Greddy Profec II- SR20DET

[DriftVader]

Hey guys, I have a stock s13 SR20DET motor with a s14 T28 BB turbo. I'm also using a Greddy Profec II boost controller. I was wondering if anyone had any experience with this tricky thing and would recommend a good setting for stock setup? thanks.

[zombiewolf513]

Have you used google? That thing takes 10 minutes to set up

[DriftVader]

yes, i've googled it how to set up and how the profec II works. I'm mainly looking for just some recommendations on what others have set theirs too for stock set up.

[EnemyS15]

Their set up isn't yours. I know you want to hear about other setups, but you should focus on setting yours to your specific engine and what not. Picking from other setups is like playing russian roulette. You might get someone who has it set right for what he has (Truly knows what their setting is and for) or you could end up with a Floridiots "bad ass" setting, which could cause your shit to fail.

[A DOG 406]

BAM!!

http://zilvia.net/f/tech-talk/105737-profec-b-ii-boost-problems.html

[sncs14]

You just have to find a place to get some decent third and forth gear pulls and play with the settings. Every car will be different.

[ZenKi_373]

Put your % at 20
Put your gain at 15 and leave it no need to go higher
Leave your set gain at 0 for now
Put your warning at whatever psi you don't want to go over I.e. 200=20psi
Leave the L .0 at zero(set it to .1 when your done)
Now go test in 3rd gear and watch the controller increas by 6-10% percent. Then once your close to we're you wanna be at then set your set gain back by 2 from the max boost your trying to reach

Have fun.

[songgsan]

yes, i've googled it how to set up and how the profec II workshttp://www.glpp.info/hu5a.jpg

[petechason2]

Their set up isn't yours. http://gawab.anvtech.com/6.jpg
http://gawab.anvtech.com/7.jpg
http://gawab.anvtech.com/8.jpg
http://gawab.anvtech.com/9.jpg