PDA

View Full Version : NJ After upgrade parts sale: SR20DET parts


quickdiversion
06-19-2013, 08:50 PM
First up.

S13 coilpack cover plate, was painted but chipping: Make offer
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220731.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220731.jpg.html)

S13 all working coil packs and harness, will sell whole or seperate coils: $80 for all, $20 per coil
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220722.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220722.jpg.html)

S13 fuel rail, stripped and clean, degreased and mount for unneeded spot removed. Painted gold to keep from rusting, tap still on it from painting to keep fresh: $30
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220708.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220708.jpg.html)

S13 bottom mount aluminum hot pipe, not blowoff valve mount on it. $40
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_221226.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_221226.jpg.html)

S13 stock unused headgasket: make offer
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220851.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220851.jpg.html)

S13 T25 turbo with hard water lines, front oil seal going, but not gone: $50
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220805.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220805.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220821.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220821.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220830.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220830.jpg.html)

S13 T25 piping adaptors with all bolts and gaskets, along with steel braided oil feed and restrior: $30
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220843.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220843.jpg.html)

Last but not least

S13 SR20det Cams, specs: Tomei Procams, 260 in and 260 out, 12.5 high lift, less than 10k miles on them paint marks still on the casting. Theses cams are in perfect are in perfect working condition. I upgaded. There is a small issue with the journals on the cams so make sure to look at the pictures and ask questions if you have them.

The head was ported and polished, than oiled and bagged before I finished the head. The oil passages were cleaned out and oil shavings were still in them. This cause slight scaring on the journals of the cams. The very slight damage only goes inward, meaning that they are slight grooves that will not effect performance or the journals of your head. These cams go for $170 a piece new, and $320 for the set. I'll ship them to you for $200

Exhaust:
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220939.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220939.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_220947.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_220947.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_221020.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_221020.jpg.html)

Intake:
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_221118.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_221118.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_221127.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_221127.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_221135.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_221135.jpg.html)
http://i12.photobucket.com/albums/a206/quickdiversion/for%20sale/20130619_221141.jpg (http://s12.photobucket.com/user/quickdiversion/media/for%20sale/20130619_221141.jpg.html)

Do not hesitate to write me.

kota2240
06-20-2013, 08:18 AM
do you have the fpr with the fuel rail

quickdiversion
06-20-2013, 08:22 AM
do you have the fpr with the fuel rail

I do not, i was running a Sard remote mounted one.
Sorry

kota2240
06-20-2013, 10:00 AM
what about the caps?

quickdiversion
06-20-2013, 10:07 AM
I think I have caps, actually.
I made this post late last night. I will double check.
I am however pretty sure I have them. Maybe not the screws though cause the heads were stripped out.

quickdiversion
06-23-2013, 08:04 PM
what about the caps?

I took the entire weekend to dig through everything I have, both selling and not.

I do not have the caps. I'm sorry. I'll pro-rate it if you want the rail??? 20???

quickdiversion
06-25-2013, 12:07 PM
Bump for any offers???

applefrk15
07-07-2013, 08:37 PM
are you willing to separate the coilpack harness? if so pm a price please

lucas240sx
07-07-2013, 08:45 PM
Do you have any extra valve shims??