S14 SR20DET Motor Partout

[hobbs]

Well the previous owner had a bad tune and ended up toasting the motor so it's time for a partout and get a new motorset. Block, head and turbo setup are not for sale. Items are located in chicago IL, prices do NOT include shipping. I'll have some pictures for you guys this weekend.


Starting from the bottom up:
- GReddy oil pan for S14/S15 - 300.00
- OEM upper oil pan - 30.00
- Uncut SR20 crankshaft - 75.00
- Eagle rods - used - 230.00
- Wiseco 86.5 pistons - slight damage from knock - 75.00
- HKS Step 2 springs and retainers - 250.00
- HKS 264/272 camshafts - 225.00
- SR20 Rockerarms - 80.00/set or 20.00/each
- SR20 Crank pulley - 40.00
- S14 Front cover/oil pump - 65.00
- 5 Speed transmission plate - 25.00
- Water pump - 25.00
- Intake manifold upper/lower - 75.00
- Throttle body - 45.00
- Knock sensor - 25.00
- Oil pickup - 35.00
- Coilpacks - 110.00
- Valve cover - SOLD
- Water outlet - 40.00
- Coilpacks - 110.00
- CAS - 110.00
- Oil filter housing - 25.00
- Under intake coolant hard pipes - 30.00
- 'WC' ECU - 125.00
- VCT Cam gear - 110.00
- Exhaust cam gear - 30.00

[kenzo395]

i might be interested in the pistons and rods can you send me pics please or i might just buy the whole bottom end.

ill need it shipped (29680)

[ryan15]

I'll buy the crank pulley if there are no chips on it.

[se7en_]

i'm interested in the pistons and rods as well. post pics of the damage on the pistons....also, did any bearings spin in the rods? do the piston rings pin freely?

[hobbs]

Motor ran before I pulled it apart, as I purchased it already built I was going to go ahead and have the motor checked out by my machine shop while the car was down for winter. Here's what I found when I popped it open:

http://i834.photobucket.com/albums/zz265/eskhobbs/20131204_223836_RichtoneHDR_zpsktcozgnp.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/20131204_223500_RichtoneHDR_zpsd89883ba.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/20131204_223811_RichtoneHDR_zpstn1rgiop.jpg

[ryan15]

I sent a PM a few days ago about that crank pullry if it's still available...

[TheRealSy90]

Honestly that damage is not even that bad. If it wasn't for having rod knock I would have cleaned it up and thrown on a cosworth gasket and arp's and just beat the shit out of it. After re tuning of course.


Sent from my iPhone using Tapatalk

[se7en_]

If there is rod knock, then the eagle rods will be junk...

[hobbs]

Honestly that damage is not even that bad. If it wasn't for having rod knock I would have cleaned it up and thrown on a cosworth gasket and arp's and just beat the shit out of it. After re tuning of course.


Sent from my iPhone using Tapatalk

If there is rod knock, then the eagle rods will be junk...

When did I ever say rod knock? I said the pistons were slightly damaged due to knock, one could assume I was talking about pre ignition knock. Again, the motor did not have rod knock. Jesus....

[se7en_]

Honestly that damage is not even that bad. If it wasn't for having rod knock I would have cleaned it up and thrown on a cosworth gasket and arp's and just beat the shit out of it. After re tuning of course.


Sent from my iPhone using Tapatalk



It says it right here. maybe typo?

[se7en_]

Hold on..different person? Previous owner maybe?

[hobbs]

Hold on..different person? Previous owner maybe?

Not a previous owner as I bought the car from the guy who build the car, just someone who is assuming knock means rod knock and not preignition knock.

[se7en_]

I gotcha. Then I might be interested in the rods...no hard feelers?

[se7en_]

Or both rods and pistons if they don't have any pinched ringlands

[hobbs]

Bump to the top!

[beems240sx]

Bump for a legit seller and cool dude. I personally saw this motor running when we picked up the car. It honestly ran amazing. I never would of guessed it had any issues

[RalliartRsX]

Wow. Hobbs, you actually bought the Car this engine came in from underneath me as I had a wedding that weekend. Had truck/trailer all lined up too.

Gentlemen had no idea it had this issue as he said he would drive it, it would overheat, then he would pull over and it could be fine. Thought it was a thermostat but had not idea the issues ran this deep..........

Plans for the vehicle and did you keep your Red S13 (Damion's?)?

[hobbs]

Wow. Hobbs, you actually bought the Car this engine came in from underneath me as I had a wedding that weekend. Had truck/trailer all lined up too.

Gentlemen had no idea it had this issue as he said he would drive it, it would overheat, then he would pull over and it could be fine. Thought it was a thermostat but had not idea the issues ran this deep..........

Plans for the vehicle and did you keep your Red S13 (Damion's?)?

Kurt is a good guy and he gave me a great price on the car once the overheating issue popped up so I don't think he was trying to hide anything from me and I knew going into the deal the motor had issues, just assumed it was because the car was low on coolant. Only really knew what was up once I started to take the thing apart. The overheating was caused by the bad headgasket which was toasted due to the detonation, the tune seemed to be pretty rich so it may have been bad gas. He didn't mention to me that someone else was trying to pick up the car when I drove out to check it out. Sorry!

I sold the red hatch about 3 months ago, went back over to nocal.

[RalliartRsX]

Kurt is a good guy and he gave me a great price on the car once the overheating issue popped up so I don't think he was trying to hide anything from me and I knew going into the deal the motor had issues, just assumed it was because the car was low on coolant. Only really knew what was up once I started to take the thing apart. The overheating was caused by the bad headgasket which was toasted due to the detonation, the tune seemed to be pretty rich so it may have been bad gas. He didn't mention to me that someone else was trying to pick up the car when I drove out to check it out. Sorry!

I sold the red hatch about 3 months ago, went back over to nocal.

Ohhh, I wasn't insinuating Kurt was a bad guy.........Just that you beat me to the punch by only a day or two :). Sorry if my post seemed defamatory towards Kurt! He was one of the much more well put together individuals that I have met recently!

[hobbs]

Ohhh, I wasn't insinuating Kurt was a bad guy.........Just that you beat me to the punch by only a day or two :). Sorry if my post seemed defamatory towards Kurt! He was one of the much more well put together individuals that I have met recently!

I didn't mean it like that, so no worries. Looks like I saved you some headache then :)

[jerry_beans]

Bump for you I pmed you!

[Teggin]

Payment sent for VCT intake cam