ToddDaniels
10-17-2013, 07:49 AM
ITEM: 1993 nissan 240sx coupe
PRICE: 12,000
SHIPPING: none
CONTACT INFORMATION : Todd Daniels 906-440-9930(text preferred)
LOCATION: Houston Texas
PAYMENT OPTIONS: Cash, Paypal, wire transfers
SALE TYPE: Vehicle
Build thread link! =
2jz s13 coupe build - Houston240sx.com Forums (http://www.houston240sx.com/showthread.php?t=68246)
-----------------
DESCRIPTION:
Well unfortunatly here it is. i have been debating making this thread for a while. but here goes.
For sale, my coupe, everything on this car has been purchased as a new product. much thanks to Autrey at DWS. But seeing as i have even one day off a week i can no longer take the time to finish this or have the money to finish it. Storage units add up after time lol. Any questions please call or text me, in addition to posting here(so others may see).
i am also in no rush to sell.
And also not looking to part out.
I dont have the time to take things off.
ive put close to 22,000 into this project and i am taking a large hit for the price i am selling it for. I just cannot afford it and no longer have time to finish it. If it comes down to it ill just keep it and let it sit for a few years.
Thanks for looking!
and now to the good stuff!
VIN:JN1MS34P4PW306973
Most complete list of mods
Engine
2jzgte -aristo
BC adjustable cam gears
OEM timing belt
OEM timing tensioner
OEM supra water pump
OEM thermostat
Driftmotion pulley set
Cusco solid engine mounts
Driftmotion engine/trans brackets
Oil cooler and lines(black)
Greddy/grex thermostatic oil adapter
Sr20 mishimoto radiator
Driftmotion intercooler
Ebay downpipe for aristo
New full gasket set
Headgasket+arp studs(not installed)
Engine management
Stock aristo ecu and wire harness(un touched or cut)
Fuel setup
6AN fuel lines from tank
walbro 416 e85 compatible pump(400lph)
Aeromotive FPR kit for aristo
Body
Silvia front 30mm over fenders(d1)
Carbon d1 silvia hood
Aerocatch hood pins/latches
Sideskirts(bomex?)
Front bumper
Silvia tined side markers
Silvia headlight brackets
Suspension
BC coilovers 10k/12k
Spl pro v5 titanium traction rods
Spl pro v5 titanium toe rods
Spl pro v5 titanium camber arms
Spl pro v5 titanium eccentric lockout
Spl pro v5 titanium front caster rods
Spl solid aluminum subframe bushings
Nismo power brace
Whiteline adjustable rear sway bar
Whiteline adjustable front sway bar
(Both with full bushing sets)
Cleaned and painted subframe
Steering
New oem steering rack
Energy rack bushings
DIF Solid steering rack bushing
Z32 inner tie rods
Spl pro v5 titanium outer tie rods
Brakes
Wilwood 6 piston front
-13" vented and slotted rotor
Wilwood 4 piston rear
-12.2" vented and slotted rotor
Oem Z32 master cylinder
Braided ss brake lines
Drivetrain
Driftmotion/action stage 4, 6 puck disc and 2800lb pressure plate
Driftmotion lightweight flywheel
Kaaz 2way lsd(20disc)
Kaaz lsd oil
Arp flywheel bolts
Arp pressureplate bolts
oEM locking flywheel locking tab
Wheels/setup
Ichiba 5 lug coversion
+25mm spacers (front)
Cobra reps 10.5x17+ 20
Rear 255/45/17
Front 245/45/17
Tires are 100% tread nittos
Nrg rose gold extended lugs
Interior
Nrg v3 gunmetal quick release
Nrg short hub adapter
Nrg deep corn wheel
Prosport evo gauges
-oil pressure
-coolant temp
-boost gauge
-oil temperature
-wideband and sensor
Dash cap (to cover cracked dash)
Car has never been driven, and engine has fresh timing set and turns over smooth.
any questions ask!
Only things required to finish this are a Drive shaft, intercooler piping and BOV. there may be some other small things that i may be forgetting. I also have the stock ecu and engine harness for the 2jz.
PICTURES:
http://i100.photobucket.com/albums/m29/todddaniels/null-60.jpg (http://s100.photobucket.com/user/todddaniels/media/null-60.jpg.html)
http://i10
0.photobucket.com/albums/m29/todddaniels/null-59.jpg (http://s100.photobucket.com/user/todddaniels/media/null-59.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-57.jpg (http://s100.photobucket.com/user/todddaniels/media/null-57.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-55.jpg (http://s100.photobucket.com/user/todddaniels/media/null-55.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-53.jpg (http://s100.photobucket.com/user/todddaniels/media/null-53.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-52.jpg (http://s100.photobucket.com/user/todddaniels/media/null-52.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-51.jpg (http://s100.photobucket.com/user/todddaniels/media/null-51.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-50.jpg (http://s100.photobucket.com/user/todddaniels/media/null-50.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-49.jpg (http://s100.photobucket.com/user/todddaniels/media/null-49.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-37.jpg (http://s100.photobucket.com/user/todddaniels/media/null-37.jpg.html)
Rim to rotor clearance
http://i100.photobucket.com/albums/m29/todddaniels/null-36.jpg (http://s100.photobucket.com/user/todddaniels/media/null-36.jpg.html)
Stock vs new
http://i100.photobucket.com/albums/m29/todddaniels/null-35.jpg (http://s100.photobucket.com/user/todddaniels/media/null-35.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-34.jpg (http://s100.photobucket.com/user/todddaniels/media/null-34.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-33.jpg (http://s100.photobucket.com/user/todddaniels/media/null-33.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-31.jpg (http://s100.photobucket.com/user/todddaniels/media/null-31.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-30.jpg (http://s100.photobucket.com/user/todddaniels/media/null-30.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-28.jpg (http://s100.photobucket.com/user/todddaniels/media/null-28.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-27.jpg (http://s100.photobucket.com/user/todddaniels/media/null-27.jpg.html)
Test fitting(tape)
http://i100.photobucket.com/albums/m29/todddaniels/null-26.jpg (http://s100.photobucket.com/user/todddaniels/media/null-26.jpg.html)
PRICE: 12,000
SHIPPING: none
CONTACT INFORMATION : Todd Daniels 906-440-9930(text preferred)
LOCATION: Houston Texas
PAYMENT OPTIONS: Cash, Paypal, wire transfers
SALE TYPE: Vehicle
Build thread link! =
2jz s13 coupe build - Houston240sx.com Forums (http://www.houston240sx.com/showthread.php?t=68246)
-----------------
DESCRIPTION:
Well unfortunatly here it is. i have been debating making this thread for a while. but here goes.
For sale, my coupe, everything on this car has been purchased as a new product. much thanks to Autrey at DWS. But seeing as i have even one day off a week i can no longer take the time to finish this or have the money to finish it. Storage units add up after time lol. Any questions please call or text me, in addition to posting here(so others may see).
i am also in no rush to sell.
And also not looking to part out.
I dont have the time to take things off.
ive put close to 22,000 into this project and i am taking a large hit for the price i am selling it for. I just cannot afford it and no longer have time to finish it. If it comes down to it ill just keep it and let it sit for a few years.
Thanks for looking!
and now to the good stuff!
VIN:JN1MS34P4PW306973
Most complete list of mods
Engine
2jzgte -aristo
BC adjustable cam gears
OEM timing belt
OEM timing tensioner
OEM supra water pump
OEM thermostat
Driftmotion pulley set
Cusco solid engine mounts
Driftmotion engine/trans brackets
Oil cooler and lines(black)
Greddy/grex thermostatic oil adapter
Sr20 mishimoto radiator
Driftmotion intercooler
Ebay downpipe for aristo
New full gasket set
Headgasket+arp studs(not installed)
Engine management
Stock aristo ecu and wire harness(un touched or cut)
Fuel setup
6AN fuel lines from tank
walbro 416 e85 compatible pump(400lph)
Aeromotive FPR kit for aristo
Body
Silvia front 30mm over fenders(d1)
Carbon d1 silvia hood
Aerocatch hood pins/latches
Sideskirts(bomex?)
Front bumper
Silvia tined side markers
Silvia headlight brackets
Suspension
BC coilovers 10k/12k
Spl pro v5 titanium traction rods
Spl pro v5 titanium toe rods
Spl pro v5 titanium camber arms
Spl pro v5 titanium eccentric lockout
Spl pro v5 titanium front caster rods
Spl solid aluminum subframe bushings
Nismo power brace
Whiteline adjustable rear sway bar
Whiteline adjustable front sway bar
(Both with full bushing sets)
Cleaned and painted subframe
Steering
New oem steering rack
Energy rack bushings
DIF Solid steering rack bushing
Z32 inner tie rods
Spl pro v5 titanium outer tie rods
Brakes
Wilwood 6 piston front
-13" vented and slotted rotor
Wilwood 4 piston rear
-12.2" vented and slotted rotor
Oem Z32 master cylinder
Braided ss brake lines
Drivetrain
Driftmotion/action stage 4, 6 puck disc and 2800lb pressure plate
Driftmotion lightweight flywheel
Kaaz 2way lsd(20disc)
Kaaz lsd oil
Arp flywheel bolts
Arp pressureplate bolts
oEM locking flywheel locking tab
Wheels/setup
Ichiba 5 lug coversion
+25mm spacers (front)
Cobra reps 10.5x17+ 20
Rear 255/45/17
Front 245/45/17
Tires are 100% tread nittos
Nrg rose gold extended lugs
Interior
Nrg v3 gunmetal quick release
Nrg short hub adapter
Nrg deep corn wheel
Prosport evo gauges
-oil pressure
-coolant temp
-boost gauge
-oil temperature
-wideband and sensor
Dash cap (to cover cracked dash)
Car has never been driven, and engine has fresh timing set and turns over smooth.
any questions ask!
Only things required to finish this are a Drive shaft, intercooler piping and BOV. there may be some other small things that i may be forgetting. I also have the stock ecu and engine harness for the 2jz.
PICTURES:
http://i100.photobucket.com/albums/m29/todddaniels/null-60.jpg (http://s100.photobucket.com/user/todddaniels/media/null-60.jpg.html)
http://i10
0.photobucket.com/albums/m29/todddaniels/null-59.jpg (http://s100.photobucket.com/user/todddaniels/media/null-59.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-57.jpg (http://s100.photobucket.com/user/todddaniels/media/null-57.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-55.jpg (http://s100.photobucket.com/user/todddaniels/media/null-55.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-53.jpg (http://s100.photobucket.com/user/todddaniels/media/null-53.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-52.jpg (http://s100.photobucket.com/user/todddaniels/media/null-52.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-51.jpg (http://s100.photobucket.com/user/todddaniels/media/null-51.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-50.jpg (http://s100.photobucket.com/user/todddaniels/media/null-50.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-49.jpg (http://s100.photobucket.com/user/todddaniels/media/null-49.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-37.jpg (http://s100.photobucket.com/user/todddaniels/media/null-37.jpg.html)
Rim to rotor clearance
http://i100.photobucket.com/albums/m29/todddaniels/null-36.jpg (http://s100.photobucket.com/user/todddaniels/media/null-36.jpg.html)
Stock vs new
http://i100.photobucket.com/albums/m29/todddaniels/null-35.jpg (http://s100.photobucket.com/user/todddaniels/media/null-35.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-34.jpg (http://s100.photobucket.com/user/todddaniels/media/null-34.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-33.jpg (http://s100.photobucket.com/user/todddaniels/media/null-33.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-31.jpg (http://s100.photobucket.com/user/todddaniels/media/null-31.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-30.jpg (http://s100.photobucket.com/user/todddaniels/media/null-30.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-28.jpg (http://s100.photobucket.com/user/todddaniels/media/null-28.jpg.html)
http://i100.photobucket.com/albums/m29/todddaniels/null-27.jpg (http://s100.photobucket.com/user/todddaniels/media/null-27.jpg.html)
Test fitting(tape)
http://i100.photobucket.com/albums/m29/todddaniels/null-26.jpg (http://s100.photobucket.com/user/todddaniels/media/null-26.jpg.html)