driftthis
10-16-2013, 08:36 AM
I am finally ready to sell this thing. It's out of my car, boxed up and ready to go.
Has (2) -4AN fittings on the top side and (1) -10AN bung on the bottom (no lines included).
-Height (tank AN bung to radiator cap: ~10.5"
-Diameter: ~5"
This will not come with any additional AN fittings or lines. However, a NISMO Radiator cap will be included.
This thing is pretty unique and looks bad ass.
The top bracket, was originally fitted to bolt to the front of an RWD SR20VE setup (the top bracket ALSO works on standard RWD SR heads, where it bolts onto the valve cover.
The second bracket (base of surge tank) requires you to attach an L-bracket (if I remember correctly-it was easy to make - bend a piece of metal flat stock and drill the required holes to secure the surge tank to the block) to the existing bracket that is welded onto the surge tank - in order for that bracket to work on a RWD SR.
I borrowed the following photos from Brian Wilkerson's photobucket.
There was another plate welded from the bend at the end of the bracket to the tank itself (forming a triangle):
http://i79.photobucket.com/albums/j123/JDMFresh/S7300067.jpg
Installed on Brian Wilkerson's car:
http://i79.photobucket.com/albums/j123/JDMFresh/S7300070.jpg
Location: Virginia Beach, Virginia
Contact: PM
Price: $155 paypal-ed and shipped.
Has (2) -4AN fittings on the top side and (1) -10AN bung on the bottom (no lines included).
-Height (tank AN bung to radiator cap: ~10.5"
-Diameter: ~5"
This will not come with any additional AN fittings or lines. However, a NISMO Radiator cap will be included.
This thing is pretty unique and looks bad ass.
The top bracket, was originally fitted to bolt to the front of an RWD SR20VE setup (the top bracket ALSO works on standard RWD SR heads, where it bolts onto the valve cover.
The second bracket (base of surge tank) requires you to attach an L-bracket (if I remember correctly-it was easy to make - bend a piece of metal flat stock and drill the required holes to secure the surge tank to the block) to the existing bracket that is welded onto the surge tank - in order for that bracket to work on a RWD SR.
I borrowed the following photos from Brian Wilkerson's photobucket.
There was another plate welded from the bend at the end of the bracket to the tank itself (forming a triangle):
http://i79.photobucket.com/albums/j123/JDMFresh/S7300067.jpg
Installed on Brian Wilkerson's car:
http://i79.photobucket.com/albums/j123/JDMFresh/S7300070.jpg
Location: Virginia Beach, Virginia
Contact: PM
Price: $155 paypal-ed and shipped.