Bash Bars - Bumper Supports - Rear Bumper Support - Jacking Points - S13 & S14 - $150

[Sonic Motor]

New thread can be found here:

http://zilvia.net/f/showthread.php?p=5653864#post5653864

[om3ga]

These are LEGIT I have seen them, test fitted them and everything they are definitely the best bolt on solution bash bars i have EVER seen.

[Silviacraze05jr]

awesome, will order soon.

[Seraphim38]

I want one for the front S13 hatch. My front aftermarket bumper doesn't fit at all, and this might help me mount it up.

[jamg]

i like that look on that hatch.. can't justify the price for that though.. i wish it were free shipping :/

maybe with that thing on top of the bar, it will finally be worth it to get one. cars are still getting so messed up in wrecks with bash bars on.

[johnydoesit]

I would just like to know how strong/safe they are to use as jack points.

[ATLspeed]

How are these with you basic FMIC set up? Doesn't seem like it would clear. Going to be using a 4" thick intercooler is the reason I ask.

[Dek-Thai]

I would just like to know how strong/safe they are to use as jack points.

Same question plz and also do u have pics of oem silvia front bumper and rear bumper mounted?

[Sonic Motor]

I want one for the front S13 hatch. My front aftermarket bumper doesn't fit at all, and this might help me mount it up.

It will definitely get rid of bumper sag and create a strong support for it to rest on.

i like that look on that hatch.. can't justify the price for that though.. i wish it were free shipping :/

maybe with that thing on top of the bar, it will finally be worth it to get one. cars are still getting so messed up in wrecks with bash bars on.

These bars are cheaper than a pair of high quality suspension arms. I can freight ship these as well, but it will take a bit longer. Bash bars were never meant to prevent a car from getting damaged in a hard hit. If you hit something hard enough, the bar will bend.

I would just like to know how strong/safe they are to use as jack points.

How are these with you basic FMIC set up? Doesn't seem like it would clear. Going to be using a 4" thick intercooler is the reason I ask.

The jacking points are very strong. It is designed to help you jack up the car faster if you are only tying to get the tires off the ground, ie. a tire change. The bars are designed to clear intercoolers. Almost any size intercooler will clear depending on how you mount it.

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/t1/1512453_539505592823062_805382939_n.jpg

Same question plz and also do u have pics of oem silvia front bumper and rear bumper mounted?

The stock bumpers will fit just like stock except you will no longer use the OEM bumper retainer. Unfortunately I don't have any pictures of OEM bumpers at the moment.

[moco]

I got a S13 coupe with a supermade rear bumper you think that bash bar with the jacking point on the back will clear that supermade bumper

[da_crew10]

No s14 rear with jackpoint?

[Sonic Motor]

I got a S13 coupe with a supermade rear bumper you think that bash bar with the jacking point on the back will clear that supermade bumper

The Supermade bumper is shallower than the stock S13 bumper. I talked to Street Faction and he said he's not sure since he hasn't gotten a chance to try one. If you could send me dimensions of your bumper I can verify if it will fit or not.

No s14 rear with jackpoint?

Not at the moment. I believe something is in the works.

[alwyzDTF]

Im rocking a street faction s14 kouki bash bar test fitted to a JDM kouki front bumper, but I'm using a USDM front bumper and it fits and functions perfect. Lights and intercooler clear with no problems.

[xDRFTurR1D3x]

S13 coupe rear w\o jack points shipped to 73099 please!

[Sonic Motor]

Im rocking a street faction s14 kouki bash bar test fitted to a JDM kouki front bumper, but I'm using a USDM front bumper and it fits and functions perfect. Lights and intercooler clear with no problems.

Thank you very much for your input!

S13 coupe rear w\o jack points shipped to 73099 please!

Sent you a PM!

[collegekid]

I sent you guys a Pm, but I also figured I'd post here.

I am looking for a front and rear bar for my car. It's a 1996 with a S15 radiator support and front end. Stock S15 front bumper.
I am told the S15 Rad support and Kouki Rad supports are fairly similiar.
Do you guys have anything compatible? I am also interested if you guys can make some sort of headlight support, seperate from the bash bar as in another bolt on piece.

I am also interested in a rear bash Bar/jack point for my S14 and ready to buy whenever you produce them. Thank you very much.

[Sonic Motor]

I sent you guys a Pm, but I also figured I'd post here.

I am looking for a front and rear bar for my car. It's a 1996 with a S15 radiator support and front end. Stock S15 front bumper.
I am told the S15 Rad support and Kouki Rad supports are fairly similiar.
Do you guys have anything compatible? I am also interested if you guys can make some sort of headlight support, seperate from the bash bar as in another bolt on piece.

I am also interested in a rear bash Bar/jack point for my S14 and ready to buy whenever you produce them. Thank you very much.

A rear bar hasn't been made yet for the S14, but I believe it's in the works. The factory bumper mounting location was not modified when installed the S15 core support, correct? Unfortunately, headlight supports cannot be added on as that is a very custom job that will need to be done one site.

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[nyc240sx]

any pics of s14 kouki please text me 6465912341 or pm

[Sonic Motor]

any pics of s14 kouki please text me 6465912341 or pm

Here is a picture on a kouki.

https://scontent-b-lax.xx.fbcdn.net/hphotos-frc3/t1.0-9/1891254_539505086156446_33488001_n.jpg

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[21Nemesis]

I'm interested in one, as I have a 93 w/ a JDM Kouki front, but no support, so it's killing fenders because of the sag. The bumper support will fit, correct? Also, what are the "corner reinforcements" for?

Thanks in advance!

[Sonic Motor]

I'm interested in one, as I have a 93 w/ a JDM Kouki front, but no support, so it's killing fenders because of the sag. The bumper support will fit, correct? Also, what are the "corner reinforcements" for?

Thanks in advance!

These bars replace the factory bumper support. For pop up front ends you will need to get the optional pop up support bar to hold the bumper in the proper position. The corner supports just add more strength in the event of an impact with the corner of the bar. Please send me a PM if you have any other questions or if you would like to place an order. Thanks!

[Sonic Motor]

All orders shipped!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[TheRealSy90]

So if i have a zenki coupe, with a chuki front bumper, but I might switch to an aftermarket/180sx kouki front bumper later on, which one would I need? I don't know why theres a separate zenki/chuki bar when they mount the same.

[Sonic Motor]

So if i have a zenki coupe, with a chuki front bumper, but I might switch to an aftermarket/180sx kouki front bumper later on, which one would I need? I don't know why theres a separate zenki/chuki bar when they mount the same.

You would get the kouki bar with the upper support. It will work with both the kouki bumper and aftermarket bumpers.

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[TheRealSy90]

s13 popup front bar with upper support for aftermarket bumpers, and coupe rear bar with jacking point to 85364.

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All orders shipped!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[WhiteAfrikanz]

These look great! Figured I would post rather than PM this for anyone else that may wonder. How much does the S13 coupe rear bar W/O jacking point weigh? Thanks!

[Sonic Motor]

These look great! Figured I would post rather than PM this for anyone else that may wonder. How much does the S13 coupe rear bar W/O jacking point weigh? Thanks!

The basic bar is about 16lbs.

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All orders shipped!

[Sonic Motor]

All PMs replied!

[Sonic Motor]

All orders shipped!