Flicktitty
07-09-2013, 12:56 PM
I have a slightly used Aem Failsafe wideband. The sensor has about 40? Minutes of idle time on it, and only 3 miles. Only 93 octane fuel has ever been ran through it. Comes with EVERYTHING a new unit has, most of the bags haven't even't been open. Even comes in the AEM box with instructions.
*note: in the pics i didn't have the filter for the vacuum line, it is in the box just not pictured. Also the PINK AEM logo is just a sticker, take the gauge apart and remove the sticker, or use one of the other faces that AEM provides*
NEW these go for $300. I will let this go for $240 shipped. or $230 picked up in the Milwaukee,Wi area. As always i am open to offers.
Might be open to trades, looking for:
S13 coupe rear window spoiler
High Quality S13 silvia GT-R Grill
About the gauge
These AEM Electronics Wideband Failsafe gauges provide the ability to accurately tune the air/fuel ratio, while actively protecting your engine by constantly monitoring air/fuel ratio curves and activating a user-defined failsafe strategy if it runs lean. They can also be used as universal exhaust gas oxygen (UEGO) controllers with an internal boost sensor. The gauges feature an internal data logger, a full color Organic Light Emitting Diode (OLED) display, and the technology to activate a failsafe strategy in the event that the air/fuel ratio falls outside of a user-defined operating window. When this occurs, the user-defined output function that's activated, can save an engine from catastrophic damage. They are a must-have for all tuned performance engines, whether forced induction or naturally aspirated, fuel injected or carburated. These gauges also include six different faceplates and black and silver bezels.
Features include:
* Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
* No free air calibration required
* Internal boost sensor
* Bosch sensor included with LSU4.2, accurate to 0.1AFR
* 0-5V analog output for use with data loggers and EMS units
* Internal Boost Sensor up to 30psi
* On-Board 3+ data logger at 20hz with RPM input
* 24 Sweeping LEDS that are software programmable to create your own red/orange/green area on your gauge
* Data Analysis with AEMdata
* AEMnet compatible(CAN 2.0)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0535_zps06297210.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0535_zps06297210.jpg.html)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0536_zps97b44b69.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0536_zps97b44b69.jpg.html)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0532_zps782e90cb.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0532_zps782e90cb.jpg.html)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0529_zpscf632996.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0529_zpscf632996.jpg.html)
*note: in the pics i didn't have the filter for the vacuum line, it is in the box just not pictured. Also the PINK AEM logo is just a sticker, take the gauge apart and remove the sticker, or use one of the other faces that AEM provides*
NEW these go for $300. I will let this go for $240 shipped. or $230 picked up in the Milwaukee,Wi area. As always i am open to offers.
Might be open to trades, looking for:
S13 coupe rear window spoiler
High Quality S13 silvia GT-R Grill
About the gauge
These AEM Electronics Wideband Failsafe gauges provide the ability to accurately tune the air/fuel ratio, while actively protecting your engine by constantly monitoring air/fuel ratio curves and activating a user-defined failsafe strategy if it runs lean. They can also be used as universal exhaust gas oxygen (UEGO) controllers with an internal boost sensor. The gauges feature an internal data logger, a full color Organic Light Emitting Diode (OLED) display, and the technology to activate a failsafe strategy in the event that the air/fuel ratio falls outside of a user-defined operating window. When this occurs, the user-defined output function that's activated, can save an engine from catastrophic damage. They are a must-have for all tuned performance engines, whether forced induction or naturally aspirated, fuel injected or carburated. These gauges also include six different faceplates and black and silver bezels.
Features include:
* Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
* No free air calibration required
* Internal boost sensor
* Bosch sensor included with LSU4.2, accurate to 0.1AFR
* 0-5V analog output for use with data loggers and EMS units
* Internal Boost Sensor up to 30psi
* On-Board 3+ data logger at 20hz with RPM input
* 24 Sweeping LEDS that are software programmable to create your own red/orange/green area on your gauge
* Data Analysis with AEMdata
* AEMnet compatible(CAN 2.0)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0535_zps06297210.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0535_zps06297210.jpg.html)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0536_zps97b44b69.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0536_zps97b44b69.jpg.html)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0532_zps782e90cb.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0532_zps782e90cb.jpg.html)
http://i2.photobucket.com/albums/y47/flicktitty/IMG_0529_zpscf632996.jpg (http://s2.photobucket.com/user/flicktitty/media/IMG_0529_zpscf632996.jpg.html)