Brake lights stay on

[conner22462]

Yesterday I found out my brake lights stay on after I turn the car and lights off. I can't figure out the issue

[Jack Bauer S14]

Probably the button that lights the tail lights got stuck somehow. It's pretty much like the switch under the hand brake.

The problem is in the s platform i don't know where that switch is. Hope it helps!

Sent from my XT910 using Tapatalk 2

[future]

Wrong. Its the pedal. There is a ruber part that gets old and breaks off. You need to find the hole and put a nut and bolt in the place

[s13livin]

Probably the button that lights the tail lights got stuck somehow. It's pretty much like the switch under the hand brake.

The problem is in the s platform i don't know where that switch is. Hope it helps!

Sent from my XT910 using Tapatalk 2

hahaa lol never knew the hand brake aluminates the brake lights.
press on the brake switch under the pedal, if they go off, you just need to adjust it.

[conner22462]

Thanks for the help ill check out it real quick

[conner22462]

Well you were right there is a broken piece of plastic that was on the brake pedal that was broke

[s13livin]

when the little plunger is all the way out theyre off when its depressed the lights are on. check if its depressed a little when your foots off the brake, if so loosen the nut, unplug the connector and adjust the switch back. don't want to adjust it too far, because u want the brake lights to come on without pressing all the way down (just with light pressure on the pedal)

edit* seems you found the problem

[Jack Bauer S14]

hahaa lol never knew the hand brake aluminates the brake lights.
press on the brake switch under the pedal, if they go off, you just need to adjust it.

Hahaha shit i got confused with the hand brake light wooopsss


Enviado desde el moñoñongo...