PDA

View Full Version : Need help with swap


SevenWays
08-17-2013, 05:21 PM
I just finished my Sr20 swap but my fuel injector is not priming, i checked all my grounds, my fuel lines are correct. 1 thing i forgot was the ignition chip after i tried to start the car. The battery is fine and the fuel pump is fine and all getting electricity. there is gas in the car aswell, can anyone help me?

also replaced the fuel pump relay with a new one and still nothing.

Does anyone know where this goes?

http://i8.photobucket.com/albums/a20/danny273/D50A1B8B-DE66-4CB6-A284-A620DF8667D0-5137-00000208B4DDB5A8_zpsbeddd1da.jpg (http://s8.photobucket.com/user/danny273/media/D50A1B8B-DE66-4CB6-A284-A620DF8667D0-5137-00000208B4DDB5A8_zpsbeddd1da.jpg.html)

rubhamusan
08-29-2013, 07:57 AM
If the injectors are not priming then orange wire start signal on the dash plug is not wired up.

SevenWays
08-29-2013, 04:48 PM
there is no gas getting to the engine, i unplugged them and no gas comes out. The after market fuel pump doesnt prime, so i took it out and then put the stock and still nothing, and the connector in the back gets 12V

SevenWays
10-22-2013, 02:22 PM
Can anyone help me out??????????????????????