Mass_sr20
07-27-2013, 06:36 PM
So, i've had many problems with my sr since day one. But! i recently got it running and running great at that! but the other day i threw a rocker arm and snapped a guide. I rebuilt it today put in the right size guide and shim ( measured with dial indicator and feeler gauges) and also installed cs rocker arm stoppers. I get everything back together stabbed the cas at tdc go to start it and the battery is dead, so i charge the battery and it starts right up! Idles great! go to give it a little gas and it barely revved and the stalled. Now it wont start. It cranks over great just wont fire, We've tried a tooth back and a tooth forward...nothing.
Any ideas or suggestions?? im going to plug in nistune tomorrow to see if a tune will help but want some feedback before then.
Also its a s13 blacktop sr20det
godspeed gt2871r
aus 850cc injectors
z32 maf
fmic
full 3'' exhaust
circuit sports ras
wiring specialties engine harness
brian crower intake/exhaust valves
If any of that helps
and! If your going to comment saying anything along the lines of "Google it.."
"use a search bar" or "do some research because there 100 posts about this problem" save your time and mine and dont bother.
Thanks!
Any ideas or suggestions?? im going to plug in nistune tomorrow to see if a tune will help but want some feedback before then.
Also its a s13 blacktop sr20det
godspeed gt2871r
aus 850cc injectors
z32 maf
fmic
full 3'' exhaust
circuit sports ras
wiring specialties engine harness
brian crower intake/exhaust valves
If any of that helps
and! If your going to comment saying anything along the lines of "Google it.."
"use a search bar" or "do some research because there 100 posts about this problem" save your time and mine and dont bother.
Thanks!