Z33 Engine will not start

[go7roo7]

05 350z Manual. w/ cruise control

Went to put gas and after doing so, car did not start. I could not hear the sound of the starter or starter solenoid. Guy helped me push start the Z and she started on the first try. Drove her home and began thinking.

1: Battery is good (<1 year optima red top)
2: cannot hear starter or solenoid.
3: ASCD clutch switch might be damaged (since pressing clutch (or manually pressing the ASCD button does nothing))
4: The car is not throwing any codes like crank/cam POS sensor issues. ( which can stall the car)

So I am thinking on checking out the ASCD clutch switch before I dig in to the starter.

Any other things I should look into that might be the culprit? And also what started (if mine is damaged, would you all recommend?)

Thanks! :bigthumbu


UPDATE:

I took out the ASCD switch and plugged it back in and the car started. When I turned it off and back on to re-test, the car did not turn back on and had the same symptoms. :mad:

[JBPUSA]

This has been covered before here on zilvia and on google,
http://zilvia.net/f/z-chassis/412725-new-z33-owner-w-questions.html

Its on the 3pd page of the Z section here

___________
Visit our website JB Performance 240sx parts and more (http://www.jbperformance.net)

[go7roo7]

dude I have been searching all day on google for this. I had not come across the posts on Zilvia. Thanks for the forward!