KoukiKid
07-17-2013, 09:19 AM
Just put an S14 KADE into an S13.
Everything works, we're getting fuel and the car cranks, but no spark.
We're using an S13 ecu and dizzy in the car.
We're getting power at the dizzy from the ignitor, and power is running to the cas.
Replaced the dizzy, rotor and cap, spark plug wires, engine harness and ecu and still no spark.
All grounds have been checked and rechecked.
Distributor is timed correctly (TDC, dial back 20 degrees and align rotor with cyl. 1 spark plug wire)
Any suggestions? The only thing we haven't replaced is the ignitor, but I feel like it'd be fine if we're getting 12v to the distributor.
Any and all help is appreciated! :bigok:
Everything works, we're getting fuel and the car cranks, but no spark.
We're using an S13 ecu and dizzy in the car.
We're getting power at the dizzy from the ignitor, and power is running to the cas.
Replaced the dizzy, rotor and cap, spark plug wires, engine harness and ecu and still no spark.
All grounds have been checked and rechecked.
Distributor is timed correctly (TDC, dial back 20 degrees and align rotor with cyl. 1 spark plug wire)
Any suggestions? The only thing we haven't replaced is the ignitor, but I feel like it'd be fine if we're getting 12v to the distributor.
Any and all help is appreciated! :bigok: