PDA

View Full Version : Z32 brake hard line and fitting sizes?????


slidewaysII
12-16-2013, 12:34 AM
Hello zilvian's,

I'm having a lot of trouble finding out what size brake lines and fittings are right for z32 calipers. I have a dual z32 caliper set up and a PBM hydro brake with a wilwood MC and reservoir. The MC had a single 1/8 NPT fitting. Does that mean I use 1/8" hard lines? I plan to T it off around where the stock ebrake cables run though to the underside of the chassis. Run more hard line to the rear wheel well. From there run aftermarket SS rear lines to the calipers. Can anybody help me out? Much appreciated!

Merry Christmas!

12-16-2013, 05:40 AM
The threads are M10x1.0, the fronts have an inverted flare fitting, the rears are banjo, standard nissan hardline is 5mm (3/16")