Advan RGII 18x9/10 +22 5x114.3

[mr2mkii]

Located in MONTREAL, Quebec, Canada (not california)

Advan Rg2 wheels for sale!!!

Some scratches, but not bent. Those are really head turners. One of the most classic, light & solid wheels on the market

SOLD

18x9 +22 avant (17.9 lbs)
18x10 +25 rear (18.5 lbs)

Bolt pattern: 5x114.3

Big Brake Kit friendly (even with the Wilwood 4 pistons I still have around 2 inches between lettering of the callipers and the rear of the spokes)

Just give your zip code and I will get a shipping quote for you

I will need a small deposit from the buyer (not refundable), to have the tires removed and make sure buyer is serious.

Can also fit on multiple sports cars like Nissan 240sx converted to 5 bolts, Nissan 300zx, Lexus is300/is250/is350, Infinity g35, Nissan 350z, Nissan skyline, Acura NSX, Mazda Rx-7, Toyota Supra/Mr2, etc

I also include a set of 4 original Advan Racing center caps with the wheels (retail at 250$ for the set)
http://i9.photobucket.com/albums/a75/Paseo4Life/Beams%20Turbo%20engine%20project/Mr2%202010%20build%20up/Advancentercap_zps66fd1835.jpg

Close-up with center caps installed
http://i9.photobucket.com/albums/a75/Paseo4Life/Stuff%20for%20sale/IMG_20140201_113342_120_zpsedc1e75d.jpg
Close-up 1 wheel of each
http://i9.photobucket.com/albums/a75/Paseo4Life/Stuff%20for%20sale/IMG_20140111_085258_349_zps8f6dba74.jpg
Close-up 1 front wheel (18x9 +22)
http://i9.photobucket.com/albums/a75/Paseo4Life/Stuff%20for%20sale/IMG_20140111_085357_374_zps1f1c508f.jpg
Close-up 1 rear wheel (18x10 +25)
http://i9.photobucket.com/albums/a75/Paseo4Life/Stuff%20for%20sale/IMG_20140111_085459_934_zps264f8331.jpg
Example on my mr2
http://i9.photobucket.com/albums/a75/Paseo4Life/Beams%20Turbo%20engine%20project/Mr2%202010%20build%20up/DSCN1501.jpg
http://i9.photobucket.com/albums/a75/Paseo4Life/Paintjob%20mr2/485691_10150973443543487_552088486_11975358_207642 8258_n.jpg

More pictures available upon request

To reach me: [email protected]

Gabriel

[sw20>>s14]

God damn that's a hard ass SW. Props.

[mr2mkii]

God damn that's a hard ass SW. Props.

thanks buddy, try to do my best to make it look good. Time for change now.

[K0uki_M0nster]

Free bump for a fellow mr2 owner!!!
Your sw dub is wet as fuk !!!

[mr2mkii]

Free bump for a fellow mr2 owner!!!
Your sw dub is wet as fuk !!!

thanks kouki, all I can say is that I built something very personnal and unique. Especially with the engine I'm using in it.

Just need to change a little bit the look for next year with a new set of wheels. I rarely use the same wheels more then 1-2 years. I like to change the style of my rides

[Nikebot23]

bumppppp nice set

[mr2mkii]

bumppppp nice set

Thanks buddy

These are some of the wheels I would be interested in for a trade:

with lips: Blitz Type 03, work equips, Work emotion xd9, etc

Also interested in very concave wheels like 5zigen FN01R-C or same style

I am open to all kind of trades just ask and the worst thing you can get is a ''No thanks''

[Tomeis15]

Thanks buddy

These are some of the wheels I would be interested in for a trade:

with lips: Blitz Type 03, work equips, Work emotion xd9, etc

Also interested in very concave wheels like 5zigen FN01R-C or same style

I am open to all kind of trades just ask and the worst thing you can get is a ''No thanks''

Sick ass wheels bro u daily ur mr2 ?

[mr2mkii]

Sick ass wheels bro u daily ur mr2 ?

thanks buddy, I use it regularly in the street. Can't see I daily it since I have an other car and also a company truck that I use each day for work.

However I can say that YES I use it in the street and also on the track when I am able to :2f2f:.

Still unsure if it's worth it to change them or not. If I don't sell or don't find a decent trade I might just have them powdercoated white. Always liked that color especially on a concave wheel

example: http://static.wheelflip.com/cache%2Fphotos%2F1995Zf392bd212d%2Flisting_163_1_l arge.jpg

[EatRice]

if they cleared my 6 piston calipers i would be in love-

my rpf 18x9.5" +15 barley clear - so i guess these wouldnt clear :(

glws bumb

[mr2mkii]

if they cleared my 6 piston calipers i would be in love-

my rpf 18x9.5" +15 barley clear - so i guess these wouldnt clear :(

glws bumb

I don't have 6 pistons calliper so it's hard to tell but I am using the wilwood 4 pistons callipers and I have lots of room. It always depend on the way the wheels are made, not really anything to do about offset.

I can take a look for you to see how much space I still have between my 4 pistons callipers and the mag itself and tell you? I don't think 6 pistons are THAT big compare to 4

[mr2mkii]

if they cleared my 6 piston calipers i would be in love-

my rpf 18x9.5" +15 barley clear - so i guess these wouldnt clear :(

glws bumb


I don't know how your rpf1 are made but with my 4 pistons callipers on my mr2 I still have an other 1.5 to 2'' left between the calliper and the rear of the spokes.

I have picture to prove this

I'm pretty sure this would clear most of the BBK available on the market. The spokes really goes to the extremity of the face

[mr2mkii]

new price at 1950$ canadian

[beeboyee]

I'd trade my fn01s but your to far GLWS

[AK_S2K]

Trade for a set of 3 wheels Brand new in the box? The 4th got lost in shipping :/ they are wedssport sa-55m in the MGM color have a single 18x8 +45 and a pair of 18x10 +18. rears are CONCAVE AF!

cash on my side of course.

[mr2mkii]

Trade for a set of 3 wheels Brand new in the box? The 4th got lost in shipping :/ they are wedssport sa-55m in the MGM color have a single 18x8 +45 and a pair of 18x10 +18. rears are CONCAVE AF!

cash on my side of course.

thanks for the offer but I already said no to the same set of wheels from an other member. Not my style and especially with that kind of offset on your 8's

good luck with your sale

Gabriel

[mr2mkii]

1st bump

Couple of request for additionnal pictures but no serious offers up to now

[mr2mkii]

Would be really interested in a trade for a set of

Work VS-SS in same size or little more aggressive with nice lips


would also consider trades for:

work meister s2r
volk gt-s

I can also add a little bit of money on top if needed for a trade depending on the wheel shape

[AVmagneticZ]

possibly interested in these. are you sure the rears are +22? just cause im on the website checking sizing and i dont see +22 any pics of the sticker. they arent +15 are they? cause that would be sweet lol

[mr2mkii]

possibly interested in these. are you sure the rears are +22? just cause im on the website checking sizing and i dont see +22 any pics of the sticker. they arent +15 are they? cause that would be sweet lol

I still have the original Advan sticker that were inside the wheels when I got them. However they were on their way to fall off so I removed them and kept them with all the bills of my car. They only tell the bolt pattern and the name of the guy who inspected the wheels at the factory. Not the width and the offset.

Sent you a PM

[BossHogg]

check the inside of the wheel itself. My RG (originals) are inside.

18x9.5 +12
http://i.imgur.com/UVsZSrF.jpg

[mr2mkii]

rear offset has been corrected to +25 instead of +22

Update January 14th 2014

Now including a set of Original Advan Racing center caps (worth 250$) in the sale to smoothen the deal even more (see first post for picture)

[SourSamo]

Doubt you want to split?

[lsvtec]

would buy these in a second if in socal, glws

[mr2mkii]

Doubt you want to split?

Not at this moment except if I get interest in both pairs at same time

[mr2mkii]

would buy these in a second if in socal, glws

yeah would be easier to live in that area but it's not the case so have to deal with it.


However I ship internationally and I am open to reasonnable offers if it can helps to close the deal.

[mr2mkii]

Back in 2010 or 2011 I sold my previous Blitz Type 03 freshly powedercoated/polished to a guy in Socal. They were exactly the same specs except they were 17''

however each wheel was like 6-7 lbs heavier then my Rg2. The package arrived safe in Socal and the guy was extremely happy.

Previous sell: http://zilvia.net/f/wheels-tires/358890-fs-ft-blitz-type-03-17x9-22-17x10-22-5x114-3-gold-set-4-no-tires.html

Jared0934 is the one who finally bought them and I never heard any bad comment from him. Yes shipping cost more when coming from Canada and can also add some fees because of customs but I guarantee that all my package are correctly packed and insured at full amount.

[KOUKIboy]

Daaamn those are beautiful!!!! GLWS.... Your MR2 is Boss!!!!

[mr2mkii]

Daaamn those are beautiful!!!! GLWS.... Your MR2 is Boss!!!!

Thanks Kouki. I like to make things a little different. Got my eyes on a set of wheels at this moment so would like to sell my Rg2. However i'm still open to trades. It's not because I got my eyes on a specific set that I can't find something else really interesting.

[AVmagneticZ]

so strapped for cash right now with my drift build, if these are still available come end of February i would probs take em. lol.

[mr2mkii]

so strapped for cash right now with my drift build, if these are still available come end of February i would probs take em. lol.

No problem, I'll keep your name on my list. I don't have a rush in selling them however if they don't sell by march or beginning of april I'll probably keep them.

I have someone local considering buying them but as for now I don't have money in hands so they are still available.

I also ship internationally as long as buyer pays for shipping.

[mr2mkii]

1950$ + shipping

[SWgeezy]

hi mr2mkii clean sw20!! have you seen j0hne's VS-SS for sale? contact him for more info. he is over on the east coast and willing to sell. I dont think he is up for a trade though.

Would be really interested in a trade for a set of

Work VS-SS in same size or little more aggressive with nice lips


would also consider trades for:

work meister s2r
volk gt-s

I can also add a little bit of money on top if needed for a trade depending on the wheel shape

[mr2mkii]

hi mr2mkii clean sw20!! have you seen j0hne's VS-SS for sale? contact him for more info. he is over on the east coast and willing to sell. I dont think he is up for a trade though.

Yeah I've seen his vs-ss for sale. I already got in touch with him but told him I was waiting to sell my own wheels before taking some of his time.

Also right now it's a bit more then what I'm looking to spend. However if I sell my wheels I will be able to talk more seriously about the price with j0hne

[mr2mkii]

still up for grabs

[lsvtec]

Trade for my bbs lm
18x10 offset 20, reverse mount will lower offset to 5

[mr2mkii]

Trade for my bbs lm
18x10 offset 20, reverse mount will lower offset to 5

sorry not a big fan of multispokes/eurostyle wheels

[90S13dude]

Still available?

[mr2mkii]

Still available?

yes still available. Check PM

[mr2mkii]

Come on guys.... be serious.

Don't ask me if they are still available, then ask for a shipping quote, to finally tell me it's out of your price range without tires.

The only difference between my set of wheels and any other here is that shipping will be around 100-150$ more then a set already in the US.

if you see a set without tires in the US will you show interest to the seller and finally arrive 2-3 days later telling that it's more then your budget??

There is an other set of RG2 available at this moment in the US. It's the exact same specs, his tires are toasted, he doesn't have center caps (worth 250$), and he's asking more then I am.

This is the last BUMP before I retire my thread. After that I will only try to sell locally or maybe trade locally.

Last chance for a serious buyer to show up

[mr2mkii]

Decided to continue the sell a little longer. Anyway I am not close to taking the car out of storage.

1925$ + shipping

[mr2mkii]

New pictures, new description and new price

Now at 1900$ + shipping

[mr2mkii]

I am still interested in trades but would prefer something with lower value + cash

Now adding the Work Emotion Cr-Kai to the list of trades I am interested in

Cr-Kai regular in 18x8.5 +32 (semi-concave face)
18x9.5 +12 +20 or worst case +30 (deep concave face)

Cr-Kai Ultimate Kiwami in 18x8.5 +30 (semi-concave face)
18x8.5 +12 +20 or worst case +30 (deep concave face)

favorite color would be white but interested in other colors too

[59bhp]

i will take the 10j set of two if the other person wants the fronts :)

[mr2mkii]

i will take the 10j set of two if the other person wants the fronts :)

If I get interest for both sets I can split. However I need payment of BOTH buyers before having the tires removed and officially selling them

1050$ + shipping for the rears
850$ + shipping for the fronts

[59bhp]

Yeah that's fine with me :) I'll take the 10j's

Sent from my HTC One using Tapatalk

[mr2mkii]

Yeah that's fine with me :) I'll take the 10j's

Sent from my HTC One using Tapatalk

perfect I keep your interest in mind. Will try to see if I can find a buyer for the front ones

Anyone interested in buying the front ones (18x9 +22) for 850$ + shipping???

[mr2mkii]

1875$ + shipping

[mr2mkii]

1850$ + shipping

Serious buyers please!!!!

[mr2mkii]

still available

[mr2mkii]

1825$ + shipping!!!!!