tranny question...

[TheSparo]

alright so i have my old ka tranny sitting in my garage and know that the sr and ka trannies are interchangeable once you swap the bell housings... and i got all the bolts out for the housing... but i cant get the fucker loose, any suggestions? i used a hammer and prying... gimme some suggestions please
-Jeff

[kandyflip445]

Dead blow hammer or a chisel and a hammer.

[kandyflip445]

Oh, also, did you take off the front cover INSIDE the bellhousing first?

[TheSparo]

no i wasnt aware of any bolts in there... i guess i could try that...

[shoes59]

Oh, also, did you take off the front cover INSIDE the bellhousing first?And behind the cover you need to remove the C clip holding the upper bearing in place.