FlatBlaack
10-01-2013, 01:42 PM
Located in Fayetteville, Arkansas, but will be moving to Austin, Texas soon if that's closer to anyone. Prices are firm.
The engine has a blown headgasket, blew #4.
I'm not parting out the shortblock unless you want it shipped and are willing to pay the full price for the assembled shortblock. I'd rather not take it apart if at all possible.
Here's what's available:
Can make 'package deals' if you are looking to buy several things. Buyers pay shipping. I *REALLY* don't want to ship the block, so you'll have to accommodate me if you want that to happen.
CP pistons Crower 625+ rods ARP heads/mains/bolts
Ported head, 3-angle valve job, new valve seals
$1400
Megasquirt 2 Extra
LC-1 Wideband controller and sensor
$600 comes with wiring harness/cables/diagrams
GM Yukon (D585) Coil on Plug setup
S14 Distributor (with 50mm DIYAT trigger wheel)
$120 for COP setup (with triggerwheel)
S14 Distributor (stock)
$50
11 pound Fidanza 250mm flywheel
350Z 250mm clutch/Pressure plate
$450
Stock intake manifold with blocked off EGR ports, comes with Throttle Body/sensor
$100
3.5 bar (50 psi) external fuel pressure regulator
$80
Freshly rebuilt T3/T4 T04B H-Trim, full 2.5" exhaust with 4 bolt (garret-style) downpipe, 3" stainless steel turbo muffler
$500 for turbo + exhaust, $300 for turbo only
(2) S14 transmissions. One came out of the car while it was running, not sure of the other.
$100 for good tranny - Stainless steel clutch slave line + new slave cyl will go with it $40 for unknown trans
Also have a stock starter
$50
power steering pump
$30
Upgraded Maxima Alternator, drilled out tabs for use in the 240SX, modified upper bracket
$60
IAP tubular Mani SOLD
Z31 300ZX T3 turbo SOLD
JGS 38mm Wastegate SOLD
Front Mount Intercooler setup (FMIC) SOLD
stainless steel oil feed lines SOLD
JGS engine mounts SOLD
JGS polyurethane transmission mount SOLD
http://i254.photobucket.com/albums/hh81/flatblack280/CYMERA_20130922_223144.jpg?t=1379907422
http://i254.photobucket.com/albums/hh81/flatblack280/CYMERA_20130922_115100.jpg?t=1379907427
The engine has a blown headgasket, blew #4.
I'm not parting out the shortblock unless you want it shipped and are willing to pay the full price for the assembled shortblock. I'd rather not take it apart if at all possible.
Here's what's available:
Can make 'package deals' if you are looking to buy several things. Buyers pay shipping. I *REALLY* don't want to ship the block, so you'll have to accommodate me if you want that to happen.
CP pistons Crower 625+ rods ARP heads/mains/bolts
Ported head, 3-angle valve job, new valve seals
$1400
Megasquirt 2 Extra
LC-1 Wideband controller and sensor
$600 comes with wiring harness/cables/diagrams
GM Yukon (D585) Coil on Plug setup
S14 Distributor (with 50mm DIYAT trigger wheel)
$120 for COP setup (with triggerwheel)
S14 Distributor (stock)
$50
11 pound Fidanza 250mm flywheel
350Z 250mm clutch/Pressure plate
$450
Stock intake manifold with blocked off EGR ports, comes with Throttle Body/sensor
$100
3.5 bar (50 psi) external fuel pressure regulator
$80
Freshly rebuilt T3/T4 T04B H-Trim, full 2.5" exhaust with 4 bolt (garret-style) downpipe, 3" stainless steel turbo muffler
$500 for turbo + exhaust, $300 for turbo only
(2) S14 transmissions. One came out of the car while it was running, not sure of the other.
$100 for good tranny - Stainless steel clutch slave line + new slave cyl will go with it $40 for unknown trans
Also have a stock starter
$50
power steering pump
$30
Upgraded Maxima Alternator, drilled out tabs for use in the 240SX, modified upper bracket
$60
IAP tubular Mani SOLD
Z31 300ZX T3 turbo SOLD
JGS 38mm Wastegate SOLD
Front Mount Intercooler setup (FMIC) SOLD
stainless steel oil feed lines SOLD
JGS engine mounts SOLD
JGS polyurethane transmission mount SOLD
http://i254.photobucket.com/albums/hh81/flatblack280/CYMERA_20130922_223144.jpg?t=1379907422
http://i254.photobucket.com/albums/hh81/flatblack280/CYMERA_20130922_115100.jpg?t=1379907427