DET-Chromoly-Forged-Connecting-Rods_p_1367.html
Pistons: http://www.frsport.com/CP-Pistons-SC7325-325-Nissan-SR20DET-86-5mm-9-1_p_8504.html
Ignore the fact that theyre dirty, pic was taken right when they where pulled.
New these are $1106.32 from FRsport without bearings, plus bearings, plus tax, plus shipping
I'll sell them for $900 with rod bearings.
https://farm8.staticflickr.com/7252/14010997074_4d1b357831_z.jpg

SR20 Oil pan, scratches but no dents $50
https://farm3.staticflickr.com/2923/14023019471_bdaa06bbd6.jpg

SR timing chain guides. Like new very little wear $60
https://farm8.staticflickr.com/7169/13988541606_a01235d43b.jpg

SR valve cover, with gasket. $70
https://farm8.staticflickr.com/7127/14008447642_7e6a7dc1b4.jpg

SR valve shims, $60
https://farm3.staticflickr.com/2908/13988517236_10b454e390.jpg

SR20 red top head (with cam caps and rockers, not pictured), about 15,000 miles on rebuild. take all of it $300
lifters $80
rockers $80
springs $40
valves $60
bare head and caps $75 but not for sale unless a few other small things sell off it.
https://farm8.staticflickr.com/7158/13992794453_44797b0fdd.jpg

SR20 Oil block with sensor $50
SR20 Cam angle sensor sold
SR20 motor mount brackets sold
SR20 Alternator bracket $40
SR20 Dipstick $40
SR20 Coil pack sub harness, sold
SR20 Knock Sensor and harness sold
SR20 OEM Intake support $20
SR20 Coolant block with sensors and lines sold
SR20 Dust sheild tranny plate $50

https://farm8.staticflickr.com/7393/13901930801_0aa0399a15.jpg


SR20 Intake top Half $40
SR20 Intake Bottom Half $35
SR20 Fuel Rail $30, +$10 for caps and screws (not pictured)

https://farm8.staticflickr.com/7435/13902083916_f226087414.jpg

HKS Cam Gears, asking for $320, these retail for $380
https://farm8.staticflickr.com/7334/13919646331_ddf60a1107.jpg

SR IACV sold
https://farm4.staticflickr.com/3760/13943418364_91865b6099.jpg

SR20 Rockers, $80
SR20 Crank Pulley $50
SR20 Head Bolts and Washers $50
SR20 OEM Water Pump with low miles $40
https://farm6.staticflickr.com/5242/13936385276_74a832aa54.jpg


SR Timing Chain, low km $40
https://farm6.staticflickr.com/5217/14089707403_62ceba4742.jpg


Will Update with more later! Complete engine is being parted out. Forged bottom end, Head and block, Accessories, N62 maf and plug.

[eric mcgarrh]

still have that sidemount?

[Purestock240]

still have that sidemount?


Yea shipping won't be cheap though, PM me


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[iamtheyi]

need n62 maf and connector

[Purestock240]

need n62 maf and connector

PM'd

10char

[hobbs]

Happen to have a stock ECU?

[Purestock240]

Happen to have a stock ECU?

keeping it sorry.

added cam gears and iacv

[coupesallday!]

Price on bottom end/block I don't need head or anything else.

[Kingtal0n]

Pming you about parts

[SidewayzAsFck]

Sr coil pack harness $25 shipped 07062?

[Purestock240]

PMs Replied

[Purestock240]

Price on bottom end/block I don't need head or anything else.

going to sell block locally, forged pistons and rods will be posted soon though

[Purestock240]

Added a few things, bottem end coming soon

[Frydways]

do you have the air/oil separator? goes from the T on the valve cover to the breather tube on the back of the block.

[Purestock240]

do you have the air/oil separator? goes from the T on the valve cover to the breather tube on the back of the block.

already gone.

[Purestock240]

added head

[nismo_bill]

If you have any bolts for the brackets that go to the front and side of the engine, need them. PS bracket, water pump pulley. etc.etc.

[Purestock240]

If you have any bolts for the brackets that go to the front and side of the engine, need them. PS bracket, water pump pulley. etc.etc.


sending PM

[TheRealSy90]

What's the condition on the crank pulley? Also do you have a set of the rocker arm guide shims?

[TheVizena93]

Might be interested in pistons and rods. Waiting on pics

[Purestock240]

What's the condition on the crank pulley? Also do you have a set of the rocker arm guide shims?

pretty good, car had no ac so middle belt grooves have a bit of surface fust. have full set of shims

[Purestock240]

Might be interested in pistons and rods. Waiting on pics

hopefully tomorrow

[Tkoppab]

Crank condition??? Shipped to 91331

[Purestock240]

Crank condition??? Shipped to 91331

I didnt have the right socket to get the eagle rods off, I'll post an update when i get it apart

[Vegass13]

Have the clutch fan and shroud??


Sent from my iPhone using Tapatalk

[Purestock240]

Have the clutch fan and shroud??


Sent from my iPhone using Tapatalk

nope sorry.

Got the rods and pistons out, updating thread.

[Drifterxxl180]

Whats the word on crank?

[Purestock240]

Whats the word on crank?

crank is good I just havent pulled it yet

[Tkoppab]

Lmk when you do. Thanks

[Purestock240]

updateddddd

[Drifterxxl180]

Payment sent for crankshaft!

[Purestock240]

Payment sent for crankshaft!

Crank sold.
Will hopefully add valve cover and a few other things today

[Purestock240]

valve cover, shims and guides posted.

more to come tomorrow

[Purestock240]

added a few things

[Purestock240]

tails sold

[sr20time]

Ontario Canada? Give me a text 250 540 0427 might want the piston setup

[Purestock240]

Ontario Canada? Give me a text 250 540 0427 might want the piston setup

text sent.
.

[Purestock240]

knock sensor sold

[Purestock240]

sub harness sold

[Purestock240]

more stuff added

[Purestock240]

cleared out my inbox. sorry about that

[Purestock240]

Added oil pan

[niki205]

pistons are 86,5mm ?

[Purestock240]

pistons are 86,5mm ?

yes they are

[Purestock240]

sold a few more things

[Purestock240]

lowered a few prices

[S14tyger]

I need the crank text me 7046987058

[Purestock240]

whaaaaaaaat^

[Nikzilla]

Payment for flywheel inspection cover sent

[Purestock240]

Payment for flywheel inspection cover sent

got it I'll try and ship today

[Purestock240]

added a few things

[Mandooh240]

Would like the bare head. What else off of it do you need gone in order for it to be sold? 9092136746 LOCAL PICK-UP.

[Purestock240]

youre a bit far for local pick up sorry

[Purestock240]

starter sold

[Purestock240]

saturday night broke my racecar and my wallet bump

[Javi802]

will you sell the rods separately?

[Purestock240]

will you sell the rods separately?

if you find someone to buy the pistons aswell sure

[Purestock240]

few more things sold

[Purestock240]

bumppppp
vote for me in the fast eddie search for speed
Billy Melenhorst
http://beta.fasteddieracewear.com/search-for-speed/
https://farm8.staticflickr.com/7339/13984959580_efaa459486.jpg

[Purestock240]

spring bump

[Purestock240]

sold a few things