CXRacing 2JZ-GTE Swap Kit for 240SX S13/S14, Motor/Trans Mounts, Exhaust, Intercooler

[cxracing]

This is our new swap kit for 2JZ-GTE/R154 swap into 240SX S13/S14 chassis. we have developed many different parts for this swap to meet different needs:

1. Engine Mounts
2. R154 Mounts
3. Stock Twin Turbo downpipe and matching complete exhaust system
4. Stock Twin Turbo intercooler kit
5. Single turbo upgrade manifold and downpipe, and matching complete exhaust system
6. Single turbo upgrade intercooler kit
7. Radiator kit

for detailed product offering, you can check out our website:

CXRacing.com: S13 2JZ-GTE Swap
(http://www.cxracing.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=CXR&Category_Code=240SX2JZGTE)
http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3191_zpsf755e23e.jpg

Here are some pictures of the products installed in the car and off the car:

Motor Mount and Transmission Mount:

Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
Adjustable Slotted Bolt Holes
Polyurethane Bushing Mounts


http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_2785_zps6326ba03.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_2778_zps72857374.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_2773_zpscfbe95b2.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_2784_zps67cfbc3f.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3395_zps046e8731.jpg

There are two different R154 mounts that we knew, the bolt pattern are different, we will post more pictures later.

[cxracing]

Intercooler Kit for Stock Turbo:

Intercooler:
- Core Size: 24"x12'x3"
- Overall Size: 31"x12"x3"
- 3" Inlet & Outlet
- 3" core, Bar and Plate Design

Piping Kit:
- Mandrel Bent Aluminum Pipe
- 3" Cold Side Pipes
- 2.5" Hot Side Pipes
- Comes with BOV, Silicon Hoses, and T-Bolt Clamps
- Air Intake Pipe with Air Temp Sensor Flange.

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3367_zpsac237f32.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3363_zpsf62eaf2d.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3362_zpsb8f9c804.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3361_zps07b55b58.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3333_zps9d0a68e3.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3331_zpsdc5b2011.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3370_zpsea462c5a.jpg

[cxracing]

Stock Turbo Donwpipe /Exhaust (Complete Turbo Back system), Toyota motors have exhaust on the right hand side, while 240SX has it on the left hand side, so 1j and 2j swap needs to re-do the exhaust completely. there are many 240sx owners already changed their exhaust to aftermarket ones. we have taken this into consideration and developed exhaust system that you can keep what you have. we make a new mid pipe the flips to the right hand side the chassis, so that you can keep the last piece of the exhaust (the one piece with muffler) if you want.

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3381_zps6475b38c.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3376_zpsa7d75360.jpg


http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3373_zps03af5521.jpg

[BoostedJay]

This looks quality, I've been debating building a 2j S14 after I finish my 2j FD. You guys this looks like a fantastic kit! You make a good kit for an FD I'm sure plenty of people would flock no doubt.

[cxracing]

Single Turbo Upgrade Manifold, Downpipe and Intercooler Kit:

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3462_zps82fd7618.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3465_zpsda461ec5.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3487_zpse6a2864f.jpg

http://i1092.photobucket.com/albums/i414/cxracing88/S13%202JZGTE/IMG_3488_zpsf5af02e3.jpg

[Black R]

What's the p/n on the radiator?

[cxracing]

What's the p/n on the radiator?

we use the same radiator for the SR20, which has the top outlet on the left side. part # is

RAD-S14-12JZ-2FAN-KIT-BLS (http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=RAD-S14-12JZ-2FAN-KIT-BLS&Category_Code=240SX2JZGTE). (http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=RAD-S14-12JZ-2FAN-KIT-BLS&Category_Code=240SX2JZGTE)

we offer 2 row or 3 row radiator, with 3 row, the space is limit, closer to the engine where the radiator hose and intercooler hose are against each other a little bit, but not a big deal.

if you already have a SR radiator, we offer just the radiator pipe as well.

PIP-RAD-12JZ-S134-BLS (http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=PIP-RAD-12JZ-S134-BLS&Category_Code=240SX2JZGTE)

[MegaFreshCheese]

Do you guys make a engine mount kit for a 2jzge with possibly a w58 tranny for an s13? I couldn't find it on your website. Pm me if you can.

[cxracing]

Do you guys make a engine mount kit for a 2jzge with possibly a w58 tranny for an s13? I couldn't find it on your website. Pm me if you can.

Sorry, we don't have a mount kit for w58

[MegaFreshCheese]

How much for just the engine mount kit on a 2jzge without the tranny mount

[JF_OverBoosted]

The temptation of just going the 2J route....

[cxracing]

How much for just the engine mount kit on a 2jzge without the tranny mount

$275 just for the engine mounts.

[BiG MiKE86]

Please tell me you guys offer a throttle cable bracket for the S13?

Also what cable are you guys running on that S13? DOHC SOHC?

[cxracing]

Please tell me you guys offer a throttle cable bracket for the S13?

Also what cable are you guys running on that S13? DOHC SOHC?

Sorry, we don't.

[BiG MiKE86]

Sorry, we don't.

What do you guys do for your own cars? Got any close ups of your brackets?

I bought that radiator pipe you guys make - I gotta say it does look pretty nice and fits well!

http://img.tapatalk.com/d/13/11/01/usegaha5.jpg

[cxracing]

What do you guys do for your own cars? Got any close ups of your brackets?

I bought that radiator pipe you guys make - I gotta say it does look pretty nice and fits well!

http://img.tapatalk.com/d/13/11/01/usegaha5.jpg

Nice!!

for the TB bracket, we don't have it yet, but we will develop one later and offer it. probably another 2-3 months we will have it.

[HayabusaKLR]

I see that everyone goes with the R154 transmission, but do you know if the A340E fits in a S14 and do you guys plan on offering this mount in the future?

[cxracing]

I see that everyone goes with the R154 transmission, but do you know if the A340E fits in a S14 and do you guys plan on offering this mount in the future?

no we don't.

[BiG MiKE86]

will you guys sell the single turbo inter-cooler piping separate? I have a Greddy VSPL i want to use

[cxracing]

will you guys sell the single turbo inter-cooler piping separate? I have a Greddy VSPL i want to use


yes, we do, give us a call, 626-575-3288, during business hr, 9:30-5:30 PST, M-F.

[Silviacraze05jr]

@cx racing-make more parts for us, misc stuff like mike said throttle cable brackets for s13/s15. to name a few, ac delete brackets for ppl not wanting ac on their cars, clutch line kit or even ps lines, custom coilpack covers, pulley kit, single turbo lines just some of the parts we need.

[cxracing]

@cx racing-make more parts for us, misc stuff like mike said throttle cable brackets for s13/s15. to name a few, ac delete brackets for ppl not wanting ac on their cars, clutch line kit or even ps lines, custom coilpack covers, pulley kit, single turbo lines just some of the parts we need.


Well noted!! will do.

[ATLspeed]

- Throttle cable + Bracket for Stock IM or aftermarket IM (biggest problem with the swap, you can make the stock line work but it looks terrible)
- s13/s14 2jz AC Lines (many just ditch AC but I plan to keep AC in my 2j vert)

[BiG MiKE86]

Throttle cable brackets would sell like water in HELL

ill be calling you guys today about the piping - any chance you could just shoot me a guesstimate on what the cost would be for the piping only? Top mount 2jz S13

[di-devol]

Interested in your top mount DP and crossover mid pipe. Would you offer these pieces separately without the muffler? I have a 1j, and need a DP and mid pipe only, 1j/2j seem really close to each other.

[cxracing]

we are working on designing the throttle cable bracket and A/C delete bracket. will have products soon.

[cxracing]

Interested in your top mount DP and crossover mid pipe. Would you offer these pieces separately without the muffler? I have a 1j, and need a DP and mid pipe only, 1j/2j seem really close to each other.

we have 1JZ downpipe, both VVTI and none VVTI

cxracing.com: 1JZ-GTE (http://www.cxracing.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=CXR&Category_Code=240SX1jZ)

[BiG MiKE86]

yes, we do, give us a call, 626-575-3288, during business hr, 9:30-5:30 PST, M-F.

Trying to call you guys getting nothing but a busy signal. Could you just shoot me a pm or post in here what the cost of the piping would be?

[cxracing]

Trying to call you guys getting nothing but a busy signal. Could you just shoot me a pm or post in here what the cost of the piping would be?


this is the link to the 2JZ Top mount turbo kit for S13:

cxracing.com: CXRacing 2JZGTE 2JZ-GTE 2JZ Swap 240SX S13 S14 Intercooler Piping Radiator HardPipe Kit Single Turbo (http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=KIT-2JZGTE-ST-S134-IC0022-RAD-PIPE&Category_Code=240SX2JZGTE)

this is all the other parts for the 2JZ/S13 swap:

cxracing.com: 2JZ-GTE (http://www.cxracing.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=CXR&Category_Code=240SX2JZGTE)