Freshly rebuilt SR tranny w/Aluminum DS!!!

[Mikester]

As stated: My freshly rebuilt CA tranny w/SR bell housing is for sale... I brought this home from Okinawa and ran it on both my 180SX and my current S13 hatch... A KA bell housing will bolt right on case you are wondering.

Tranny has:

- upgraded front plate

- Nismo pivot

- HKS return springs

- C's short shifter (try to find one of these babies for a decent price!)

http://farm8.staticflickr.com/7256/6974361376_2624d86864_c_d.jpg

http://farm8.staticflickr.com/7234/7120442437_1cb59b269f_c_d.jpg

http://farm8.staticflickr.com/7104/6984062090_7ff442ed38_c_d.jpg

http://farm3.staticflickr.com/2860/9033975614_645725ea78_c_d.jpg

**BTW- the urethane mount & shift knob are NOT included... but the tranny crossmember IS =)




ANNNND:

Driveshaft Shop Aluminum driveshaft for S13 (non-ABS)

http://farm9.staticflickr.com/8021/7444957780_0780236763_c_d.jpg

http://farm9.staticflickr.com/8380/8618530534_ab6aca5d33_c_d.jpg

Will provide receipt for tranny rebuild (just picked it up today, 22 July 2013). The driveshaft has less than 500mi on it and was never drifted or clutch-kicked.

**For those of you who don't know, this all came off one of the cleanest hatches out there- please feel free to troll my build threads here & on DriftSTL & Zeroyon! The only reason I'm selling this stuff is because I'm making too much power & need to upgrade the drivetrain.

$500 firm for everything... I will not split this package up so don't ask.

I accept cash, and Paypal.

Call, PM or text. Not really sure how I'd go about shipping items this large without it costing an arm & leg; so pickup or maybe meeting within a 100mi radius is preferred (will cost you $50 extra for my gas & my time ;) ).

Mike

618-979-9984

[Mikester]

Question came up about differences between CA & SR trannies.

**The packaging (casing) is slightly different; but the mounting, sensors etc are exactly the same as SR/KA. 5th gear is slightly less wimpy; and the shifter plate is different. If you prefer to run a B & M or other KA/SR shifter- the KA/SR shift plates will bolt right on.... But I assure you that as soon as you feel the C's shifter with HKS springs on this one, you'll forget about that real quick.

It pains me to part w/this stuff for so cheap; but unless I do some serious power downgrades, I will not be able to use it safely...

Again, the tranny has NOT been used since rebuild. All bearings, seals etc are fresh & new... Only high-end fluids have been run thru it since I've owned it (had it since 2005-2006).

C'mon fuckers- buy this shit & put it to good use!

[bc.]

You said no part outs, but what about the driveshaft? Surely you could separate that from the transmission?

[Mikester]

You said no part outs, but what about the driveshaft? Surely you could separate that from the transmission?

I could if I wanted to... but not gonna happen.

This is a great combo at a great price. For $100 more than the cost of the driveshft was new- you get a fresh tranny with awesome bells & whistles.

[No 240.. No id]

What that hks cover on the side? Not trying to buy, just wondering.. never seen them before.

[Mikester]

^^Read the item description... Something in it says "HKS"

:l101:

[fliprayzin240sx]

What that hks cover on the side? Not trying to buy, just wondering.. never seen them before.

Comes with stiffer shifter springs. You know how your shifter on neutral sits on the middle, there springs in there that keeps it centered. Springs basically help make the shifter feel more crisp, then with the real C's Shifter, makes the car shift like butter.

[Mikester]

^^Yup...

The feel is tight & precise. Definitely going to miss it.

[bc.]

What is the horsepower 'rating' you were expecting out of this setup?

Good point about the driveshaft though hmmmm....

[Mikester]

Expecting about 420whp out of my motor. As you know i purpose built it with option to go top mount @ 500+

Tranny will handle 350-370 all day on the streets w EASY launches at the strip.

[ghost_silvia]

Would love to have this but shipping would kill the deal.
Somebody should jump on this quick! Not looking for any
trades by any chance?

[Mikester]

I WAS looking to maybe trade for a Z32 transmission... but I just bought one today and possibly a second for a spare :)

[eram]

Soooooooo clean; do want, but would need KA housing to swap in my vert >.<

glws, so sad I have to miss this D:

[Mikester]

^^LOL I can throw in a KA bell housing for ya if you gots the cash ;)

[Mikester]

Hopefully sold, but bump just in case :D

[Mikester]

Pretty sure this is sold & going to an absolutely AWESOME home :D

[Mikester]

SOLD. Mods please close.