View Full Version : My 86 Mazda b5700 Drifter
jc50942
08-12-2013, 10:08 PM
So i was turned on to this forum by a couple freinds of mine, figured id post up some pics of what i've done to this thing...got alot of pics to post so yeh.
this is what it was in the begining
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3464.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3462.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3466.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3467.jpg
getting ready to get the motor mounts set.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3530.jpg
mount fabricated.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3536.jpg
getting welded in.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3541.jpg
and a nice greasy motor to get tranny mounts made and driveshaft made.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3572.jpg
this is the begining of my disc brake swap. Used chevy pickup brakes.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3688.jpg
had to have the center of the rotor bored out to fit my hub
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3705.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3706.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3707.jpg
making plates for the caliper brackets
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3710.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3711.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3717.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3712.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3714.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3716.jpg
and thats the brakes! ran the smaller caliper with the front brakes and the bigger dual piston independent from the rest of the system for the hand brake.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/100_3725.jpg
gutted cluster to make a custom kinda deal.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0012.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0013.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0014.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0015.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0017.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0018.jpg
and the finished product...nothing fancy, just the necessities.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0019.jpg
the new motor to replace that old greasy thing.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/newmotor1.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0022.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0023.jpg
ahh...she looks right at home sitting in there.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0024.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0026.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/174_0027.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/396268_365224883501990_100000434439025_1199983_142 0686149_n.jpg
decided to fork up some cash and do a 5 speed swap.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0004_zpscf7b2aa3.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0011_zps4c27c4df.jpg
made my own slave bracket.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0013_zps92427107.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0015_zps61e953b0.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0021_zps2906436b.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0030_zps74ba77aa.jpg
and pretty much the final product.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0034_zps6bcc2e07.jpg
there are alot more pics, but im lazy...this is what i had for rear suspension before with the stock rear end.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0075_zps980f5010.jpg
really like it, but then i did this to the pinion, which i was kinda expecting considering it was a stock rear end.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0100_zps0da62d6d.jpg
hard to tell from the pic, but the end of the pinion is in there.
ive got a lot more to post but it says i can only post so ma pics at once so hopefully this will get me started
soundboy
08-15-2013, 05:04 PM
Good work m8
Sent from my GT-P3110 using Tapatalk 4
GabAlmighty
08-15-2013, 06:06 PM
Can't wait to see some more pictures
jc50942
08-15-2013, 06:38 PM
well, now that i can post some more...(thank you mods for letting me post my Mazda Build on a Nissan Forum :)....
This is how it rolled back into the garage.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0099_zpsc07a0c5e.jpg
started cutting and striping it down.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0102_zps70eff176.jpg
box off
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0103_zpsa3e6bfe0.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0104_zpsb94f7333.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0105_zps91be5a8c.jpg
Donor car for the new rear suspension.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0107_zpse4fef2fe.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0109_zps03efd8ed.jpg
set it underneath just to get an idea of what kinda fab work i would need to do.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0114_zps23182e01.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0113_zpsfac20049.jpg
picked up a diff
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0122_zpsd7f42493.jpg
diff mounted, and as you can see, there isnt anyplace for the stuts to come up through the contol arms...gonna have to remedy that.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0130_zps9d31521a.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0130_zps9d31521a.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0131_zps9c41f6ce.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0133_zps55b477aa.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0134_zpsa5d4b308.jpg
should be room now.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0135_zps5cca76f6.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0136_zps5ab94191.jpg
a couple more pieces to fill in and give it a little more strength
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0137_zps2104ccf1.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0139_zps5c5ea1bc.jpg
should be room now.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0140_zps3f7d3c91.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0141_zpsaf0c6d56.jpg
and thats pretty much how it sits. Gotta put the brakes together, and some more fab work to make the strut towers, which im gonna go work on right meow.
Reece
08-16-2013, 12:18 AM
SUBBED. I love drift trucks.
Jissan
08-16-2013, 01:22 AM
Fools be like, :rant: "It's a Mazda TRUCK, WTF u doin' on Zilvia, blah blah flame..."
To which you say, :bigok: "S13 subframe, fool."
BOOYAH /argument
Extra points for:
serious fabrication work
pink diff
a fucn fuel cell in the bed,
unicorn on the donor S13.
soundboy
08-16-2013, 08:11 AM
Extreme mods. I heard the rx7 lsd guts would of worked in the Mazda 2600 diff
Sent from my GT-P3110 using Tapatalk 4
Ratpack_Chad
08-16-2013, 12:24 PM
This thing is Rad
jc50942
08-16-2013, 01:08 PM
Extreme mods. I heard the rx7 lsd guts would of worked in the Mazda 2600 diff
you can use the guts or the whole third member.
jc50942
08-18-2013, 06:50 PM
welp...got some more done...put this in for the two rear subframe mounts.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0148_zps8e241eac.jpg
bottom view of the passenger side.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0149_zpsf884a6fe.jpg
bottom drivers side.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0150_zpsfc76b87d.jpg
put in some gussets
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0151_zpsb4ced17b.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0152_zps3cc045e0.jpg
started making the top piece for the strut towers.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0153_zps7a36273a.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0154_zps38ef662b.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0155_zpsd396be50.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0156_zps7df9a533.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0158_zps61cca88a.jpg
this is a view from the top down of the front subrame mounts...wasnt sure how to make these mounts till i stared at it for awhile.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0159_zps917f0add.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0160_zpsb13d19eb.jpg
side view
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0161_zps6f8cccbb.jpg
so this is what i cam up with.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0163_zps415d5db7.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0164_zps3eb28383.jpg
outside view
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0173_zpsb400584d.jpg
inside frame view
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0174_zps23eb19a3.jpg
chunk of metal here, chunk of metal there,,,blah blah blah.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0167_zps020074da.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0168_zps64c857d6.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0170_zpseb74a12e.jpg
and then i ran out of steel , i've got alot of "filling" to do, some cross bracing, a driveshaft and some brakes and we will be good to go!!
How did you measure the anti-squat when you fabbed your subframe mounting position?
jc50942
08-19-2013, 06:45 PM
im not sure what that means...i did take a lot of measurements though :)
FourtyKid
08-19-2013, 08:43 PM
Ah shit subscribed!
TheRealSy90
08-20-2013, 12:15 AM
Pfft who cares about measuring. Just drive it hard.
nujabe
08-20-2013, 09:50 PM
dear mother of god this is a cool build thread..
hella work but hella cool
StryfeS13
08-20-2013, 11:29 PM
This is sweet.
Really hope you finish it!
mechanicalmoron
08-21-2013, 12:25 AM
Fucking cool.
wattupbaii
08-21-2013, 10:12 AM
i wouldve liked to see a roatary in there or a ka/sr
soundboy
08-21-2013, 11:30 AM
SR20 would be ideal. But power is power
Sent from my GT-P3110 using Tapatalk 4
Roscoe.
08-21-2013, 11:33 AM
I don't mean to talk shit, but I don't see how you're going to be able to adequately set up the suspension with that subframe set up. Unless you have that figured out, in which case do tell?
xBtony
08-21-2013, 11:39 AM
Super awesome fab work!
jc50942
08-21-2013, 06:43 PM
i would've liked to see a rotary in there or a ka/sr
i went with the gen 1 SBC because they are super reliable and easy to maintain. I personally have more experience with them so they are way easier for me to work with, no electronics, no bullshit to deal with.
jc50942
08-21-2013, 06:44 PM
I don't mean to talk shit, but I don't see how you're going to be able to adequately set up the suspension with that subframe set up. Unless you have that figured out, in which case do tell?
no offense taken, but what part of setting it up do you see as a problem?..
jc50942
08-21-2013, 06:45 PM
Super awesome fab work!
thank you sir
jc50942
08-30-2013, 11:11 PM
so ...some more updates and pics....mostly just pics.
all the pieces cut and tacked in on the drivers side.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0178_zps419b6d47.jpg
passengers side.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0179_zps89a166f6.jpg
drivers side all welded in
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0180_zps48c7305d.jpg
passenger side.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0181_zpsdad86994.jpg
some bracing for the towers.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0184_zps52b06872.jpg
the woman decided she wanted to try welding so i let her...she did a damn fine job too.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0185_zps19ec15e3.jpg
and some more bracing for the front sub frame mounts....this piece is further to the top and im gonna come off of this pices and go to the bottom of the front sub frame mount...will be nice and stout.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0186_zps044dc45c.jpg
more pics tomorrow
jc50942
09-01-2013, 09:59 PM
just a few more pics.
braces off the front subframe mounts to the center.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0187_zps3ad74f8d.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0188_zpsb7d14bea.jpg
new subframe bushings
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0189_zpscc04876a.jpg
took about two hours of hammering to get the old ones out, didn't think to bring my air hammer home from the shop....oh well
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0192_zps86cad1dd.jpg
so now i just gotta get a driveshaft made, maybe a little black spray paint and a little cutting to get the bed back on.
89s13sd
09-01-2013, 10:42 PM
Looks good! You going to be ready for the next event?
jc50942
09-01-2013, 10:57 PM
should be ready to go.
jc50942
09-02-2013, 09:43 PM
no more pics at this point...just did a bunch of welding on the bottom side, made some washers for the new bushings. gonna get a driveshaft made this week and gonna take her for a test drive and see how she feels. I wanna get some aftermarket ruca's and gotta do an alignment and we should be good to go.
DET240SX
09-04-2013, 09:28 AM
Dude, awesome build! Can't wait to see you drifting this truck
jc50942
09-04-2013, 03:01 PM
ive got some video from the last couple years with different rear setups. I should throw them up for comparison , kinda like before and after.
jc50942
09-09-2013, 08:47 PM
drive shaft tomorrow!!
jc50942
09-15-2013, 08:10 PM
so i skipped a few pics but i got a couple vids from this weekends drift event.
heres my fave.
Mazda B2000 Burnout. - YouTube (http://youtu.be/Of1GtEAb1Hk)
theericsmith
09-15-2013, 08:26 PM
i am in awe as to how the frame came together from when you got it.
am i the only one that finds this shit mind blowing that this dude makes this incredible fab work seem effortless? i'd kill to have your knowledge hahaha
jc50942
09-16-2013, 06:28 PM
thank you sir, but ive gotta say, ive never done anything like this before and anyone can do it if they have the patience
Sansone
09-17-2013, 02:07 PM
Pretty cool build, definitely interested in seeing more of this!
jc50942
09-23-2013, 09:19 PM
i had alot of issues at his last drift event, need to get some aftermarlet ruca's so i can get my camber out more in the rear. not enough traction in the rear. and i ended up having to swich to a straight welded diff, the lsd wasnt working woth a crap, but overall, i was happy with the change.
jc50942
10-23-2013, 07:00 PM
welp, winter is here so im gonna start tearing it apart again. get some paint on the rear end setup(starting to rust a little), put on all new suspension arms. Upper and lower control arms, toe arms and weld the diff a little more since when i did it originally i was in a hurry. Pics to follow(at some point).
Riddle_Rob
11-27-2013, 09:24 PM
Subscribing in case you come back to this.
I'm currently doing the exact same thing to my Ranger.
jc50942
11-27-2013, 10:33 PM
Subscribing in case you come back to this.
I'm currently doing the exact same thing to my Ranger.
you gotta build thread for yours yet?...would love to see it...!!
Riddle_Rob
11-28-2013, 09:27 PM
Not on here but...
2.3T Drift Truck /w 4 Wheel Camber BUILD (http://www.rangerpowersports.com/forum/showthread.php/283477-2-3T-Drift-Truck-w-4-Wheel-Camber-BUILD/)
http://i44.photobucket.com/albums/f46/Riddle_Rob/All%20wheel%20camber%20build/IMG-20131127-02172_zps228f383f.jpg
man this is great!! good job. keep it up , gota see this going! i would of wished to see you keep it mazda and drop a 20b in that bitch hahah .,
theericsmith
12-31-2013, 11:25 PM
is this thing still alive? not tryna dick ride but literally, greatest build to ever grace zilvia
jc50942
12-31-2013, 11:37 PM
oh its alive and kicking... guess there could be more to this build thread if i was trying to make the body look pretty but i could give a shit less what it looks like until it performs like it should. gonna get some new arms on the way soon. to make the rear sit like it should.
jc50942
12-31-2013, 11:38 PM
is this thing still alive? not tryna dick ride but literally, greatest build to ever grace zilvia
thank you kind sir
jc50942
02-16-2014, 09:24 AM
for the sub frame pulled back out, cleaned it up a bit and put on all new arms.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN02251_zps93998625.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN02241_zps0a65104a.jpg
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN02261_zpsf0277670.jpg
and back together
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN02271_zpsfb29f925.jpg
UNDECIDEDFBODY
02-16-2014, 04:53 PM
i am subscribed i also have a b2200 that i wanna do this to
jc50942
02-20-2014, 11:26 PM
so, got it back together a few days ago, now just gotta take it down to shop and do an alignment, trying to get 0 toe, -1 degree camber in the rear, -4 degrees camber with -7 degrees caster and zero toe in the front.
UNDECIDEDFBODY
02-22-2014, 09:06 AM
so, got it back together a few days ago, now just gotta take it down to shop and do an alignment, trying to get 0 toe, -1 degree camber in the rear, -4 degrees camber with -7 degrees caster and zero toe in the front.
what are you running in the front as far as suspension and stuff? aare you five lug in the front
this is what im working with
http://i633.photobucket.com/albums/uu57/gubi09/A488C9E5-2A7B-4E3C-B09F-7FF91DEC7539_zpsjbzz6qbd.png (http://s633.photobucket.com/user/gubi09/media/A488C9E5-2A7B-4E3C-B09F-7FF91DEC7539_zpsjbzz6qbd.png.html)
http://i633.photobucket.com/albums/uu57/gubi09/BA7BBE08-91C9-4F30-AD36-AB1B32808DF8_zpsfwyarfrs.png (http://s633.photobucket.com/user/gubi09/media/BA7BBE08-91C9-4F30-AD36-AB1B32808DF8_zpsfwyarfrs.png.html)
jc50942
02-27-2014, 08:05 PM
ive just got spacer adapters in the front to make it 5x4.5,
jc50942
02-27-2014, 08:06 PM
hopefullly my sway bar will be here next week, also ordered a bracket and all the calipers and what not for a dual caliper setup in the rear... I like making my own stuff, but it is kinda nice to be able to just bolt stuff on.
jc50942
03-04-2014, 07:30 PM
well...sway bar hasnt showed up yet, but got my calipers and brackets for the dual caliper setup
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/IMG_0228_zps7b7692f3.jpg
install pics to follow, probably gonna get it all done this weekend.
jc50942
03-05-2014, 08:11 PM
got all my brake lines and fittings today, i would have made my own brake lines but i dont have the dies for AN fittings, and i couldnt justify buying the tooling for them considering ill proballyy only use them once.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/IMG_0231_zpsc9a074e1.jpg
and test fitted some wheels to see what kinda width and offfset i can get away with...i kinda like the color too.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/IMG_0233_zpsaea76f0d.jpg
keep in mind the suspension is hanging a little at this point.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/IMG_0232_zps6c7446dc.jpg
Reece
03-06-2014, 02:45 PM
Really excited to see more of this.
ferrariowner123
03-07-2014, 12:37 AM
WOOHOO!! So glad this didn't die.
As said above, so glad to see more of this.
-Kyle
jc50942
03-07-2014, 07:00 PM
bad part is, after i get these brakes on, all i got left to do is cosmetic shit, and i really dont care what the truck looks like.
nickfd3s
03-09-2014, 04:57 PM
Look's like a fun build, can't wait to see more.
jc50942
03-09-2014, 06:31 PM
so... got the brakes, done...heres a few pics.
this is the stock setup
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0277_zps63172993.jpg
caliper, hub bearing and backing plate removed.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0279_zps39b96731.jpg
plate for second caliper installed between knuckle and hub bearing.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0280_zps7e1dd6b4.jpg
second caliper and rotor back on.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0281_zps7a42a34f.jpg
and besides the plumbing, this is the finished product.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0282_zps917b47a9.jpg
and yes, i know the rotors are rusty...trucks been sitting for a bit.
jc50942
03-10-2014, 06:19 PM
your subframe mounting position?http://sister.thewindowdi.com/4.jpg
what do you mean?
mechanicalmoron
03-10-2014, 11:11 PM
I think he means that, though the bracket itself has adequate looking gussets, there's no trangulation where the bracket is welded to the frame - it's a single weld, and looks flimsy (I'd assumed, honestly, that it was only preliminary and you'd gusset it, I didn't notice it was still that way until he said it).
Unless there's a gusset we can't see on the back, or something.
jc50942
03-11-2014, 08:17 AM
i guess if i saw that id probally think wtf as well...however,
there is a support from the back ofeach one of these mounts on the inside to a frame support. ill see if i can find a pic.
TheRealSy90
03-11-2014, 08:19 AM
braces off the front subframe mounts to the center.
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0188_zpsb7d14bea.jpg
I think he means that, though the bracket itself has adequate looking gussets, there's no trangulation where the bracket is welded to the frame - it's a single weld, and looks flimsy (I'd assumed, honestly, that it was only preliminary and you'd gusset it, I didn't notice it was still that way until he said it).
Unless there's a gusset we can't see on the back, or something.
Seems braced to me.
jc50942
03-11-2014, 08:24 AM
http://i1095.photobucket.com/albums/i470/jc50942/The%20Mazda/DSCN0188_zpsb7d14bea.jpg
Hatemy7
03-11-2014, 09:41 AM
wow this thing is sick!!! seriously
jc50942
03-12-2014, 07:28 PM
well...found out that the sway bar i ordered was out of stock, they didnt bother to send me an email of any kind to tell me, so they are giving me the next step up for the same price. so im happy about that. Gonna take the truck to the shop this weekend and do an alignment and ill be ready!
jc50942
03-18-2014, 08:29 PM
well...been looking at it and thinking about what to do next...
UNDECIDEDFBODY
04-03-2014, 06:35 PM
well...been looking at it and thinking about what to do next...
annything?
jc50942
04-03-2014, 08:03 PM
well...my sway bar finally showed up after two months so i got that. Fuck you enjuku racing!! other than that, im gonna polish my euros a little and thats probally it . I dont know if ill ever do any cosmetic type stuff because i really dont give a flying fuck what the truck looks like.
GL Chrillz
05-15-2014, 08:13 PM
how does it drive after you did all this?
jc50942
05-15-2014, 08:16 PM
pretty damn good id say...a little on the stiff side, but it aint no caddy.
GL Chrillz
05-15-2014, 08:53 PM
pretty damn good id say...a little on the stiff side, but it aint no caddy.
haha wouldn't expect it to ride like a caddy =p. i'm bored with my s13 now that i have nothing left to do on it. tossing around the idea of making up a tube frame "car" more like a buggy using s13 suspension. seeing your build makes me want to even more
mechanicalmoron
05-17-2014, 11:13 PM
You keep saying you don't care what it looks like.
Then why did you pick a truck? Isn't the point the looks of a truck, with the suspension of a sports car? Otherwise, I'd think any s13 would provide a much better place to start from, to get the same thing. (and you wouldn't have truck steering, unless I missed you replacing that)
Just wondering...
(if by "don't care", you mean "don't care that it's shiny and looks obnoxiously, blindingly new", I couldn't agree more)
soundboy
05-18-2014, 04:50 AM
Very interesting design.
Sent from my GT-P3110 using Tapatalk
jc50942
05-19-2014, 09:08 PM
You keep saying you don't care what it looks like.
Then why did you pick a truck? Isn't the point the looks of a truck, with the suspension of a sports car? Otherwise, I'd think any s13 would provide a much better place to start from, to get the same thing. (and you wouldn't have truck steering, unless I missed you replacing that)
Just wondering...
(if by "don't care", you mean "don't care that it's shiny and looks obnoxiously, blindingly new", I couldn't agree more)
yes...i mean that i dont care that it is shiny and pretty and make ppl go OOOOH and AHHH,... I started with the truck because and the time that was all that was available to me and by the time i knew any better i was too far in to turn back. If i was to do it all over again i would have started with a a better chassis like a 13 or 14. But at the same time i have really enjoyed this build.
jc50942
06-24-2014, 07:53 PM
so yeh,,, it think besides fixing shit that is broke all i gotta left is paint
jc50942
06-24-2014, 09:18 PM
https://www.youtube.com/watch?v=2cxX5fg0T3Q&feature=youtu.be
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.