AJZax
11-04-2013, 01:55 PM
DECEMBER 27th!
Port Orchard, WA!
@ Puget Sound Auto Repair
Tuner: Owner/recognized&respected tuner from RS-Enthalpy in Florida!
RS-Enthalpy ECU features
- optional 2 step launch control
- any fuel
- more power
- faster response (throttle and turbo spool)
- optimized rev cuts for safer burn condition on rev limiter
- optional multi-tune ecu (so you can switch fuel or setups at flick of switch)
- With N62 MAF setup, good to 600whp of tunability without custom MAF housing.
-$400 + core ECU + $80 dyno hook-up (dyno-shop charge)
Can tune:
Anything Nissan with an RS-Enthalpy ECU
SR
VQ
KA
VG
RB
CA
Can tune:
PowerFC
AEM
Haltech
Vipec
So LSx, 2JZ doesn't matter, if it has management then it can be tuned.
$400 for full standalone tune, $80 for dynohook up.
Martin will be tuning, if you don't know who that is, look him up. He gets flown all over the place to do dynotuning for groups of people. How many people do you know get flown all over the states to tune? He even flies to Europe to tune cars sometimes.
My car made 440whp at 15psi on SR (E85).
Next session I'm shooting for 550whp. (Maxed out fuel system at 486 at 4600rpms) I'm on RS-Enthalpy ECU with N62 MAF.
N62 MAF can make 600whp. As long as you setup your suction kit correctly.
Stock SR (stock t25, 370cc, etc.) made 260whp.
NA KA (my gf's) made 160whp (exhaust and cone filter)
Most KADE (NA) make 150-155whp.
If you have any questions message me on facebook.
facebook.com/ajdrift
You can check out my website too www.ajdrift.com
Port Orchard, WA!
@ Puget Sound Auto Repair
Tuner: Owner/recognized&respected tuner from RS-Enthalpy in Florida!
RS-Enthalpy ECU features
- optional 2 step launch control
- any fuel
- more power
- faster response (throttle and turbo spool)
- optimized rev cuts for safer burn condition on rev limiter
- optional multi-tune ecu (so you can switch fuel or setups at flick of switch)
- With N62 MAF setup, good to 600whp of tunability without custom MAF housing.
-$400 + core ECU + $80 dyno hook-up (dyno-shop charge)
Can tune:
Anything Nissan with an RS-Enthalpy ECU
SR
VQ
KA
VG
RB
CA
Can tune:
PowerFC
AEM
Haltech
Vipec
So LSx, 2JZ doesn't matter, if it has management then it can be tuned.
$400 for full standalone tune, $80 for dynohook up.
Martin will be tuning, if you don't know who that is, look him up. He gets flown all over the place to do dynotuning for groups of people. How many people do you know get flown all over the states to tune? He even flies to Europe to tune cars sometimes.
My car made 440whp at 15psi on SR (E85).
Next session I'm shooting for 550whp. (Maxed out fuel system at 486 at 4600rpms) I'm on RS-Enthalpy ECU with N62 MAF.
N62 MAF can make 600whp. As long as you setup your suction kit correctly.
Stock SR (stock t25, 370cc, etc.) made 260whp.
NA KA (my gf's) made 160whp (exhaust and cone filter)
Most KADE (NA) make 150-155whp.
If you have any questions message me on facebook.
facebook.com/ajdrift
You can check out my website too www.ajdrift.com