greddy profec b type s not working

[omgwtf]

so i have my ebc plugged up and it powers on fine. i have the com port of the solenoid connected to my internal wastegate. and the NO port connected to my boost source. my boost source is coming from my intake manifold and routes around the back of the head via a metal line that connects with a rubber line to the solenoid. the boost controller itself is teed into the fpr vacuum line. my high boost setting is all the way up and it will only allow 15 psi. any thoughts on what i did wrong?

[omgwtf]

Nobody?

Sent from my SCH-I535 using Tapatalk 2

[codyace]

Have you adjusted the gain at all?

With that said with internal gates it may simply be bypassing too much as well. What turbo?

[omgwtf]

Yeah I messed with gain and it didn't do anything its a gt2860rs .64 a/r

Sent from my SCH-I535 using Tapatalk 2

[codyace]

Is the wastegate on the turbo fully shut when off? Sometime if they aren't adjusted/slightly preloaded when shut they don't work right.

I know this sounds funny and it requires you to really watch the gauge, but what if you pinch the line shut? Does it go over 15 then? It should fly up well past it, but just let back out if it does.