PDA

View Full Version : S13 240sx Wire Tuck! Looking for Advice!


oXeNo
07-09-2013, 07:37 AM
So while I am fitting my kit on I decided to go ahead and do a wire tuck on my s13, I think I am doing pretty good. I still have a few things to finish but so far I have removed all the un neccesary wires, connectors, de pinned the ecu accordingly, and relocated the ignitor into the cabin so it sits with the ecu. I am running the EFI wires along with my battery cable under the passenger side fender. I was going to go with some braided sleeve; it looks similar to what Chase Bay uses on the harnesses they make. I don't like the casual wire wrap that you can buy from auto zone or something I wanted to make it look nice. This is my first harness that I have attempted to tuck though and none of this is final yet I just have it mocked up to where I want the wires and how I am gonna run everything. I was just wondering what everyone has used to wrap their harness with and how they routed it? This is for a sr20det btw.

http://i679.photobucket.com/albums/vv152/I3ROK3N/JUSTIN-PC/240sx/20130709_090918_zps4d367b87.jpg (http://s679.photobucket.com/user/I3ROK3N/media/JUSTIN-PC/240sx/20130709_090918_zps4d367b87.jpg.html)


http://i679.photobucket.com/albums/vv152/I3ROK3N/JUSTIN-PC/240sx/20130709_090901_zps205d6e59.jpg (http://s679.photobucket.com/user/I3ROK3N/media/JUSTIN-PC/240sx/20130709_090901_zps205d6e59.jpg.html)

http://i679.photobucket.com/albums/vv152/I3ROK3N/JUSTIN-PC/240sx/20130709_090843_zps6f691657.jpg (http://s679.photobucket.com/user/I3ROK3N/media/JUSTIN-PC/240sx/20130709_090843_zps6f691657.jpg.html)

This is similar to what I was wanting to use on this:
http://i679.photobucket.com/albums/vv152/I3ROK3N/JUSTIN-PC/240sx/F6N100BK_zps5cad71af.jpg (http://s679.photobucket.com/user/I3ROK3N/media/JUSTIN-PC/240sx/F6N100BK_zps5cad71af.jpg.html)

http://i679.photobucket.com/albums/vv152/I3ROK3N/JUSTIN-PC/240sx/F6N013BK_zps51cdb450.jpg (http://s679.photobucket.com/user/I3ROK3N/media/JUSTIN-PC/240sx/F6N013BK_zps51cdb450.jpg.html)

aznnoodleboi
07-09-2013, 01:27 PM
Those wire loom wraps are just for aesthetic looks.. they will melt beyond 150F.. You should have repinned the harness and ran them through DR25 heat shrink or at least some fire resistant wire looms and heat shrink them at the end.

Theres alot of information in this thread about wire tucking.

http://zilvia.net/f/chat/322220-wire-tuck-pic-thread.html