1JZ Epic Partout (two motors)

[stunnaben]

Alright, deciding to part ways with my 1JZ motorsets. I'm going to go another route so I figure this would be the best way to do it..... Everything is for sale.

1JZ Healthy Bottom End - $500 (comes with Oil Pump that hasn't been touched

1JZ Spun Bearing Bottom End - $200 (Just block and Crankshaft. Repairable)

1JZ Front Sump Oil Pan Setup - $300

1JZ Rear Sump Oil Pan Setup - $250

1JZ Used Oil Pump - $100

1JZ Assembled Head - $250 (no cam sensors)

1JZ Disassembled Head - $200 (no cam sensors)

1JZ Cam Sensors - $40 each

1JZ Ignitor - $125

1JZ Crank Position Sensor - $50

1JZ Valve Covers - $100 per set

1JZ Soarer ECU - $250

1JZ Soarer Engine Harness - $200

2JZ - GTE Map Sensor - $100

1JZ Turbos - $200 per set (I have 2 complete sets)

1JZ OEM Rods and Pistons set w/ used rings - $150 (set of 6 but one has a spun rod bearing)

1JZ Hydrofan water pump - $50 each

1JZ NST Crankshaft Pulley - $50

1JZ Assembled Intake Manifold with Throttle Body - $200

1JZ Disassembled Intake Manifold with Throttle Body - $175

1JZ Coilpacks - $200 for set

1JZ Coilpack Cover - $100

S14 KYB GR-2 with stock springs - $75

S14 Apexi GT Spec - $200

S14 OEM Exhaust - $80







This is the rest of the parts from the head that I tore down to clean. Everything is labeled and bagged.
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0973_zpsbeac565a.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0973_zpsbeac565a.jpg.html)

Cam Caps for disassembled head, Upper Oil Pan Bolts, and Flex Plate Hardware
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0972_zps79e805a5.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0972_zps79e805a5.jpg.html)

Great Condition Front Sump Upper Pan
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0971_zpsd2211c6e.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0971_zpsd2211c6e.jpg.html)

Decent Condition Oil Pump
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0970_zps78c96aa0.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0970_zps78c96aa0.jpg.html)

Same as above
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0969_zpsbebc0750.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0969_zpsbebc0750.jpg.html)

Oil Pump still attached to good engine block
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0968_zpsf7597f80.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0968_zpsf7597f80.jpg.html)

Top of Cylinders on good engine block
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0967_zps7f6ab61d.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0967_zps7f6ab61d.jpg.html)

Bottom End of good engine block. All bearings meet specs for thrust tolerances. I have these values if necessary.
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0966_zps4e471c63.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0966_zps4e471c63.jpg.html)

Bottom of Rear sump (Had a dent but I beat it back out. It's a steel pan, it can take some abuse.)
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0965_zps01a9b319.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0965_zps01a9b319.jpg.html)

Assembled head but in good condition. No scoring on caps or cams.
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0964_zpsa0df034b.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0964_zpsa0df034b.jpg.html)

[stunnaben]

Rear Sump Upper Oil Pan great condition just dirty. I can clean up if you're picky.... I hate dirty parts myself.

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0963_zpsbebfb63a.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0963_zpsbebfb63a.jpg.html)

This is a picture of #6 rod journal on the crankshaft. A good polish should remove the bearing material that has fused to it. Shouldn't require cutting.

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0962_zps2ab99117.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0962_zps2ab99117.jpg.html)

The bottom of the spun bearing block

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0961_zps7adec196.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0961_zps7adec196.jpg.html)

Bottom of the good block as it sits on the engine stand. Haven't cracked the rod or main bolts.

Look how clean that water/oil heat exchanger is

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0960_zpsb6ea788f.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0960_zpsb6ea788f.jpg.html)

This is the top view of the head I disassembled for cleaning. It will need new valve stem seals that come with engine gasket set

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0959_zps57ba6022.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0959_zps57ba6022.jpg.html)

Combustion Chamber of disassembled head

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0958_zps95ff3afd.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0958_zps95ff3afd.jpg.html)

KYB GR-2 for S14 with OEM springs I believe but don't quote me

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0957_zps43f9c78c.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0957_zps43f9c78c.jpg.html)

Pictures of S14 Apexi GT Spec Exhaust

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0956_zpscae9a73d.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0956_zpscae9a73d.jpg.html)

Dents on bottom of GT Spec Muffler

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0955_zps31d65e6e.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0955_zps31d65e6e.jpg.html)

Scrapes on bottom of GT Spec Piping

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0954_zpscb014b61.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0954_zpscb014b61.jpg.html)

[stunnaben]

Dents on bottom of GT Spec Piping

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0953_zpsaca0dcdd.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0953_zpsaca0dcdd.jpg.html)

Dents on bottom of GT Spec Canister

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0952_zps8f033b26.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0952_zps8f033b26.jpg.html)

Apexi GT Spec for S14 and OEM S14 Exhaust

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0951_zps88ffa1b6.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0951_zps88ffa1b6.jpg.html)

1JZ twins w/ wastegate actuators, OEM Y-pipe, OEM manifolds as well as a 2JZ oem manifold and 1JZ engine mount and bracket

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0950_zps14c26f3a.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0950_zps14c26f3a.jpg.html)

2X Oem 1JZ Hydrofan waterpumps can't buy these in the states

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0949_zps698d1bfb.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0949_zps698d1bfb.jpg.html)

2nd set of OEM turbos with OEM manifolds, OEM Y-pipe, and OEM 02 sensor

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0948_zps0dddfacd.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0948_zps0dddfacd.jpg.html)

1JZ valve cover set number 1

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0947_zps8692ddad.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0947_zps8692ddad.jpg.html)

1JZ camshafts that go to disassembled engine

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0946_zpsd4a3e1d6.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0946_zpsd4a3e1d6.jpg.html)

NST 1jz Crankshaft pulley

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0945_zps68829e68.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0945_zps68829e68.jpg.html)

1JZ ignitor

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0944_zps4702f8d3.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0944_zps4702f8d3.jpg.html)

[stunnaben]

1JZ Intake manifold with throttle body attached and IACV

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0943_zpse284425f.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0943_zpse284425f.jpg.html)

2X 1JZ injector portion of intake manifold, 1JZ Fuel Rail, 2JZ jdm fuel rail, various 1JZ turbo piping, connectors, and OEM bov

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0942_zps1f5e9fd3.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0942_zps1f5e9fd3.jpg.html)

1JZ Coilpacks

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0941_zpsf0179ca2.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0941_zpsf0179ca2.jpg.html)

1JZ pistons, rods, and bearings from spun bearing 1JZ engine

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0940_zps3171fc8b.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0940_zps3171fc8b.jpg.html)

1JZ Soarer ECU AT

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0939_zpseaf75c0c.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0939_zpseaf75c0c.jpg.html)

1JZ Soarer ECU AT

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0938_zps4e2e26c6.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0938_zps4e2e26c6.jpg.html)

1JZ Valve Covers and Camshafts from Assembled head
http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0937_zpsd0187e59.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0937_zpsd0187e59.jpg.html)

Semi-disassembled intake manifold w/ throttle body and camshaft pulleys

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0936_zps0a4e8eaa.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0936_zps0a4e8eaa.jpg.html)

Various 1JZ turbo tubing and coolant tubing

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0935_zpsf01ee555.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0935_zpsf01ee555.jpg.html)

1JZ Coilpack Cover

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0934_zps2d2bdd56.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0934_zps2d2bdd56.jpg.html)

[stunnaben]

1JZ Front Sump Pickup and Splash Shield

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0933_zps5b0d8cd7.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0933_zps5b0d8cd7.jpg.html)

1JZ Timing Belt Retainer Plate goes behind Camshaft Pullies

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0932_zps5569d070.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0932_zps5569d070.jpg.html)

1JZ Timing Belt Cover goes over behind Crankshaft Dampener

http://i1276.photobucket.com/albums/y468/bmintz11/IMG_0931_zpsf3a76898.jpg (http://s1276.photobucket.com/user/bmintz11/media/IMG_0931_zpsf3a76898.jpg.html)

[rune1241]

How much for the oem bov?

[Contract_Killer]

pm me your price for the good bottom end and good parts too go on it... basically a good motor that just need assembeled and ecu

[stunnaben]

I messaged you both. Thanks for interest b

[PolarBear1JZ]

How much for a 1jz starter

[stunnaben]

No starter.

[EthanR]

Do you have an idle air control valve? I have a JZX90 1J if that helps at all, not sure which are compatible.

[stunnaben]

I have two IACVs.

[stunnaben]

Bump to the top. I still have everything. A lot of interest in the good bottom end and head. I would love to get rid of everything in one lump sum if possible. Will make someone a great deal going this route. Interested in a complete S14/S15 sr swap or an LS swap. Other parts I'm interested in are JDM Kouki bumpers, OEM Kouki rear bumper add ons, Origin Stylish Kouki body kit, or potentially quality KA-t parts such as forged rotating assemblies, new ARP head/main studs, quality manifolds, turbos, etc.

[stunnaben]

Let's get this stuff gone so I can party hardy.

[sr84]

Pm me a price for the good motor and good parts

[stunnaben]

Not a Problem. PM en route.

[stunnaben]

Bump up ladies. I'm keeping the good block, the disassembled head, and an intake manifold.

[Night drifte89]

Good stuff. Bump glws

[findmea240]

Will buy head asap. Please text me 5707680806

[stunnaben]

Will buy head asap. Please text me 5707680806

Text sent. Let me know.

[stunnaben]

Assembled cylinder head sold.

[erik324]

do still have an iacv?

[XxS13LifexX]

Is the intake manifold your not using vvti or non? Does this one include a throttle body and iacv?

[B-Rock]

Any r154s for sale?