formsim
05-19-2013, 08:29 PM
Long story short, my sr20det had nasty blow by on #4 and blew its headgasket on track.
Tired of dealing with FI and moving to an LS1 build. Everything in the garage but the car must go.
The more you buy, the more i'm willing to work on pricing.Also i will ship but at additional cost for most items. Items not listed but shown in pictures I'm either not shipping or sold already.
TXT or PM Me - (954)-SIXSIX2-75One4
Sr20 Stuff
Fluidyne oil cooler - $75 - Decided to go a different size
SR/KA MAF - $20 removed when i removed my KA had no issues
SR powder coated cover - $40 - Powder coated satin dark red to match 30 days ago.
DSM Metal BOV - $40 - Purchased to get rid of my egay bov that was leaking and recirculated it. Is air tight and held fine up to 17psi
Lightweight flywheel - $75 - If i was rebuilding i'd keep it, has no problems, think it was 15 lbs but need to weigh again
Wiring Harness Upper + Coil pack - $150 - Removed with a working daash and zerp eletrical issues.
Stock Type X Ecu - $125 (Pending) - Engine is not type x so this ecu really did me no good :/
Misc sr20 accessory/adapters/sensors - Txt me for pricing.All but water temp is available.
Non SR Stuff
Clutch Master Cylinder + hard lines + steel line- $30 - Removing the setup for LS build Steel line improved pedal feel considerably
S13 Front End Links - $15 - replaced my oems only to replace those with a new sway bar + links
KPH Speedo - $10 - its kph...... yea don't need it
Stock mounts - $20 replaced all mine for track, nothing wrong with these
S13 knuckles + NEW Energy Bushings - $30 - Replaced all the bushings then went z32 *facepalm*
S13 Steering rack+Inners+new covers - $45 - extra, no longer need
S13 stock BMC - $15 - replaced with z32
LH and RH headlight motors - $30 - going full manual to save weight, both worked perfectly before removal
As i get more stuff i'll update this thread.
ADDITIONAL IMAGES CAN BE FOUND BELOW
Stuff For Sale (http://www.flickr.com/photos/[email protected]/sets/72157633538648448/)
TXT or PM Me if interested in anything - (954)-SIXSIX2-75One4
Tired of dealing with FI and moving to an LS1 build. Everything in the garage but the car must go.
The more you buy, the more i'm willing to work on pricing.Also i will ship but at additional cost for most items. Items not listed but shown in pictures I'm either not shipping or sold already.
TXT or PM Me - (954)-SIXSIX2-75One4
Sr20 Stuff
Fluidyne oil cooler - $75 - Decided to go a different size
SR/KA MAF - $20 removed when i removed my KA had no issues
SR powder coated cover - $40 - Powder coated satin dark red to match 30 days ago.
DSM Metal BOV - $40 - Purchased to get rid of my egay bov that was leaking and recirculated it. Is air tight and held fine up to 17psi
Lightweight flywheel - $75 - If i was rebuilding i'd keep it, has no problems, think it was 15 lbs but need to weigh again
Wiring Harness Upper + Coil pack - $150 - Removed with a working daash and zerp eletrical issues.
Stock Type X Ecu - $125 (Pending) - Engine is not type x so this ecu really did me no good :/
Misc sr20 accessory/adapters/sensors - Txt me for pricing.All but water temp is available.
Non SR Stuff
Clutch Master Cylinder + hard lines + steel line- $30 - Removing the setup for LS build Steel line improved pedal feel considerably
S13 Front End Links - $15 - replaced my oems only to replace those with a new sway bar + links
KPH Speedo - $10 - its kph...... yea don't need it
Stock mounts - $20 replaced all mine for track, nothing wrong with these
S13 knuckles + NEW Energy Bushings - $30 - Replaced all the bushings then went z32 *facepalm*
S13 Steering rack+Inners+new covers - $45 - extra, no longer need
S13 stock BMC - $15 - replaced with z32
LH and RH headlight motors - $30 - going full manual to save weight, both worked perfectly before removal
As i get more stuff i'll update this thread.
ADDITIONAL IMAGES CAN BE FOUND BELOW
Stuff For Sale (http://www.flickr.com/photos/[email protected]/sets/72157633538648448/)
TXT or PM Me if interested in anything - (954)-SIXSIX2-75One4