Crank Position Sensor (CEL)

[USAFs13]

I recently had a 5 speed swap done on my s14 and during the process the sensor on the bellhousing was broken. Of course at this time the CEL was on (how we found out what it was) and the part has since been replaced, but my problem is now the CEL wont go away.

Tried clearing the ecu and then unhooked the battery for awhile and still the same thing. Car drives fine with no problems at all but the ecu is still throwing the same code as before.

[JBPUSA]

if you replaced the sensor and you're still getting the code, check the connection

[fliprayzin240sx]

If you dont have to worry about inspection, just take the bulb out. Thats what I did on my first S14 since the damn code wouldnt go away after swapping the clutch. Doesnt affect the drivability of the car nor does it put the car in limp mode.