PDA

View Full Version : SR20det stripped oil psi sensor hole


Danger_Dorn
08-03-2013, 07:30 AM
Yeah so I have a glowshift oil psi sensor. It was installed and then yesterday it popped off so I tried to install it and it wont thread in. I don't have the stocker or a sandwich plate so I was going to find a bolt that fit, JB weld and thread it in there and then get a sandwich plate or something. I'm on a budget so I need to be weary of cost here. What do you think? And what is a good cheap sandwich plate? I was just going to get a cheap sandwich plate from ebay made by "sickspeed". Opinions?

fliprayzin240sx
08-03-2013, 04:20 PM
Find somebody who's parting out and SR and buy their whole stock oil filter block.

http://www.nissansilvia.com/forums/uploads/monthly_07_2010/post-53523-12785123153129_thumb.jpg

KiLLeR2001
08-03-2013, 04:27 PM
Or you can buy a new one for the price of rape.

OEM Nissan Part #: 15238-52F01

Danger_Dorn
08-03-2013, 04:37 PM
whoa shit I didn't even realize that could bolt off. Anyway I figured it out.

I went to orielly and got a stock one, figured out it was a m10-1.0 thread size. Then I went to home depot and got a grade 8 m10-1.0 bolt. I carefully wrenched that mofo in there, and cleared the threads. then since my oil psi sending unit had bent threads I did the same thing with a grade 8 nut. And bingo now its all good. Except the fact that glowshift sucks and the sending unit is not sending lol.