CANADA - FS: Brembo 6/4 piston brake calipers

[Ka24Power]

I was originally going to install these on my car, but I've decided my R32 GTR calipers are big enough.

I only have the calipers, no pads or rotors. Both rear calipers have all pins/hardware, but the fronts are missing a few pieces. I've sourced the part numbers but I haven't bought replacement hardware.

Calipers are from a 2010 C63 if I recall correctly. Front are 6 piston, rears are 4 piston.

All 4 have varying degrees of peeling clear coat, but other than that they are fine. No seized pistons.

I don't know exactly how much to ask, so I'll start it at $1000 USD + Ship + paypal. I'm in Ontario, Canada but I have no problem shipping to the US.

PM please

http://farm3.staticflickr.com/2840/12826310963_c97f0b5d3a_c.jpg

[eek]

Nice calipers, those things are overkill for any s-chassis on here. Your going to get alot more if you post them on a euro/benz fourm. Try MBWORLD.com and try pawning them off to a reg c-class owner.

[Ka24Power]

Thanks, I know they're a little overkill but I still had dreams of installing them.

First bump for this thread

[RocketBUNNY]

If I wasn't in the middle of buying a set of rims these would have been a pimpin ad on to the s13 but then you gotta add a 2jz so ya got the speed to equal the stop lol. Anyway ill bump your AMG dopeness!!

[Ka24Power]

Last bump. Had some interest but no cash in hand yet

[ehp]

would it even be possible to mount these on a 240?

[BIGnJPN]

I would like these if they are still available... I am in Calgary. :faint:

[Ka24Power]

^ The fronts have a radial mount, it would be pretty easy to have adapters machined to fit the fronts. Rears - I was planning to have an adapter made to fit them, but as stated I decided my r32 brakes are big enough for street driving. Wouldn't be any harder to fab up than a dual rear caliper bracket would be to fab.