smartoss
08-02-2013, 05:07 PM
Getting rid of my SR so these have to go.
-Tomei Solid pivot lifters x8, Machined rockers x8 , and Test guides/shims
***The guides/shims that are included***
4x 2.800 guides, 3x 2.800 shims (used for Intake side)
3x 2.700 guides, 2x 2.700 shims (used for exhaust side)
15 guides of unknown thickness
15 shims of unknown thickness
If you have a micrometer you would probably find a complete set of test guides/shims but I only listed the ones that still had readable markings.
If you don't have a micrometer plan on buying the 4 guides and shims that are missing. they run ~8 dollars each. Still saving a lot over buying a new set of lifters+guides.
The rockers that are included 4 of them are perfect, 4 of them have some markings, the one pictured on the far left is probably a little too damaged to use. if you stock ones are in good condition it's just a matter of shaving off a little of the tips.
I will include the Tomei instructions on how to properly set these up. How to modify the Rockers and how to measure for new shims.
Asking $225 shipped and paypaled!
http://i.imgur.com/sX2PfJp.jpg?3 (http://imgur.com/sX2PfJp)
http://i.imgur.com/sHwIvcX.jpg?1 (http://imgur.com/sHwIvcX)
PM or text 2188515838
-Tomei Solid pivot lifters x8, Machined rockers x8 , and Test guides/shims
***The guides/shims that are included***
4x 2.800 guides, 3x 2.800 shims (used for Intake side)
3x 2.700 guides, 2x 2.700 shims (used for exhaust side)
15 guides of unknown thickness
15 shims of unknown thickness
If you have a micrometer you would probably find a complete set of test guides/shims but I only listed the ones that still had readable markings.
If you don't have a micrometer plan on buying the 4 guides and shims that are missing. they run ~8 dollars each. Still saving a lot over buying a new set of lifters+guides.
The rockers that are included 4 of them are perfect, 4 of them have some markings, the one pictured on the far left is probably a little too damaged to use. if you stock ones are in good condition it's just a matter of shaving off a little of the tips.
I will include the Tomei instructions on how to properly set these up. How to modify the Rockers and how to measure for new shims.
Asking $225 shipped and paypaled!
http://i.imgur.com/sX2PfJp.jpg?3 (http://imgur.com/sX2PfJp)
http://i.imgur.com/sHwIvcX.jpg?1 (http://imgur.com/sHwIvcX)
PM or text 2188515838