PDA

View Full Version : VA Authentic Made in Japan C's Shifter for 5 Speed S13 S14 SR20/KA24/CA18


Bernie (NoVA)
04-12-2014, 02:10 PM
I have a used Genuine C's Shifter for S13 and S14 CA18/SR20/KA24/RB20 5 Speed Transmissions - bought in Japan on my most recent trip. Authentic, real deal no BS. These have been long discontinued, as C's is no longer in business. Cheap knock offs break, wear down and rattle because they lack the rubber vibration isolator in the shift lever.

Complete ready to install kit with all needed parts.
Boot is like new, no tears, bushing is in clean shape.
Instruction sheet will be included.

$175 picked up in Alexandria
$185 shipped
PayPal adds 3%

http://www.yugobernie.com/images/Cs_Quick_Shift/240SX/cs_1.jpg
http://www.yugobernie.com/images/Cs_Quick_Shift/240SX/cs_4.jpg
http://www.yugobernie.com/images/Cs_Quick_Shift/240SX/cs_2.jpg

Bernie (NoVA)
04-26-2014, 01:04 AM
Updated.
Top side.

jr_ss
04-26-2014, 07:37 AM
For all you S-chassis rookies out there, this is one of the best shifters you can get. Buttery smooth shifts, with no vibration or rattles like the cheap crap on the market now. I had one years ago before I swapped to a Z32 trans.

GLWS Bernie...

Bernie (NoVA)
05-21-2014, 01:05 PM
GLWS Bernie...

Thanks back to top.

LoSt180
05-22-2014, 12:54 PM
NVM. Bump for good seller!

RocketBUNNY
05-22-2014, 01:27 PM
If buddy doesn't get back to me about the turbo and turbo mani I'm suppose to buy from him tonight I'll probably talk to you tomorrow and snag this up

Bernie (NoVA)
05-25-2014, 11:33 AM
If buddy doesn't get back to me about the turbo and turbo mani I'm suppose to buy from him tonight I'll probably talk to you tomorrow and snag this up

Sounds good. Let me know.

Bernie (NoVA)
06-08-2014, 05:50 AM
NVM. Bump for good seller!

Thanks back to top.

mewantkouki
06-08-2014, 07:12 AM
I've got one too, and I paid more than the OP's price... Bump!

Bernie (NoVA)
06-26-2014, 11:50 PM
I've got one too, and I paid more than the OP's price... Bump!

Thanks much appreciated

nextproject
06-28-2014, 11:05 AM
Any ideas on the knob height as compared to stock? B&M? Ive currently got a B&M and yeah, it rattles at ~4500 rpm, plus ive got a C's on my SW20 and i love it, just concerned that the knob will sit higher as compared to my B&M. have you installed this? can you comment on the shift knob height?

Bernie (NoVA)
06-28-2014, 11:17 AM
Installed height is the same as stock

Bernie (NoVA)
07-17-2014, 08:55 PM
Top side for July

Bernie (NoVA)
08-10-2014, 10:53 PM
Back to the front

Mr.slipngrip
08-10-2014, 11:14 PM
will this work with a rb25?

bigs
08-11-2014, 09:18 AM
i'll take it, sent you a pm

Bernie (NoVA)
08-11-2014, 09:27 AM
will this work with a rb25?

I know its also listed for RB20 trans, but it can be used in a RB25 with a simple modification.

NismoPlsr
08-11-2014, 06:15 PM
It will not work with RB25, the bushing is different and so is the spacer.

Mr.slipngrip
08-11-2014, 08:17 PM
Thanks for the info there Nismo saved me there lol , guess I'll be passing on this one :(

BoostTaco
08-12-2014, 04:14 AM
You have a pm.

Bernie (NoVA)
08-12-2014, 01:15 PM
Thanks for the info there Nismo saved me there lol , guess I'll be passing on this one :(

Did a bit more research - its simple to modify for RB25 use, just needs a different shifter bushing and ~1mm trimming on the spacer.

Mr.slipngrip
08-27-2014, 02:59 PM
sent you a pm.

Mr.slipngrip
09-06-2014, 05:47 PM
Soo any new on shipping?